Airsoftdepot Canada

Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
[AO5305-BK]

Price :

$129.95

This is a whole lotta scope! I didn't have the SR-25 or the M24 so I had to put it on my M4A1 ( http://airsoftdepot.ca/catalog/product_info.php?cPath=102_104&products_id=1937 ) instead. I could BARELY get it on there with such a large 50mm/2 inch objective frontal lens on it. Make no mistake! This thing is huge! 14 inches long. It practically dwarfs the M4A1 but since I didn't have anything else to mount it on? I had to try it on SOMETHING. *Make sure to buy the 30mm mounting rings!!! Glad I didn't forget!* Illumination is actually in 3 different colors. Red, green and blue. My eyes are so sensitive to light that I have to leave it off which is actually fine because the reticle is etched in black so don't panic. The adjustable zoom is very nice, the scope adjusts exactly as it should and the 50mm/2inch lens gathers so much light! Very easy to use and comes with the manual. Trades ARE included and thankfully these are mostly on the bottom since they are bright white. A must have for any sniper! To install: (*NEEDS 30mm mount rings SOLD SEPARATELY!!!*) Use the Allen wrench (included with mounting rings) and take apart the mounting rings. Place the bottom pieces onto the rails. This will take a bit of wiggle and jiggle to get them in the right spot. Snug them up just a bit and place the scope inside. Adjust the mounting ring bases, moving them to another RIS slot if needed so the scope is not obstructed. Tighten up the mounting bases. Next, place the top pieces of the mounting rings on over the scope and get the Allen screws started but DO NOT TIGHTEN YET! Make absolutely sure the reticle is lined up so it isn't twisted. If the crosshair is even SLIGHTLY OFF? It can affect your accuracy and also any adjustments made with the knobs on the scope will be ineffective. Once the crosshair is properly aligned? Slowly tighten down the screws. Tighten them all down only a few turns at a time, so as to tighten them all as evenly as possible. Be very careful with these screws! They have very fine threads which make it difficult to align properly. You don't want to force them or strip them!

by Tyler Mathewson Date Added: Wednesday 13 May, 2015

Write Review Back

Result Pages: 1

Displaying 1 to 1 (of 1 reviews)

