CALL US :416-298-3303
Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)

Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
[AO5305-BK]

Price :
$129.95
5 of 5 Stars!
This is a whole lotta scope! I didn't have the SR-25 or the M24 so I had to put it on my M4A1 ( http://airsoftdepot.ca/catalog/product_info.php?cPath=102_104&products_id=1937 ) instead. I could BARELY get it on there with such a large 50mm/2 inch objective frontal lens on it. Make no mistake! This thing is huge! 14 inches long. It practically dwarfs the M4A1 but since I didn't have anything else to mount it on? I had to try it on SOMETHING. *Make sure to buy the 30mm mounting rings!!! Glad I didn't forget!* Illumination is actually in 3 different colors. Red, green and blue. My eyes are so sensitive to light that I have to leave it off which is actually fine because the reticle is etched in black so don't panic. The adjustable zoom is very nice, the scope adjusts exactly as it should and the 50mm/2inch lens gathers so much light! Very easy to use and comes with the manual. Trades ARE included and thankfully these are mostly on the bottom since they are bright white. A must have for any sniper! To install: (*NEEDS 30mm mount rings SOLD SEPARATELY!!!*) Use the Allen wrench (included with mounting rings) and take apart the mounting rings. Place the bottom pieces onto the rails. This will take a bit of wiggle and jiggle to get them in the right spot. Snug them up just a bit and place the scope inside. Adjust the mounting ring bases, moving them to another RIS slot if needed so the scope is not obstructed. Tighten up the mounting bases. Next, place the top pieces of the mounting rings on over the scope and get the Allen screws started but DO NOT TIGHTEN YET! Make absolutely sure the reticle is lined up so it isn't twisted. If the crosshair is even SLIGHTLY OFF? It can affect your accuracy and also any adjustments made with the knobs on the scope will be ineffective. Once the crosshair is properly aligned? Slowly tighten down the screws. Tighten them all down only a few turns at a time, so as to tighten them all as evenly as possible. Be very careful with these screws! They have very fine threads which make it difficult to align properly. You don't want to force them or strip them!
by Tyler Mathewson Date Added: Wednesday 13 May, 2015
Write Review Back

Result Pages:  1 

Displaying 1 to 1 (of 1 reviews)

