Airsoftdepot Canada

Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
[AO5305-BK]

Price :

$129.95

This is a whole lotta scope! I didn't have the SR-25 or the M24 so I had to put it on my M4A1 ( http://airsoftdepot.ca/catalog/product_info.php?cPath=102_104&products_id=1937 ) instead. I could BARELY get it on there with such a large 50mm/2 inch objective frontal lens on it. Make no mistake! This thing is huge! 14 inches long. It practically dwarfs the M4A1 but since I didn't have anything else to mount it on? I had to try it on SOMETHING. *Make sure to buy the 30mm mounting rings!!! Glad I didn't forget!* Illumination is actually in 3 different colors. Red, green and blue. My eyes are so sensitive to light that I have to leave it off which is actually fine because the reticle is etched in black so don't panic. The adjustable zoom is very nice, the scope adjusts exactly as it should and the 50mm/2inch lens gathers so much light! Very easy to use and comes with the manual. Trades ARE included and thankfully these are mostly on the bottom since they are bright white. A must have for any sniper! To install: (*NEEDS 30mm mount rings SOLD SEPARATELY!!!*) Use the Allen wrench (included with mounting rings) and take apart the mounting rings. Place the bottom pieces onto the rails. This will take a bit of wiggle and jiggle to get them in the right spot. Snug them up just a bit and place the scope inside. Adjust the mounting ring bases, moving them to another RIS slot if needed so the scope is not obstructed. Tighten up the mounting bases. Next, place the top pieces of the mounting rings on over the scope and get the Allen screws started but DO NOT TIGHTEN YET! Make absolutely sure the reticle is lined up so it isn't twisted. If the crosshair is even SLIGHTLY OFF? It can affect your accuracy and also any adjustments made with the knobs on the scope will be ineffective. Once the crosshair is properly aligned? Slowly tighten down the screws. Tighten them all down only a few turns at a time, so as to tighten them all as evenly as possible. Be very careful with these screws! They have very fine threads which make it difficult to align properly. You don't want to force them or strip them!

by Tyler Mathewson Date Added: Wednesday 13 May, 2015

Write Review Back

Result Pages: 1

Displaying 1 to 1 (of 1 reviews)

