CALL US :416-298-3303
Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)

Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
[AO5305-BK]

Price :
$129.95
5 of 5 Stars!
This is a whole lotta scope! I didn't have the SR-25 or the M24 so I had to put it on my M4A1 ( http://airsoftdepot.ca/catalog/product_info.php?cPath=102_104&products_id=1937 ) instead. I could BARELY get it on there with such a large 50mm/2 inch objective frontal lens on it. Make no mistake! This thing is huge! 14 inches long. It practically dwarfs the M4A1 but since I didn't have anything else to mount it on? I had to try it on SOMETHING. *Make sure to buy the 30mm mounting rings!!! Glad I didn't forget!* Illumination is actually in 3 different colors. Red, green and blue. My eyes are so sensitive to light that I have to leave it off which is actually fine because the reticle is etched in black so don't panic. The adjustable zoom is very nice, the scope adjusts exactly as it should and the 50mm/2inch lens gathers so much light! Very easy to use and comes with the manual. Trades ARE included and thankfully these are mostly on the bottom since they are bright white. A must have for any sniper! To install: (*NEEDS 30mm mount rings SOLD SEPARATELY!!!*) Use the Allen wrench (included with mounting rings) and take apart the mounting rings. Place the bottom pieces onto the rails. This will take a bit of wiggle and jiggle to get them in the right spot. Snug them up just a bit and place the scope inside. Adjust the mounting ring bases, moving them to another RIS slot if needed so the scope is not obstructed. Tighten up the mounting bases. Next, place the top pieces of the mounting rings on over the scope and get the Allen screws started but DO NOT TIGHTEN YET! Make absolutely sure the reticle is lined up so it isn't twisted. If the crosshair is even SLIGHTLY OFF? It can affect your accuracy and also any adjustments made with the knobs on the scope will be ineffective. Once the crosshair is properly aligned? Slowly tighten down the screws. Tighten them all down only a few turns at a time, so as to tighten them all as evenly as possible. Be very careful with these screws! They have very fine threads which make it difficult to align properly. You don't want to force them or strip them!
by Tyler Mathewson Date Added: Wednesday 13 May, 2015
Write Review Back

Result Pages:  1 

Displaying 1 to 1 (of 1 reviews)

