Airsoftdepot Canada

Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
[AO5305-BK]

Price :

$129.95

This is a whole lotta scope! I didn't have the SR-25 or the M24 so I had to put it on my M4A1 ( http://airsoftdepot.ca/catalog/product_info.php?cPath=102_104&products_id=1937 ) instead. I could BARELY get it on there with such a large 50mm/2 inch objective frontal lens on it. Make no mistake! This thing is huge! 14 inches long. It practically dwarfs the M4A1 but since I didn't have anything else to mount it on? I had to try it on SOMETHING. *Make sure to buy the 30mm mounting rings!!! Glad I didn't forget!* Illumination is actually in 3 different colors. Red, green and blue. My eyes are so sensitive to light that I have to leave it off which is actually fine because the reticle is etched in black so don't panic. The adjustable zoom is very nice, the scope adjusts exactly as it should and the 50mm/2inch lens gathers so much light! Very easy to use and comes with the manual. Trades ARE included and thankfully these are mostly on the bottom since they are bright white. A must have for any sniper! To install: (*NEEDS 30mm mount rings SOLD SEPARATELY!!!*) Use the Allen wrench (included with mounting rings) and take apart the mounting rings. Place the bottom pieces onto the rails. This will take a bit of wiggle and jiggle to get them in the right spot. Snug them up just a bit and place the scope inside. Adjust the mounting ring bases, moving them to another RIS slot if needed so the scope is not obstructed. Tighten up the mounting bases. Next, place the top pieces of the mounting rings on over the scope and get the Allen screws started but DO NOT TIGHTEN YET! Make absolutely sure the reticle is lined up so it isn't twisted. If the crosshair is even SLIGHTLY OFF? It can affect your accuracy and also any adjustments made with the knobs on the scope will be ineffective. Once the crosshair is properly aligned? Slowly tighten down the screws. Tighten them all down only a few turns at a time, so as to tighten them all as evenly as possible. Be very careful with these screws! They have very fine threads which make it difficult to align properly. You don't want to force them or strip them!

by Tyler Mathewson Date Added: Wednesday 13 May, 2015

Write Review Back

Result Pages: 1

Displaying 1 to 1 (of 1 reviews)