1 x UTX Hydration Tube Molle Clip
1 x ACM L3 NGAL Red Laser W/LED Flashlight (Aluminun Version, DE)
1 x Laser Bore Sight Collimator
1 x UT AX Button Switch For Aiming Device (BK, 3.5mm Plug)
1 x ET OGL Aiming Device(Red&IR Laser&LED)(Aluminum, DE)
1 x FMA Modlite ModButton Lite (2.5mm Plug, DE)
1 x WADSN MAWL-C1 Red laser/IR Laser/LED Light/IR Light (BK)
1 x ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (DE)
1 x JUNK Well M11 Gas Magazine (32 Rounds)
1 x Tactical UT Hot Button Remote Switch MLOK&Keymod, 2.5mm plug, BK
1 x UT AX Button Switch For Aiming Device (BK, 2.5mm Plug)
2 x ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (BK)
1 x Raid X Style Red/IR Laser Aiming Device DE
1 x Tactical Mini ModButton Pressure Remote Switch BK (3.5mm plug)
1 x Raid X Style Red/IR Laser Aiming Device BK
1 x Sotac X300/X400 Remote Dual Switch Assembly BK
1 x Wire Guide System (M-LOK & Keymod, BK, MA Type)
1 x Tactical UT Hot Button Remote Switch MLOK&Keymod, 3.5mm plug, BK
2 x Tactical Mini ModButton Pressure Remote Switch BK (2.5mm plug)
1 x Sotac Remote Dual Pressure Switch Augmented Pressure Double (SF&Crane plug)
1 x FUSION Style ModButton Swtch&Mount For M300,M600 BK (2.5mm)
2 x UT AX Button Dual Switch For Aiming Device (BK,SF&3.5mm Plug)
1 x Tactical UT Hot Button Remote Switch (Picatinay, 2.5mm plug, BK)
2 x HRS PEQ-15 Class I IR Laser Aiming Device (DE)
1 x FMA Remote Pressure Switch for Laser Devices (Style: Crane Plug / Black)
1 x Wire Guide System (M-LOK & Keymod, DE, MA Type)
1 x ACM L3 NGAL Red Laser W/LED Flashlight (Aluminun Version, BK)
1 x Tactical Mini ModButton Pressure Remote Switch DE (2.5mm plug)
1 x FMA LAB PEQ-NGAL LED Light + IR Red Laser BK
1 x UT AX Button Switch For Aiming Device (DE, 2.5mm Plug)
1 x Picatinny WireGuide System Cable Management Clip
1 x Tactical UT Hot Button Remote Switch (Picatinay, 3.5mm plug, BK)
1 x WST Shotgun Shell Holder (Medium, BK)
2 x ET OGL Aiming Device(Red&IR Laser&LED)(Aluminum, BK)
1 x HRG JPC Style Plate Carrier (Tan)
1 x HRG FCPC Low Profile Combat Vest (RG)
1 x EmersonGear Tactical Assault Cap BK
1 x HRG JPC Style Plate Carrier (OD)
1 x HRG JPC Style Plate Carrier (BK)
1 x HRG 5.56/M4 Quadruple Magazine Panel (Multicam)
1 x EmersonGear Tactical Assault Cap RG
1 x HRG Shoulder Pad Set (CB)
1 x HRG CP Style CPC Combat Vest CB
1 x HRG Front Molle Plate (RG)
1 x HRG Adaptive Chest Rig (Crye Precision Mulitcam)
1 x HRG Modular Assault MK3 Chest Rig With Fanny Pack(Multicam Black
1 x Navy Seal VIP IR LED Light (Functional Ver., BK)
1 x CD R-Style Micro Flashlight BK
1 x SF X400 Tactical LED Pistol Light w/ Red Laser DE
2 x Sig Sauer P320 ASP, .177 Caliber, BK
1 x SF M300/600 Series Tail Button Switch
1 x Night Evolution Dual Function Tape Switch (NE 07010)
1 x SF M600C Mini Scout Light W/ Modbutton Switch (DE, 340 Lumens)
1 x ED Wire Guide Clip (M-LOK&Keymod, DE)
1 x FUSION Style ModButton Switch&Mount For M300,M600 BK(Flashlight)
1 x SF M340C Mini LowPro Lighting Flash Lights (BK)
1 x Helmet V-Lite Marker (DE, Red)
1 x FUSION Style ModButton Swtch&Mount For M300,M600 DE (3.5mm)
1 x ML PLHv2-PDW350 Light BK
1 x Night Evolution HELMET LIGHT SET GEN 3 (BK)
1 x Night Evolution Tactical Augmented Pressure Switch(2x3.5mm,BK)
1 x VFC AEG M4 Nozzle (Polymer)
2 x A&K/E&C M110 190 rds midcap magazine
1 x Double Bell SCAR-H 90rds Mid-cap Magazine DE
1 x Classic Army 40 Rounds Mid-Cap Magazine for SVD AEG series
1 x A&K/E&C M110 360 rds hicap magazine
1 x CYMA G36 Mid-Cap Magazine (130 rds)
1 x Snow Wolf AUG 180Rds Midcap Magazine
1 x T.Marui M870 barrel mount Installation Tool
