Airsoftdepot Canada

Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
[AO5305-BK]

Price :

$129.95

This is a whole lotta scope! I didn't have the SR-25 or the M24 so I had to put it on my M4A1 ( http://airsoftdepot.ca/catalog/product_info.php?cPath=102_104&products_id=1937 ) instead. I could BARELY get it on there with such a large 50mm/2 inch objective frontal lens on it. Make no mistake! This thing is huge! 14 inches long. It practically dwarfs the M4A1 but since I didn't have anything else to mount it on? I had to try it on SOMETHING. *Make sure to buy the 30mm mounting rings!!! Glad I didn't forget!* Illumination is actually in 3 different colors. Red, green and blue. My eyes are so sensitive to light that I have to leave it off which is actually fine because the reticle is etched in black so don't panic. The adjustable zoom is very nice, the scope adjusts exactly as it should and the 50mm/2inch lens gathers so much light! Very easy to use and comes with the manual. Trades ARE included and thankfully these are mostly on the bottom since they are bright white. A must have for any sniper! To install: (*NEEDS 30mm mount rings SOLD SEPARATELY!!!*) Use the Allen wrench (included with mounting rings) and take apart the mounting rings. Place the bottom pieces onto the rails. This will take a bit of wiggle and jiggle to get them in the right spot. Snug them up just a bit and place the scope inside. Adjust the mounting ring bases, moving them to another RIS slot if needed so the scope is not obstructed. Tighten up the mounting bases. Next, place the top pieces of the mounting rings on over the scope and get the Allen screws started but DO NOT TIGHTEN YET! Make absolutely sure the reticle is lined up so it isn't twisted. If the crosshair is even SLIGHTLY OFF? It can affect your accuracy and also any adjustments made with the knobs on the scope will be ineffective. Once the crosshair is properly aligned? Slowly tighten down the screws. Tighten them all down only a few turns at a time, so as to tighten them all as evenly as possible. Be very careful with these screws! They have very fine threads which make it difficult to align properly. You don't want to force them or strip them!

by Tyler Mathewson Date Added: Wednesday 13 May, 2015

Write Review Back

Result Pages: 1

Displaying 1 to 1 (of 1 reviews)

Shopping Cart

1 x	Dominator International Dominator™ Micro 3 HPA Air Regulator W/ Lock
1 x	Wolverine Airsoft 18 Wire Harness (Gen. 2)
1 x	Mad Hatter Classic Hat Red
1 x	Sena Bonbon Vtuber Patch
1 x	EMG TTI Sand Viper Combat Master GBB Airsoft (TT-SV0100)
1 x	HRG V Style Scarab Multifunctional Tactical Vest (RG)
1 x	Canik x Salient Arms TP9 Elite Combat Airsoft Training Pistol (FDE)
1 x	Japari Coin
1 x	Sig Sauer Proforce M17 Airsoft Training Pistol (CO2)
1 x	OWO JDAM Patch
1 x	EMG TTI Pit Viper Combat Master GBB Airsoft
1 x	Valken Adult Knee Pads (1 Pair) Tan
1 x	HRG CP Style CPC Combat Vest RG
1 x	HRG Adaptive Plate Carrier (500D Nylon, CB)
2 x	HRG CP Style CPC Combat Vest Multicam Black
1 x	HRG 7.62/AK/DMR Triple Magazine Panel (CB)
1 x	No motivation Patch
1 x	BFG Universal ULoop Quick-detach Sling Buckle
1 x	5KU A-1 Sling swivel Mount
1 x	KUBLAI Adjustable M-Lock Sling Stud QD Bipod
1 x	RSA Sling Mount (QD Version)
1 x	Detachable Swivel QD Sling Mount
1 x	Cyma Ak Airsoft Rear Single Point Ambidextrous Sling Plate
1 x	MBUS Front/Rear Flip-up Sights (Gen2, BK)
1 x	SOTAC SI Style Quick Detach Sling swivel Loop (Steel)
1 x	Matrix QD Sling Swivel Adapter Mount (M-Lok)
1 x	RSA Sling Mount
1 x	Harris Style Bidpod With Rail Adaptor
1 x	MBUS Pro Metal Front/Rear Sights (With marking)
1 x	PTS Low Profile QD Sling Swivel - S
1 x	Bipod Grip
1 x	Sniper Outer Barrel Extension
1 x	M870 SGA Kit (DE, For PPS, Dominator, Real Steel)
1 x	Amoeba External Barrel for Striker Sniper Rifle (AS-OB-003-L)
1 x	E&C 416 10.5'' Aluminum Outer Barrel (for AEG)
1 x	Madbull 2'' Barrel Extension 14mmCCW
1 x	EMG TTI Combat Master Alpha GBB Airsoft (TT-CM0300)
1 x	Cyma CM077 AK Pistol Grip (BK)
1 x	HRG JPC Style Plate Carrier (Tan)
1 x	EmersomGear JPC/AVS 6x6 Side Amor Carrier Set BK
1 x	HRG V Style Scarab Multifunctional Tactical Vest (BK)
1 x	EmersonGear CP Style Adaptive Vest -Heavy Version (MCTP 500D)
1 x	HRG Adaptive Plate Carrier Full Set(CB)
1 x	PTS Enhanced Polymer Grip - Compact (EPG-C) AEG OD
1 x	HRG CP Style CPC Combat Vest CB
1 x	HRG D3CRH Tactical Chest Rig RG
1 x	Amomax Slim MOLLE Attachment
1 x	HRG Modular Assault MK3 Chest Rig With Fanny Pack(Multicam Black
1 x	HRG 5.56/M4 Quadruple Magazine Panel (RG)
1 x	Canik x Salient Arms TP9 Elite Combat Airsoft Training Pistol BK
1 x	HRG Front Molle Plate (BK)

$5,225.59