Airsoftdepot Canada

Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
[AO5305-BK]

Price :

$129.95

This is a whole lotta scope! I didn't have the SR-25 or the M24 so I had to put it on my M4A1 ( http://airsoftdepot.ca/catalog/product_info.php?cPath=102_104&products_id=1937 ) instead. I could BARELY get it on there with such a large 50mm/2 inch objective frontal lens on it. Make no mistake! This thing is huge! 14 inches long. It practically dwarfs the M4A1 but since I didn't have anything else to mount it on? I had to try it on SOMETHING. *Make sure to buy the 30mm mounting rings!!! Glad I didn't forget!* Illumination is actually in 3 different colors. Red, green and blue. My eyes are so sensitive to light that I have to leave it off which is actually fine because the reticle is etched in black so don't panic. The adjustable zoom is very nice, the scope adjusts exactly as it should and the 50mm/2inch lens gathers so much light! Very easy to use and comes with the manual. Trades ARE included and thankfully these are mostly on the bottom since they are bright white. A must have for any sniper! To install: (*NEEDS 30mm mount rings SOLD SEPARATELY!!!*) Use the Allen wrench (included with mounting rings) and take apart the mounting rings. Place the bottom pieces onto the rails. This will take a bit of wiggle and jiggle to get them in the right spot. Snug them up just a bit and place the scope inside. Adjust the mounting ring bases, moving them to another RIS slot if needed so the scope is not obstructed. Tighten up the mounting bases. Next, place the top pieces of the mounting rings on over the scope and get the Allen screws started but DO NOT TIGHTEN YET! Make absolutely sure the reticle is lined up so it isn't twisted. If the crosshair is even SLIGHTLY OFF? It can affect your accuracy and also any adjustments made with the knobs on the scope will be ineffective. Once the crosshair is properly aligned? Slowly tighten down the screws. Tighten them all down only a few turns at a time, so as to tighten them all as evenly as possible. Be very careful with these screws! They have very fine threads which make it difficult to align properly. You don't want to force them or strip them!

by Tyler Mathewson Date Added: Wednesday 13 May, 2015

Write Review Back

Result Pages: 1

Displaying 1 to 1 (of 1 reviews)

Shopping Cart

1 x	Dual Dovetail Adapter Replaces J-Arm For PVS-14 (Aluminun)
2 x	Cybergun Licensed Colt 1911A1 GBB (Silver)
1 x	Action Army AAP-01 Compact "Assassin" Airsoft Gas Blowback Pistol BK
2 x	Cybergun DESERT EAGLE .50AE (Black)
1 x	Cybergun DESERT EAGLE .50AE (Silver)
1 x	HRG V Style Scarab Multifunctional Tactical Vest (CB)
1 x	EMERSON Wilcox style L3 Series NVG
1 x	HRG FCPC Low Profile Combat Vest (Multicam)
1 x	HRG D3CRH Tactical Chest Rig CB
1 x	Emersongear Chest Rig to Vest Adapter Kit CB
1 x	L4G24 NVG MOUNT Aluminum (DE)
1 x	FMA EXF Helmet Cover Multicam
1 x	HRG CP Style CPC Combat Vest Multicam Black
1 x	HRG 7.62/AK/DMR Triple Magazine Panel (Multicam)
1 x	HRG Adaptive Plate Carrier (500D Nylon, BK)
1 x	Multi-Angle Rotation ARC & EXFIL Rail Adapter Suspension for Earmor, Walker, & HL Series Headsets BK
1 x	FMA 3 type for 25mm Webbing (DE)
1 x	Sidewinder Stalk Style Helmet Light (4 Colors W/ IR LED, DE)
1 x	HRG Adaptive Plate Carrier Full Set(BK)
1 x	Fast Helmet Side Cover (FG)
1 x	Helmet V-Lite Marker (BK, Red)
1 x	FMA FAST Helmet Side Rail Mount Bungee Lanyard (DE)
1 x	HRG Laser-cut MOLLE Drop Leg/Shoulder Pad Platform (BK)
1 x	HRG Shoulder Pad Set (CB)
1 x	HRG Shoulder Pad Set (BK)
1 x	Tactical Helmet Mount Base (For M-LOK/Rail/Gopro, Tan)
1 x	HRG Modular Assault MK3 Chest Rig With Fanny Pack(Multicam Black
1 x	EmersomGear JPC/AVS 6x6 Side Amor Carrier Set BK
1 x	HRG Adaptive Plate Carrier Full Set(CB)
1 x	HRG Front Molle Plate (CB)
1 x	HRG Modular Assault MK3 Chest Rig (Multicam)
1 x	FMA 3 type for 25mm Webbing (FG)
1 x	HRG FCPC Low Profile Combat Vest (BK)
1 x	Multi-Angle Rotation ARC & EXFIL Rail Adapter Suspension for Earmor, Walker, & HL Series Headsets DE
1 x	TMC Dual Power Assault Mount (DE)
1 x	HRG Laser-cut MOLLE Drop Leg/Shoulder Pad Platform (OD)
1 x	FMA Fast Type Ballistic Helmet Cover (DE, Large)
1 x	FMA PVS-31 With Function Version(B)TB1284-B
1 x	MICH2002 Helmet Cover (Multicam)
1 x	HRG JPC Style Plate Carrier (Tan)
1 x	HRG CP Style CPC Combat Vest RG
1 x	HRG D3CRH Tactical Chest Rig RG
1 x	HRG Adaptive Plate Carrier (500D Nylon, CB)
1 x	HRG Shoulder Pad Set (Multicam)
1 x	Emersongear Pmac Magzine Style Powerbank Case (DE)
1 x	FMA Multifunctional Cover for Maritime Fast Helmet Multicam
1 x	Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
1 x	AP 3XMAG-1 3X Mag Magnifier Scope With Fast Mount
1 x	T-Eagle Tactical Riflescope EO1-5X24 IR W/ Mount
1 x	Elcan Style Combat Scope 3x
1 x	NF Style 1-4x Compact Rifle Scope
1 x	AIM 8-32 x 50E-SF Scope (Red / Green / Illuminated Reticle)
1 x	AD Custom Long Eye Relief Second Focal Plane Riflescope TH4-16X44SFIR (Shock-proof)
1 x	ACM TA-11 3.5X Optical Fiber Scope with RMR Sight (Perfect ver.)
1 x	Symphogear Ichaival Velcro Patch
1 x	Blood Type PVC Patch(AB, BK)
1 x	Bite Copypasta Patch
1 x	Cybergun Colt (T8/ MWS System) MK18 MOD1 GBB Airsoft Rifle
1 x	No motivation Patch
1 x	Dess From Above Patch
1 x	Cybergun Licensed Colt 1911A1 GBB (BK)
1 x	E&C HK416/417 Tactical Grip
1 x	MP Style Quick Detachable Sling Mount (M-LOK, BK)
1 x	Matrix QD Sling Swivel Adapter Mount (M-Lok)
1 x	Detachable Swivel QD Sling Mount
1 x	HRG Laser-cut MOLLE Drop Leg/Shoulder Pad Platform (Tan)
1 x	EmersonGear 22cm Suppressor Cover (Genuine Mulitcam)
1 x	WADSN Helmet Adapters Ver.1 for COMTAC Headset Tan

$7,077.53