Shopping Cart

1 x	Legion Baseball Cap (BK, Gold)
1 x	Mad Hatter Classic Hat BK
1 x	Ztactical TEA Style PTT (Motorola Single Pin)
1 x	Tactical MOLLE Safe Case For Phone&accessories (BK)
1 x	E&C 417 Polymer Mid-cap Magazine 110 BBS
1 x	SF Style Warcomp 5.56 Flash Hider (CCW-14mm)
1 x	Double Bell M4 75rd AEG Mid-cap Magazine W/ TTI Style Base (Marking ver.)
1 x	PTS Dead Air Sandman-S Barrel Extension BK
1 x	Double Bell AK74 Charging Handle
1 x	Double Bell DB-90/P90 Midcap Magazine (60rds)
1 x	Dominator™ 8+1 Magazine Extension Tube For DM870
1 x	Steel QD Swivel (A)
1 x	M4x25mm screw with nut
1 x	Zenitco Style PK-6 Vertical Grip (Nylon Ver.)
1 x	Evolution Aluminum Vertical Grip (Long, Keymod)
1 x	MOE Style Polymer Rails (BK)
1 x	AD Custom M-LOK 5 slots rail
1 x	Evolution Aluminum Vertical Grip (Short, Keymod)
1 x	B5 Style Handstop Standard (M-LOK, BK)
1 x	Matrix Tactical Balaclava Gen2 CB
1 x	VSS Magazine (Hicap, 200 rounds)
1 x	Ares M45 55rds Shorty Midcap Magazine
2 x	HighReady Gear Tactical Agile Pack OD(Molle ready, Sportline)
1 x	HRG Modular MK3 Assault Pack (BK)
2 x	HRG Modular MK3 Assault Pack (Multicam Black)
1 x	10x each fluorine O-RING for GBB gun&Magazine W/Silicon Oil
1 x	AD Custom Oil-Resistant Gas Fill O-Ring Set for Airsoft Gas Gun
1 x	Maple Leaf Autobot 70 degree GBB/VSR Hop-Up Rubber
3 x	Army Armament R36K GBB Rifle (Two Magazines Ver.)
2 x	WST Modular Assault Pack (Gen2, BK)
3 x	HighReady Gear Tactical Agile Pack DE (Molle ready, Sportline)
1 x	WST Modular Assault Pack (Gen2, Multicam)
1 x	Pyramex Highlander Plus
1 x	Matrix Anti-fog Goggle /w Mask (BK, Built-in 2 Stage Fan)
2 x	Emerson BOOGIE REGULATOR GOGGLE CLEAR VER. (Asian fit)
1 x	Pyramex Capstone 500 Series (Dual lens Ver.)
1 x	Pilot Face Mask w/ Steel Mesh Lower Face Protection OD
1 x	Matrix Metal Skull Mask (RG)
1 x	Pilot Face Mask w/ Steel Mesh Lower Face Protection Tan
1 x	E&C SI GRIDLOK 7'' PDW(AD Custom Marking Ver. )
1 x	E&C XM177E2 (AD Custom, Marking Ver.)
1 x	Double Bell G36C Airsoft AEG Rifle
1 x	Double Bell CAR-15 N23 PDW M4 Airsoft AEG Rifle
1 x	Cybergun Colt (T8/ MWS System) MK18 MOD1 GBB Airsoft Rifle
1 x	E&C URG-I SMR MK8 13.5'' AEG (AD Custom Marking Edition)
1 x	E&C SI GRIDLOK 8.5'' PDW(AD Custom Marking Ver. )
2 x	HRG Laser-cut MOLLE Drop Leg/Shoulder Pad Platform (OD)
2 x	HRG Drop Pouch/Fanny Pack For AVS JPC CPC (OD)
2 x	HRG JPC Style Plate Carrier (BK)
1 x	HRG Foldable Dump Pouch Tan
2 x	HRG Drop Pouch/Fanny Pack For AVS JPC CPC (BK)
1 x	HRG Modular Assault MK3 Chest Rig (Multicam Black)
1 x	HRG Laser-cut MOLLE Drop Leg/Shoulder Pad Platform (BK)
1 x	HRG JPC Style Plate Carrier (Tan)
1 x	HRG D3CRH Tactical Chest Rig BK
1 x	HRG Helmet Cover For Airframe Helmet (Multicam)
1 x	HRG CP Style CPC Combat Vest RG
2 x	HRG Adaptive Plate Carrier (500D Nylon, BK)
2 x	HRG Foldable Dump Pouch OD
2 x	HRG Laser-cut MOLLE Drop Leg/Shoulder Pad Platform (Tan)
2 x	HRG Graphene 11.1V Lipo Battery (20C, 1100mAh, Tamiya)
2 x	HRG Adaptive Plate Carrier Full Set(CB)
1 x	HRG Graphene 11.1V Lipo Battery (AK Type, 20C, 1200mAh)
2 x	HRG Graphene 11.1V Lipo Battery (20C, 1100mAh, Dean)
2 x	HRG Modular Assault MK3 Chest Rig (BK)
1 x	HRG JPC Style Plate Carrier (OD)
