CALL US :416-298-3303
Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)

Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
[AO5305-BK]

Price :
$129.95
5 of 5 Stars!
This is a whole lotta scope! I didn't have the SR-25 or the M24 so I had to put it on my M4A1 ( http://airsoftdepot.ca/catalog/product_info.php?cPath=102_104&products_id=1937 ) instead. I could BARELY get it on there with such a large 50mm/2 inch objective frontal lens on it. Make no mistake! This thing is huge! 14 inches long. It practically dwarfs the M4A1 but since I didn't have anything else to mount it on? I had to try it on SOMETHING. *Make sure to buy the 30mm mounting rings!!! Glad I didn't forget!* Illumination is actually in 3 different colors. Red, green and blue. My eyes are so sensitive to light that I have to leave it off which is actually fine because the reticle is etched in black so don't panic. The adjustable zoom is very nice, the scope adjusts exactly as it should and the 50mm/2inch lens gathers so much light! Very easy to use and comes with the manual. Trades ARE included and thankfully these are mostly on the bottom since they are bright white. A must have for any sniper! To install: (*NEEDS 30mm mount rings SOLD SEPARATELY!!!*) Use the Allen wrench (included with mounting rings) and take apart the mounting rings. Place the bottom pieces onto the rails. This will take a bit of wiggle and jiggle to get them in the right spot. Snug them up just a bit and place the scope inside. Adjust the mounting ring bases, moving them to another RIS slot if needed so the scope is not obstructed. Tighten up the mounting bases. Next, place the top pieces of the mounting rings on over the scope and get the Allen screws started but DO NOT TIGHTEN YET! Make absolutely sure the reticle is lined up so it isn't twisted. If the crosshair is even SLIGHTLY OFF? It can affect your accuracy and also any adjustments made with the knobs on the scope will be ineffective. Once the crosshair is properly aligned? Slowly tighten down the screws. Tighten them all down only a few turns at a time, so as to tighten them all as evenly as possible. Be very careful with these screws! They have very fine threads which make it difficult to align properly. You don't want to force them or strip them!
by Tyler Mathewson Date Added: Wednesday 13 May, 2015
Write Review Back

Result Pages:  1 

Displaying 1 to 1 (of 1 reviews)