1 x Army Armament 1911 Green Gas Magazine (28rds)
1 x Army Armament Extended 1911 Magazine W/Base Pad
1 x E&C 130rds M110/SR25 Midcap Magazine
1 x WE High Power Browning Magazine (20 Rds)
1 x KJWorks P-09 Magazine (Green Gas)
1 x KWC CZ 75 CO2 Magazine
1 x EMG / SALIENT ARMS INTERNATIONAL™ BLU GAS COMPACT MAGAZINE
1 x EMG/ARCHON Type B Gas Magazine
1 x Armorer Works VX7/Glock Series (Standard Slide Ver. ) Magazine
1 x WE PX4/Bulldog Magazine
1 x Cybergun WE Desert Eagle .50AE 27 rds Spare Magazine - Green Gas
1 x WE/Cybergun P228/229 Green Gas Magazine (Commercial Version)
1 x CowCow AAP-01 Steel Trigger Lever
1 x Bell Replacement Hopup With 7'' Barrel For G Series (For TM, Bel
1 x Armorer Works VX/G-Series Nozzle Assembly RMR/MOS Ver.
1 x Bell 1911 Plastic Grip Panels (Tan)
2 x E&C G Series Slide Lock Spring
1 x Double Bell M9 Metal Parts Set (KSC spec)
1 x CowCow AAP-01 200% Nozzle Return Spring
1 x G17 Complete Nozzle Housing Assembly (For WE,TM,E&C etc.)
1 x Bell M9 Metal Nozzle
2 x Double Bell TM M92 Gas Powered Gel Blaster Plastic Parts Set
1 x HM Brace Glock Kit Holster
2 x WiiTech G Series 17 Series (WE) CNC Hardened Steel Hammer
1 x Pro-Arms 130% Steel Recoil Rod Set For Umarex Glock 19 Gen3
2 x CAA Airsoft MICRO RONI G5 Pistol-Carbine Conversion for Glock
2 x Wii Tech Glock (T.Marui) CNC Steel Enhanced Sear
2 x Bell Glock Series Nozzle Housing Set (TM, Bell Compatible)
1 x E&C G17 Slide (Full metal, engraved marking)
2 x Bell G17 Screw Set (For G Series GBB Pistol)
1 x Pro-Arms Steel Sights w/Tritium For Umarex Glock 17 Gen4/19 Gen3
2 x Matrix CNC Aluminum Extended Magazine Release for Glock BK
2 x 5KU Lightweight CNC Aluminum bolt for AAP-01 GBB Gold
1 x GunsModify 125% SS Recoil Spring Guide Set- G17/G18C BK
2 x WE G-Series/Hicapa Gas Magazine Fill Valve
1 x CowCow SS G Fire Pin Lock For TM & Umarex G-Series, AAP01 & WE
1 x Bell M9 Rubber Parts Set (For KSC M9 Series GBB Pistol)
1 x Matrix CNC Aluminum Extended Magazine Release for Glock Red
1 x Maple Leaf Hopup Adjustment Wheel Marui/WE GBB Pistols
1 x Matrix CNC Aluminum Extended Magazine Release for Glock Grey
2 x WiiTech G Series 17 Series (T.Marui) CNC Hardened Steel Hammer
1 x Army TTI Combat Master G17/G34 GBB Pistol Magwell
1 x Bell 1911 Plastic Grip Panels (Brown)
1 x 5KU Lightweight CNC Aluminum bolt for AAP-01 GBB BK
2 x 5KU Lightweight CNC Aluminum bolt for AAP-01 GBB Blue
1 x CowCow AAP-01 Trigger TypeA Black
2 x 5KU Lightweight CNC Aluminum bolt for AAP-01 GBB Red
2 x Maple Leaf Hop-up chamber for WE/TM G-Series
1 x Army Armament G Series Extended Magwell
2 x CowCow AAP-01 Enhanced Complete Nozzle Set
1 x Bell 1911 Plastic Grip Panels (Gray)
2 x WiiTech Glock (T.Marui) CNC Steel Knocker
2 x Bell ZEW Chrome CNC Aluminum Slide Set For G Series 17 (For TM,B
1 x E&C G Series Loading Nozzle (For E&C/WE G17/19/19x Series)
1 x E&C G Series Loading Nozzle (For E&C/TM G18)
1 x E&C G17 Threaded Outer Barrel (11mm CCW)
1 x HM Flux Style Brace w/ holster set For Glock GBB Series
1 x AD Custom Specter DR Gen 3 Polycarbonate Lens Protector (Clear l
1 x ACOG Killflash (Marking Ver. ,BK)
1 x AD Custom Polycarbonate Lens Protector (Dia. 38mm, For MRO etc.)
1 x WiiTech BB Proof Lens, Trijicon MRO Sight (Tan)
1 x AD Custom Polycarbonate Lens Protector (Eotech)
1 x Matrix CNC Aluminum Extended Magazine Release for Glock Gold
1 x CowCow AAP-01 Trigger TypeA Silver
1 x G18 Complete Nozzle Housing Assembly (For TM spec and E&C etc.)
1 x AD Custom TTI Style Glock Magwell (For Gen3/Gen4)
1 x E&C Trigger Unit for G-Series GBB Pistol
$8,603.42
Share Product
 Share via E-Mail  
 Share on Facebook  Share on Twitter