Shopping Cart

1 x	UT AX Button Dual Switch For Aiming Device (BK,SF&3.5mm Plug)
1 x	Tactical UT Hot Button Remote Switch (Picatinay, 2.5mm plug, BK)
1 x	WADSN MAWL-C1 Red laser/IR Laser/LED Light/IR Light (BK)
1 x	Tactical UT Hot Button Remote Switch MLOK&Keymod, 3.5mm plug, BK
1 x	Sotac Remote Dual Pressure Switch Augmented Pressure Double (SF&Crane plug)
1 x	UT AX Button Switch For Aiming Device (BK, 2.5mm Plug)
1 x	Wire Guide System (M-LOK & Keymod, DE, MA Type)
1 x	FUSION Style ModButton Swtch&Mount For M300,M600 BK (2.5mm)
1 x	FMA Modlite ModButton Lite (2.5mm Plug, DE)
1 x	FMA Remote Pressure Switch for Laser Devices (Style: Crane Plug / Black)
1 x	ET OGL Aiming Device（Red&IR Laser&LED）（Aluminum, BK）
1 x	Wire Guide System (M-LOK & Keymod, BK, MA Type)
1 x	ACM L3 NGAL Red Laser W/LED Flashlight (Aluminun Version, DE)
1 x	ACM L3 NGAL Red Laser W/LED Flashlight (Aluminun Version, BK)
1 x	Tactical Mini ModButton Pressure Remote Switch DE (2.5mm plug)
1 x	Raid X Style Red/IR Laser Aiming Device DE
1 x	Tactical Mini ModButton Pressure Remote Switch BK (3.5mm plug)
1 x	ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (BK)
1 x	UT AX Button Switch For Aiming Device (DE, 2.5mm Plug)
1 x	AD Custom 2011 Hicapa RMR Mount Base (TM, JAG ARMS, Army etc)
1 x	ARES Bipod Mount for Keymod
1 x	5KU Cmore Mount For HiCapa Type 4 SV
1 x	ARES Flashlight / Laser system Mount for Keymod
1 x	FMA One Oclock Offset Mount (DE)
1 x	AIMO Metal QD 25.4-30mm RDS Mount For AK Series
1 x	AK Rear Sight Rail Mount
1 x	30mm L Mount for Red Dots / Rifle Scopes
1 x	Cyma AK QD Side Mount
1 x	5KU AK Scope Mount For T1/T2 Micro Red-dot
1 x	M16 M4 AR15 Carry Handle 20mm Weaver Rail
1 x	AD Custom P320 RMR/SRO/Doc sight Mount Plate
1 x	Adjustable Tactical Light Mount(1'' Diameter)
1 x	FAST Style Micro Mount AP T1/T2 Red Dot Riser BK
1 x	GG Style Forklift Mount Kit T1/T2 BK
1 x	G style Precision 1.93'' High Mount For T1/T2 Red Dot
1 x	FAST Style Micro Mount AP T1/T2 Red Dot Riser DE
1 x	Classic Army Metal Mount Base For M14 Series
1 x	FAST Style Tactical Riser Rail Mount BK
1 x	5KU Aimpoint Carbon Mount (Bllack, MARUI HI-CAPA)
1 x	5KU Cmore Mount For HiCapa Type 4 BK
1 x	M-LOK & Keymod Offset Picatinny Rail Mount (M300/600 Ready,DE)
1 x	GG Style Forklift Mount Kit T1/T2 DE
1 x	Double Bell G Series Competition Upgrade Kit
1 x	GG Style Forklift Mount Kit Eotech/Rail DE
1 x	FUSION Style LightWing Adapter-Right BK
1 x	FAST Style Tactical Riser Rail Mount DE
1 x	Armorer Works HX Sight Mount Kit
1 x	Fast LPVO Mount With RMR/T1/T2 Offset Mount
1 x	M-LOK SCOUT LIGHT PRO M-LOK MOUNT For Surefire Scout Light
1 x	MK18 Comp M2 Mount For Aimpoint M2/M3
1 x	Mad Hatter Classic Hat Red
1 x	Tactical UT Hot Button Remote Switch (Picatinay, 3.5mm plug, BK)
1 x	ET OGL Aiming Device（Red&IR Laser&LED）（Aluminum, DE）
1 x	UT AX Button Switch For Aiming Device (BK, 3.5mm Plug)
1 x	Tactical UT Hot Button Remote Switch MLOK&Keymod, 2.5mm plug, BK
1 x	ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (DE)
1 x	HRS PEQ-15 Class I IR Laser Aiming Device (DE)
1 x	Picatinny WireGuide System Cable Management Clip
1 x	FMA LAB PEQ-NGAL LED Light + IR Red Laser BK
1 x	EG LEAP Tactical 1.93'' Mount for Aimpont T1/T2
1 x	G Style Super Precision 1.93" Rifle Scope Mount BK
1 x	MI AK Tactical Railed Scope Mount (BK)
1 x	EG LEAP Mount For T2/T1/REMO etc
1 x	Army Staccato RMR Mounting Plate
1 x	Dropwing Adaptive Light Mounts
1 x	Night-Evolution Low Drag Mount for T1 and T2 (AO1780)
1 x	FAST FTC Style Magnifier Mount For G43 BK
1 x	AD M300/600 Offset Mount (M-LOK & Keymod, BK)
1 x	FAST LPVO Scope Mount 30mm Scope Rail Mount - BK
1 x	Mad Hatter Classic Hat BK
1 x	Dual Dovetail Adapter Replaces J-Arm For PVS-14 (Aluminun)
2 x	WiiTech A&K SVD Steel Trigger Set
3 x	WiiTech Enhanced Loading Nozzle Assembly for WA
1 x	WiiTech 92F (T.Marui) Top Gas Version Power-up Loading Nozzle se