2 x FMA Tactical Plastic Case (For pistol, Night Vision, Camera etc.)
1 x Tactical MOLLE Safe Case For Phone&accessories (Multicam)
1 x Tactical MOLLE Safe Case For Phone&accessories (BK)
2 x HRG Sniper Gun Bag/Mat (BK)
1 x HRG Sniper Gun Bag/Mat (Tan)
2 x HRG Tactical Seatback Molle Panel
1 x Wosport Quick Deployment Rifle Bag
1 x Wosport Urban War Rifle Bag
1 x HRG Medium-Sized Portable Pistol Bag (Tan)
1 x WST SL Style Modular Holster Adapter (CB)
1 x Matrix Metal Mesh Balaclava OD
1 x Emersongear Arab kerchief - skeleton (CB)
1 x HRG V Style Scarab Multifunctional Tactical Vest (CB)
1 x Tactical MOLLE Safe Case For Phone&accessories (Multicam Black)
1 x Matrix TTI Pistol Foam Case BK
1 x Tac-Sky RAC Tactical Headset for ARC Rail Helmets DE
1 x Double Bell G Series Competition Upgrade Kit
2 x AIM MP5 Low Mount
1 x M-LOK SCOUT LIGHT PRO M-LOK MOUNT For Surefire Scout Light
2 x FAST Style Micro Mount AP T1/T2 Red Dot Riser BK
1 x HL Style Headset W/ Noise Cancelling/Sound Pickup MC
2 x G Style Super Precision 1.93" Rifle Scope Mount DE
1 x Double Bell M9 Metal Parts Set (KSC spec)
1 x AK Rear Sight Rail Mount
2 x WE-TECH X3400 Airsoft Shooting BB Chronograph (Green)
2 x 45° RMR Mount For Geissel 1.93 Scope Mount
1 x Bell M9 Metal Nozzle
1 x Classic Army Metal Mount Base For M14 Series
1 x EARMOR M13 MTEK M-LOK Helmet Rails Adapter Attachment Kit
2 x EG LEAP Tactical 1.93'' Mount for Aimpont T1/T2
1 x M-LOK & Keymod Offset Picatinny Rail Mount (M300/600 Ready,DE)
1 x Matrix SORDIN Headset For Helmet BK(Basic Ver., FG)
2 x Army Staccato RMR Mounting Plate
1 x Tac-Sky AN/PRC152 Radio Military Harris Case W/ 6 Pins U94 PTT
2 x M16 M4 AR15 Carry Handle 20mm Weaver Rail
2 x AIMO Metal QD 25.4-30mm RDS Mount For AK Series
1 x Earmor M51 PTT (Kenwood 2 Pins)
2 x FAST FTC Style Magnifier Mount For G43 BK
1 x AD M300/600 Offset Mount (M-LOK & Keymod, DE)
1 x Tac-Sky RAC PTT BK (Kenwood 2 Pin)
1 x G style Precision 1.93'' High Mount For MRO Red Dot
2 x Ztactical TEA Style PTT (Motorola Single Pin)
2 x Earmor Headband Cover Multicam (2022 Ver. )
2 x Fast LPVO Mount With RMR/T1/T2 Offset Mount
2 x GG Lerna Style Mount Kit For Eotech
1 x FUSION Style LightWing Adapter-Right BK
1 x EG LEAP Mount For T2/T1/REMO etc
2 x Inline Scout Pro Mount M-LOK & Keymod For M300/600 Series
2 x Earmor M32H MOD4 Headset for FAST Helmets (2022 Ver., GY)
2 x Bell M9 Rubber Parts Set (For KSC M9 Series GBB Pistol)
1 x HL Style Headset W/ Noise Cancelling/Sound Pickup For Helmet FG
2 x Ztactical Combat Series PTT (Motorola Single Pin)
1 x GG Style Forklift Mount Kit T1/T2 BK
1 x G style Precision 1.93'' High Mount For T1/T2 Red Dot
1 x Tac-Sky PRC-148/152/163 Dummy Antenna
1 x Ztactical FBI Style Acoustic Headset (Motorola One Pin)
1 x Adjustable Tactical Light Mount(1'' Diameter)
1 x 5KU AK Scope Mount For T1/T2 Micro Red-dot
1 x EARMOR M12 EXFIL® Helmet Rails Adapter Attachment Kit
2 x Dropwing Adaptive Light Mounts
2 x Armorer Works HX Sight Mount Kit
2 x AD M300/600 Offset Mount (M-LOK & Keymod, BK)
1 x FMA One Oclock Offset Mount (DE)
1 x 5KU Cmore Mount For HiCapa Type 4 SV
1 x 5KU Cmore Mount For HiCapa Type 4 BK
1 x HL Style Headset W/ Noise Cancelling/Sound Pickup FG
1 x Tac-Sky MTEK Helmet Mount For COMTAC BK
2 x 30mm L Mount for Red Dots / Rifle Scopes
1 x Earmor M32 MOD3 Tactical Headset (2022 Ver., CB)
2 x EARMOR M11 ARC Helmet Rails Adapter Attachment Kit
1 x HL Style Headset W/ Noise Cancelling/Sound Pickup PINK
2 x Earmor M32 MOD4 Tactical Headset (2022 Ver., FG)
1 x 5KU Aimpoint Carbon Mount (Bllack, MARUI HI-CAPA)