Shopping Cart

1 x	CD LCS MK1 M-LOK Switch Mount
1 x	ET OGL Aiming Device（Red&IR Laser&LED）（Aluminum, BK）
1 x	WE-TECH X3400 Airsoft Shooting BB Chronograph (Green)
1 x	Wire Guide System (M-LOK & Keymod, DE, MA Type)
1 x	Tactical Mini ModButton Pressure Remote Switch BK (3.5mm plug)
1 x	FAST Style Micro Mount AP T1/T2 Red Dot Riser DE
1 x	FAST FTC Style Magnifier Mount For G43 BK
1 x	GG Style Forklift Mount Kit T1/T2 DE
1 x	5KU AK Scope Mount For T1/T2 Micro Red-dot
1 x	Tactical UT Hot Button Remote Switch MLOK&Keymod, 2.5mm plug, BK
1 x	FMA Modlite ModButton Lite (2.5mm Plug, DE)
1 x	FUSION Style LightWing Adapter-Right BK
1 x	FMA One Oclock Offset Mount (DE)
1 x	GG Style Forklift Mount Kit T1/T2 BK
1 x	Classic Army Metal Mount Base For M14 Series (works with Cyma after modifying)
1 x	ACM L3 NGAL Red Laser W/LED Flashlight (Aluminun Version, BK)
1 x	G style Precision 1.93'' High Mount For MRO Red Dot
1 x	ACM L3 NGAL Red Laser W/LED Flashlight (Aluminun Version, DE)
1 x	5KU Cmore Mount For HiCapa Type 4 SV
1 x	ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (DE)
1 x	FMA Remote Pressure Switch for Laser Devices (Style: Crane Plug / Black)
1 x	Tactical UT Hot Button Remote Switch MLOK&Keymod, 3.5mm plug, BK
1 x	HRS PEQ-15 Class I IR Laser Aiming Device (DE)
1 x	EG LEAP Mount For T2/T1/REMO etc
1 x	5KU Cmore Mount For HiCapa Type 4 BK
1 x	ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (BK)
1 x	Wire Guide System (M-LOK & Keymod, BK, MA Type)
1 x	HRS PEQ-15 Class I IR Laser Aiming Device (BK)
2 x	AK Rear Sight Rail Mount
1 x	AD M300/600 Offset Mount (M-LOK & Keymod, BK)
1 x	JUNK Well M11 Gas Magazine (32 Rounds)
1 x	Night-Evolution Low Drag Mount for T1 and T2 (AO1780)
1 x	MK18 Comp M2 Mount For Aimpoint M2/M3
1 x	GG Lerna Style Mount Kit For Eotech
1 x	Tactical UT Hot Button Remote Switch (Picatinay, 3.5mm plug, BK)
1 x	Offset Mount for M600C/M300A
1 x	45° RMR Mount For Geissel 1.93 Scope Mount
1 x	UT AX Button Switch For Aiming Device (BK, 2.5mm Plug)
2 x	Armorer Works HX Sight Mount Kit
1 x	30mm L Mount for Red Dots / Rifle Scopes
1 x	M16 M4 AR15 Carry Handle 20mm Weaver Rail
1 x	WADSN MAWL-C1 Red laser/IR Laser/LED Light/IR Light (BK)
1 x	FMA LAB PEQ-NGAL LED Light + IR Red Laser BK
1 x	Double Bell G Series Competition Upgrade Kit
1 x	Raid X Style Red/IR Laser Aiming Device DE
1 x	Tactical Mini ModButton Pressure Remote Switch BK (2.5mm plug)
1 x	UT AX Button Switch For Aiming Device (BK, 3.5mm Plug)
1 x	UT AX Button Dual Switch For Aiming Device (BK,SF&3.5mm Plug)
1 x	Cyma AK QD Side Mount
1 x	Tactical Mini ModButton Pressure Remote Switch DE (2.5mm plug)
1 x	FUSION Style ModButton Swtch&Mount For M300,M600 BK (2.5mm)
1 x	Army Staccato RMR Mounting Plate
1 x	FAST Style Tactical Riser Rail Mount BK
1 x	M-LOK & Keymod Offset Picatinny Rail Mount (M300/600 Ready,DE)
1 x	FAST Style Micro Mount AP T1/T2 Red Dot Riser BK
1 x	M-LOK SCOUT LIGHT PRO M-LOK MOUNT For Surefire Scout Light
1 x	UT AX Button Switch For Aiming Device (DE, 2.5mm Plug)
1 x	Picatinny WireGuide System Cable Management Clip
1 x	Adjustable Tactical Light Mount(1'' Diameter)
1 x	AIMO Metal QD 25.4-30mm RDS Mount For AK Series
2 x	MI AK Tactical Railed Scope Mount (BK)
1 x	AD M300/600 Offset Mount (M-LOK & Keymod, DE)
1 x	FMA LAB PEQ-NGAL LED Light + IR Red Laser DE
1 x	Tactical UT Hot Button Remote Switch (Picatinay, 2.5mm plug, BK)
1 x	GG Style Forklift Mount Kit Eotech/Rail DE
1 x	FAST LPVO Scope Mount 30mm Scope Rail Mount - BK
1 x	M10 Style Fission Scope Mounts
1 x	AIM MP5 Low Mount
1 x	5KU Aimpoint Carbon Mount (Bllack, MARUI HI-CAPA)
1 x	AD Custom 2011 Hicapa RMR Mount Base (TM, JAG ARMS, Army etc)
1 x	Bell G17 Slide (Full marking, BK)
1 x	HRG Tactical Molle Combat Belt (Gen2, Multicam)
1 x	A&K PKM Wood Kit
1 x	Matrix CNC Aluminum Extended Magazine Release for Glock BK
1 x	GunsModify 125% SS Recoil Spring Guide Set- G17/G18C BK
1 x	A&K M1892 OEM Rebuild Kit
1 x	CowCow AAP-01 Enhanced Complete Nozzle Set
1 x	E&C Trigger Unit for G-Series GBB Pistol
1 x	E&C G Series Slide Lock Spring
1 x	WE G-Series/Hicapa Gas Magazine Fill Valve
1 x	E&C G17 Slide (Full metal, engraved marking）
1 x	Army Armament AUG Carbine AEG W/ 1.5X Scope (OD)
2 x	Army Armament AUG Para AEG W/ 1.5X Scope (OD)
1 x	High Speed 9mm Soft Shell Pistol Mag MOLLE/Belt Pouch - BK/Red
1 x	Amomax Universal Double Magazine Pouch BK
1 x	FMA XD GEAR Magazine Pouch for XDM (Belt type) BK
1 x	Canada (Small, Green)
1 x	Double Bell G36C Airsoft AEG Rifle
1 x	Armorer Works HX Competition magazine Release Button - Silver
1 x	Armorer Works .38 SUPERCOMP Race Pistol (HX2401)
1 x	AW VX 7 / 9 (Optics Ready ver) Gas Magazine Rubber Gas Route
1 x	Armorer Works Adaptive Drum Magazine - HX Series BK
1 x	Armorer Works 5.1 CO2 Magazine (BK, 30 rounds, TM/WE compatible)
1 x	Armorer Works Competition Grade HI-Speed 5.1 GBB(AW-HX2702)
1 x	Armorer Works 1911 Single Stack Magazine (BK)
1 x	Armorer Works VX8100 Semi/Full Auto GBB(AW-VX8100)
1 x	Armorer Works HX Thumb Safety (Left & Right) Tan
1 x	Armorer Works HX Magazine Release Button - Black
1 x	Armorer Works VX9/Glock Series (Standard Slide Ver. ) Magazine
1 x	Armorer Works 1911 Single Magazine For NE10 Series
1 x	Armorer Works 5.1 Gas Magazine (SV, 30 rounds, TM/WE compatible)
1 x	EMG Noveske N4 (T8/ MWS System) GBB Airsoft Rifle (BK)
1 x	CYMA M870 30 RDs Shells (6 pcs pack, Tokyo Marui Compatible) Red
1 x	Cyma Ak Airsoft Rear Single Point Ambidextrous Sling Plate
1 x	CYMA AK Contractor C107 Lower CNC Aluminum Airsoft Rail System
1 x	Cybergun Colt (T8/ MWS System) MK18 MOD1 GBB Airsoft Rifle
1 x	CYMA CNC Aluminum Power Up Kit For M24/M705 Sniper Rifle
1 x	Cyma MP5 SD6 AEG
1 x	CYMA Adjustable Full Size M16 Precision Rifle Stock
1 x	CYMA AK-74 Metal Mid-Cap Magazine (150 rds)
1 x	CYMA M14 Socom Front Set
1 x	Cyma M14 Metal Flashhider
1 x	Cyma CM077 AK Pistol Grip (BK)
1 x	Cyma MP Style Conversion Kit (077A, For Cyma AK74 Series)
1 x	Bipod Grip
1 x	Umarex PPQ Magazine
1 x	EMG/ARCHON Type B Gas Magazine

$9,423.08