2 x	WiiTech MP7 (KSC, KWA, Umarex) Top Gas Version Power-up Loading
3 x	T.Marui M870 barrel mount Installation Tool
1 x	Legion Baseball Cap (BK, Gold)
1 x	PVS-14 Weapon Mount QuickConnect Rail Mount Adapter
1 x	WiiTech One-way Bearing Piston Head (for Wii Tech gas cylinder)
2 x	WiiTech NGRS M4 Enhanced Hop-up Chamber
2 x	One-way Bearing Piston Head, Recoil Shock System M4 Series (TM Gas Cylinder)
1 x	JUNK Well M11 Gas Magazine (32 Rounds)
2 x	M. Receiver Rail for T.Marui M870 Tactical Shotgun
1 x	WE-TECH X3400 Airsoft Shooting BB Chronograph (Green)
1 x	S. Receiver Rail for T.Marui M870 Tactical Shotgun
1 x	Air-tight Nozzle, Recoil Shock M4
1 x	EmersonGear Tactical Assault Cap CB
1 x	Matrix Hard Knuckle Gloves (Sage, Small)
1 x	PTS Dead Air Sandman-K Tracer Unit DE
1 x	SF SOCOM MINI 2 556 Barrel Extension (DE, 14mm CCW)
1 x	PERUN V2 Optical Mosfet - Rear Wired
1 x	WELL Pro WE23-H Rotary Minigun
1 x	Valken Metal Propane Adapter
1 x	PTS Dead Air Sandman-K Barrel Extension BK
1 x	WST 6.3 inch 14mm CCW Flash Tracer Surpressor BK
1 x	WE G-Series/Hicapa Gas Magazine Fill Valve
2 x	PTS Enhanced Polymer Trigger Guard (AEG, DE)
1 x	BB Loader (100 rds)
1 x	Well Pro 2800RD Magazine For WE23-X/Plus/H MINIGUN
1 x	5KU 32mm Spitfire Tracer Insert for Silence Tube (Ver.2)
1 x	WELL Pro PCC X9 SMG (Gen2, ETU Ver., 30RPS)
1 x	Amomax Per-Fit Holster (Fits over 80 handguns, BK, Left-hand)
1 x	Cytac/Amomax Molle Adapter (Holster/Mag)
1 x	Matrix SFL Kydex Quickdraw Holster (G17/19/19X/45)
1 x	Cytac/Amomax Holster For STI/Hicapa (BK, Left-handed)
1 x	EMERSON LBT6119A Style Hydration Pouch 2L (CB)
1 x	WE TECH TT33 Full Metal GBB Pistol(BK)
1 x	FMA Caiman Bump Helmet (New Liner Gear Adjustment, L/XL, BK)
1 x	EG ACOG Style 4x32 W/ RMR (Perfect Ver.,BK)
1 x	FMA Caiman Bump Helmet (New Liner Gear Adjustment, M/L, RG)
1 x	HRG JPC Style Plate Carrier (Tan)
1 x	HRG D3CRH Tactical Chest Rig RG
1 x	HRG FCPC Low Profile Combat Vest (Multicam)
1 x	HRG Quick Release Combat Belt Multicam
1 x	Place Holder 11
1 x	Helmet Tide Pod Identification Marker (Red)
1 x	FMA Fast Type Ballistic Helmet Cover (OD, Large)
1 x	FMA PVS-18 Dummy
1 x	Helmet V-Lite Marker (DE, Red)
1 x	Multi-Angle Rotation ARC & EXFIL Rail Adapter Suspension for Earmor, Walker, & HL Series Headsets BK
1 x	FMA High Cut Fast Helmet Cove (Multicam, Medium)
1 x	Fast Helmet Rail (Maritime Cut, FG)
1 x	EMERSON Wilcox style L3 Series NVG
1 x	Well G296D Full Metal 6mm CO2 Swing Out Revolver (Black)
1 x	PTS Dead Air Sandman-S Barrel Extension DE
1 x	ACOG Killflash (Marking Ver. ,BK)
1 x	T-Eagle Tactical Riflescope EO1-5X24 IR W/ Mount
1 x	Aqualung Survival Egress Air MKII Dummy
1 x	SI Cobra Billet Trigger Guard Red (For AEG)
1 x	Double Bell AK74N (Steel, Real Wood, QD Gearbox, 2021 Ver. Two Magazines Ver.)
1 x	DOMINATOR™ 12 GAUGE GAS SHOTGUN SHELLS - GREEN (25 SHELLS/PACK)
1 x	Double Bell AKMS (Steel , Real Wood, QD Gearbox, Two Magazines Ver.)
1 x	Armorer Works Tactical Carbine Kit - Glock/VX SERIES BK
1 x	E&C Dartle M4/M16 Magazine (140rds, 5pcs Pack)
1 x	Cybergun DESERT EAGLE .50AE (Silver)
1 x	PTS Dead Air Sandman-S Tracer Unit DE
1 x	4UANTUM Friction Pro-High Performance Bucking (AEG)
1 x	Armorer Works 5.1 Gas Magazine (SV, 30 rounds, TM/WE compatible)
1 x	SHS Cut Off Lever Ver.3 (Steel)
1 x	E&C Ver. 2 Cylinder Complete Upgrade Set
1 x	Modify Cut Off Lever Ver.2 (Steel)
1 x	SHS Spring Set Version2
1 x	Modify Tappet Ver. 3
1 x	SHS Speed-Up Gear Set for V2/3 AEG GENIII (18:1, CL14002)
1 x	SHS Speed-Up Gear Set for V2/3 AEG GENIII (13:1, CL14006)
1 x	Modify Full Tune-up Kit for AK-47/47S (Torque 21.6/ S120+)
1 x	Well Pro Lancer Style M4 Pro-fit Magazine 180rds
1 x	Well Pro Lancer Style M4 Pro-fit Magazine 180rds 3pcs Set
1 x	Eshooter Flare Mono Tracer Unit
1 x	10x each fluorine O-RING for GBB gun&Magazine W/Silicon Oil
1 x	Inline Scout Pro Mount M-LOK & Keymod For M300/600 Series

$11,277.17