2 x Double Bell TM M92 Gas Powered Gel Blaster Plastic Parts Set
1 x Ztactical Comtac II
2 x Earmor S03 Silicone Gel Earmuffs Headset Accessories for M31/M32/M31H/M32H Headset
2 x Tac-Sky Team Wendy Helmet Mount For COMTAC BK
1 x Armorer Works IPSC Optics Mount&Speed Cocking Handle(Left&Right)
1 x M10 Style Fission Scope Mounts
1 x FAST LPVO Scope Mount 30mm Scope Rail Mount - BK
1 x Emerson 32X18CM Multi-functional Utility Pouch (BK)
1 x Valken Paintball Universal Tank Vest Pouch BK
1 x Opsmen S18 Tactical Molle Pouch Tan
1 x HRG Drop Pouch/Fanny Pack For AVS JPC CPC (OD)
1 x HRG Foldable Dump Pouch BK
1 x Emersongear 18cm*11cm Pouch (BK)
1 x GP Small Utility Pouch (CB)
1 x GP Small Utility Pouch (BK)
1 x GP Small Utility Pouch (Multicam)
1 x HRG Drop Pouch/Fanny Pack For AVS JPC CPC (BK)
1 x WE TECH TT33 Full Metal GBB Pistol(BK)
1 x WE M712 GBB Pistol W/ Stock (BK, KMT Marking Ver, Limited Set)
1 x WE-TECH F17 V2 GBB Airsoft Pistol BK
1 x S&T Type 64 Scope Mount
1 x Thorntail2 Style Longbar Light Mount For SF M300/M600 Rail Ver.
1 x Cyma AK QD Side Mount
1 x SF RM45 Offset Mount For M300/600 Tac Light DE
1 x ARES Bipod Mount for Keymod
1 x AD Custom P320 RMR/SRO/Doc sight Mount Plate
1 x GG Style Forklift Mount Kit Eotech/Rail DE
1 x G Style Super Precision 1.93" Rifle Scope Mount BK
1 x Tactical Dual Side Scout Mount (M-Lok)
1 x GG Lerna Style Mount Kit for Aim Point BK
1 x SF M300 M600 KeyMod Scout Light Mount
1 x ARES Flashlight / Laser system Mount for Keymod
1 x PTS UNITY TACTICAL FAST FTC OMNI MAG MOUNT
3 x Vector Optics Riser Mount For Frenzy/Docter Sight
1 x AD Custom 2011 Hicapa RMR Mount Base (TM, JAG ARMS, Army etc)
1 x Earmor M32H MOD4 Headset for FAST Helmets (2022 Ver., FG)
2 x HW MRO /W Precision Mount (Perfect edition)
1 x Armorer Works Doc Sight Red dot
1 x M1 Topless Micro SIGHT Red Dot BK
1 x Ztactical U-94 Style PTT (Kenwood 2 Pin)
1 x EG AP Comp M5S 2MOA Red Dot
1 x ACRO P-2 Style Red Dot DE
1 x Blackcat Airsoft Adjustable LED SRO W/ Glock Mount - BK
1 x Multi-Angle Rotation ARC & EXFIL Rail Adapter Suspension for Earmor, Walker, & HL Series Headsets DE
1 x M1 Topless Micro SIGHT Red Dot Red
1 x R5 Style Compact 2 MOA Red Dot
1 x DD Style Fixed Front&Rear sights (Marking edition)
1 x AD Custom Long Eye Relief Second Focal Plane Riflescope TH4-16X44SFIR (Shock-proof)
1 x Dominator™ Tactical Fibre Optic Front-Sight Assembly Red
1 x Matrix QD Sling Swivel Adapter Mount (M-Lok)
1 x Cyma M146 14mmCCW Flash Hider
1 x 5KU JMAC Style RRD-4C Muzzle Brake (14mm CCW, Steel Ver.)
1 x BCM Style Quick Detachable Sling Mount (M-LOK,DE)
1 x SF Style 4 Prong Flash Hider (CCW-14mm, metal)
1 x Cyma M14 Metal Flashhider
1 x CYMA AR15 Flip Up Front/Rear Sight
1 x PTS Enhanced Sling Plate – Modular Gen 2 (ESP-M2) GBBR
1 x CQD Front Attachment Point
1 x SF SOCOM WARCOMP 556 Closed Tine Flash Hider
1 x MP Style Quick Detachable Sling Mount (M-LOK, BK)
1 x ASP Sling Attachment Point (GBBR)
2 x HRG B3 Plus 20W Lipo Battery Smart Charger (2S/3S Lipo/Li-ion)
2 x Matrix CR123A 4pcs Battery Charger
1 x R8T Red Dot Sight (2024 Ver.)
1 x MBUS Front/Rear Flip-up Sights (Gen2, BK)
1 x Modify Modular Gear Set 6mm Ver.2/Ver.3, Top Gear 15.05:1 + Ultr
1 x SHS Nylon Tappet Plate (Version 3)
1 x Modify Cut Off Lever Ver.2 (Steel)
1 x PDI AEG Hopup W Hold Bucking
1 x Modify Modular Gear Set 6mm Ver.2/Ver.3, Speed 16.32:1
1 x Maple Leaf OHM AEG Tensioner Hard
2 x SHS Speed-Up Gear Set for V2/3 AEG GENIII (13:1, CL14006)
$9,110.35
Share Product
 Share via E-Mail  
 Share on Facebook  Share on Twitter