2 x	HRG D3CRH Tactical Chest Rig RG
2 x	HRG D3CRH Tactical Chest Rig CB
2 x	HRG Helmet Cover For Airframe Helmet (Multicam Black)
1 x	E&C 417 Heavy Assault Rifle AEG (AD Custom Ver.)
1 x	HRG Graphene 7.4V Lipo Battery (20C, 1100mAh, Dean)
1 x	HRG Drop Pouch/Fanny Pack For AVS JPC CPC (Multicam Black)
1 x	HighReady Gear Tactical LED Flashlight (500 Lumens)
1 x	HRG CP Style CPC Combat Vest CB
1 x	HRG Gen 3 Knee/elbow Pads (BK)
1 x	HRG Graphene 11.1V Lipo Battery (20C, 2200mAh, Tamiya)
1 x	HRG Medium-Sized Portable Pistol Bag (Tan)
1 x	HRG CP Style CPC Combat Vest Multicam Black
1 x	HRG Drop Pouch/Fanny Pack For AVS JPC CPC (Multicam)
1 x	HRG Graphene 11.1V PEQ Lipo Battery (20C, 1300mAh, Tamiya)
1 x	HRG Foldable Dump Pouch BK
1 x	HRG Adaptive Plate Carrier Full Set(BK)
1 x	HRG Graphene 7.4V PEQ Lipo Battery (20C, 1300mAh, Tamiya)
1 x	HRG Graphene 7.4V Lipo Battery (20C, 1100mAh, Tamiya)
1 x	HRG Adaptive Plate Carrier (500D Nylon, CB)
1 x	HRG Modular Assault MK3 Chest Rig (CB)
1 x	HRG Pistol Pouch (RG)
1 x	HRG Shoulder Pad Set (Multicam)
1 x	HRG Tactical Molle Combat Belt (Gen2, Multicam)
1 x	WST Modular Assault Pack (Gen2, CB)
1 x	HRG Quad Magazine Holder Insert (Gen 2, For MP7 Magazine)
1 x	HRG Tactical Quick Release MOLLE Riggers Belt Tan (Gen2)
1 x	HRG SMG Long Type Magazine Pouch (CB)
1 x	HRG Modular Assault MK3 Chest Rig (Multicam)
1 x	HRG SMG Long Type Magazine Pouch (BK)
1 x	HRG Zip-On Backpack For JPC 2.0 (OD)
1 x	HRG Quad Magazine Holder Insert (Gen 2, For MP5 Magazine)
1 x	HRG Modular Assault MK3 Chest Rig With Fanny Pack(Multicam Black
1 x	HRG SMG Magazine Insert Tan
1 x	HRG Tactical Molle Combat Belt Multicam
1 x	HRG Tactical Molle Combat Belt (Gen2, CB)
1 x	HRG Shoulder Pad Set (BK)
1 x	HRG Pistol/Rifle Magazine Pouch (CB)
1 x	Army Armament R17 Gen4 GBB Airsoft Pistol BK (Marking Ver.)
1 x	EMG/Army Armament R618 Staccato Licensed XC 2011 GBB Airsoft Pistol
1 x	Army Glock Hammer Assembly
1 x	Army Armament AUG Carbine AEG W/ 1.5X Scope (OD)
1 x	Army Armament Full Metal R31 Classic 1911 GBB Pistol BK
1 x	Army Armament TTI Combat Master G34 Airsoft GBB Pistol
1 x	Army Armament G Series Extended Magwell
1 x	Army Armament Full Metal R32 GBB Airsoft Pistol (Black)
1 x	Army Armament Pit Viper Rear Sight
1 x	Army Armament R610-3 Lim-Cat Style 4.3 Hicapa GBB Airsoft Pistol BK
1 x	Army Armament Full Metal R32 GBB Airsoft Pistol (Tan)
1 x	Army Armament Full Metal R45A1 GBB Pistol (BK)
1 x	Army Armament Full Metal R28 1911 Warrior GBB Airsoft Pistol Tan
1 x	Army Armament 1911 Green Gas Magazine (28rds)
1 x	ARMY ARMAMENT TTI Sand Viper Airsoft Magazine Base
1 x	Army Armament Staccato DVC P GBB Airsoft Pistol (RMR ready, BK)
1 x	Army Armament 1911/R501/R601/R614 Enhanced Loading Nozzle
1 x	Army Ambidextrous Thumb Rest For Glock
1 x	Army Armament R45 Series Green Gas Magazine (18rds)
1 x	Army Armament AUG A3 Carbine AEG OD
1 x	WWII USA ARMY X Harness
1 x	WWII M1 Cartridge Belt
1 x	WWII German Army Full Gear Kit
1 x	VSG-S Grip For Rail (BK)
1 x	Matrix 14CCW Threaded Mock Silencer Adapter for Tanaka M700
1 x	BFG Universal ULoop Quick-detach Sling Buckle
1 x	WeaponLink Backplane MOLLE Adapter
1 x	CQD Front Attachment Point

$13,387.61