1 x Fast LPVO Mount With RMR/T1/T2 Offset Mount
1 x AIMO Metal QD 25.4-30mm RDS Mount For AK Series
1 x AD Custom 2011 Hicapa RMR Mount Base (TM, JAG ARMS, Army etc)
1 x GG Style Forklift Mount Kit Eotech/Rail DE
1 x M84 Flashbang Grenade Dummy/Light
1 x GG Style Forklift Mount Kit T1/T2 BK
1 x AK Rear Sight Rail Mount
1 x FMA One Oclock Offset Mount (DE)
1 x FAST Style Micro Mount AP T1/T2 Red Dot Riser BK
1 x Sig Sauer P320 ASP, .177 Caliber, BK
1 x Canada (Small, Green)
1 x Canada (Small, Black)
1 x USAF
2 x SHS CNC Aluminum Ball Bearing Piston Head
2 x One-way Bearing Piston Head, Recoil Shock System M4 Series (TM Gas Cylinder)
2 x SHS Full Steel 15 Teeth Pion piston
1 x VFC High Speed AEG Piston (Metal Teeth)
2 x SHS Full Steel 19 teeth Piston (For SR-25, L85)
1 x JG Bore Up Piston Head
2 x SHS POM Bore Up Silent Piston Head
1 x WiiTech One-way Bearing Piston Head (for Wii Tech gas cylinder)
1 x E&C Thrust Bearing Polymer Piston Head
2 x SHS Full Steel 15 Teeth Pion piston (Light Weight Version)
2 x SHS Full Steel 14 Teeth Piston
1 x E&C Ver. 2 Cylinder Complete Upgrade Set
1 x CYMA AR15 Flip Up Front/Rear Sight
2 x Cytac/Amomax Molle Adapter (Holster/Mag)
2 x BCM Gunfighter KAG (M-LOK, BK)
1 x Cyma MP Style Conversion Kit (077A, For Cyma AK74 Series)
2 x VSG-S Grip For Rail (FG)
1 x Steel QD Swivel (A)
1 x CYMA Steel Shturm 14mm CCW Flash Hider
1 x Amomax Heavy Duty Single Point Sling Padded With Mash Hook
1 x Matrix QD Sling Swivel Adapter Mount (M-Lok)
1 x MOE Style Polymer Rails (BK)
1 x S&T Type 64 Handguard Rail
1 x BFG Universal ULoop Quick-detach Sling Buckle
2 x BCM Gunfighter KAG 1913 (Rail, DE)
1 x M. Receiver Rail for T.Marui M870 Tactical Shotgun
1 x S&T Kar98k Spring Airsoft Sniper Rifle (Wood Ver.)
1 x Zenitco Style PK-6 Vertical Grip (Metal, Markings)
1 x PTS Griffin Armament Taper Mount Minimalist Stealth Flash Suppressor (14mm CCW)
1 x EMERSON Multi-Purpose L.Q.E QD Hanging Buckle (CB)
1 x Speed Bungee Single Point Sling (DE)
1 x RVG Grip (DE)
2 x IMP M-LOK & Keymod Barrier Hand Stop DE
1 x WST 6354 DO Holster For Glock 17/19 with X300/X300U (RG)
2 x 5KU JMAC Style HRD MLOK Handstop
1 x A&K STW Upper Metal Receiver (Systema PTW Compatible)
1 x B5 Style Handstop Standard (M-LOK, DE)
1 x AMOMAX Fabric Universal Holster
1 x Evolution Aluminum Vertical Grip (Long, Keymod)
1 x Devgru Tacitcal Two Point Sling (BK)
1 x PPS Fastigiate M4/M870 Stock Adaptor
1 x PTS Dead Air Sandman-L Tracer Unit BK
1 x HRG B3 Plus 20W Lipo Battery Smart Charger (2S/3S Lipo/Li-ion)
2 x B5 Style Handstop Standard (M-LOK, Red)
1 x Eshooter Flare M Tracer Unit ( Rainbow color, RGB color )
2 x BCM Gunfighter KAG (M-LOK, DE)
1 x PTS Enhanced Sling Plate – Modular Gen 2 (ESP-M2) GBBR
1 x AS Handstop (M-LOK/Keymod, BK)
2 x Amomax Tactical Holster For G19 (Gen2)
1 x WST 3.5 inch 14mm CCW Flash Tracer Surpressor BK
1 x 15cm Rail (bk)
1 x Matrix SFL Kydex Tactical Holster for G Series with TLR-1 Flashlight
2 x RVG Grip (Foliage Green)
1 x MS3 Sling (BK)
1 x Matrix SFL Kydex Tactical Holster for G Series with X300/X300V Flashlight
1 x PTS Dead Air Sandman-K Tracer Unit DE
1 x Bipod Grip
1 x MP Style M-LOK Hand Stop Kit BK
2 x E&C SI GRIDLOK 8.5'' PDW(AD Custom Marking Ver. )
1 x TMC HM Flash Light Bearing Concealment Holster M17/P320 (BK)
1 x Amomax Two Point Sling Padded With HK Style Clip
2 x BCM Gunfighter KAG 1913 (Rail, BK)
1 x AFG 2 Grip (BLACK)
1 x Surefire CR123A 3V Battery
2 x 16340 CR123A Rechargeable Battery (3.7V, 750MAH)
1 x AFG 2 Grip (TAN)
1 x Double Bell VSR-10 Bipod Rail
1 x CQD Front Attachment Point
1 x Devgru Tacitcal Two Point Sling (RG)
1 x Eshooter Flare M BT Tracer/chrnograph Unit (RGB Rainbow color, Bluetooth Ver.)
1 x Amomax Tactical Holster For M9/M92 Series
1 x AD Custom M-LOK 5 slots rail
1 x VSG-S Grip For Rail (BK)
1 x LINK Angled HandStop W/ Cable Management (M-LOK/Keymod, DE)
2 x Skull Magwell For M4 AEG
1 x Opsmen Tactical Lanyard (BK)
1 x EMERSON Multi-Purpose L.Q.E QD Hanging Buckle (BK)
1 x EMERSON Multi-Purpose L.Q.E QD Hanging Buckle (FG)
1 x WST 6354 DO Holster For Glock 17/19 with X300/X300U (Multicam)
1 x BFG Style Belt Fed Loop Quick-detach Sling Buckle (High Grade Ver.)
1 x Blackcat Aluminum LED RMR "REV 2" w/ G Series Mount - BK
1 x Hugger Polycarbonate Lens Protector (MRO, 38mm)
1 x M1 Topless Micro SIGHT Red Dot Red
1 x R5 Style Compact 2 MOA Red Dot
1 x M3 screws x2 for RMR/SRO/Doc installation on Army Armament pistols
1 x AD Custom Polycarbonate Lens Protector (Eotech)
1 x R8T Red Dot Sight (2024 Ver.)
1 x AD Custom Polycarbonate Lens Protector (Dia. 30mm, TLR1/T-Eagle)
1 x Flip Lens Protector
1 x M1 Topless Micro SIGHT Red Dot BK
1 x ACM TA-11 3.5X Optical Fiber Scope with RMR Sight (Perfect ver.)
1 x AP 3XMAG-1 3X Mag Magnifier Scope With Fast Mount
1 x Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
1 x AD Custom Long Eye Relief Second Focal Plane Riflescope TH4-16X44SFIR (Shock-proof)
1 x Elcan Style Combat Scope 3x
1 x T-Eagle Tactical Riflescope EO1-5X24 IR W/ Mount
1 x ACM 3-9x40 Riflescope With Mount Rings
1 x VFC MP7 AEG Original Piston/Piston Head Set
1 x The Knight tactical Face Mask (Gray)
1 x TMC MANDIBLE For OC Highcut Helmet - Coyote Brown
1 x E&C KAC Style M110 AEG (Perfect edition)
1 x E&C M653 (AD Custom, Marking Ver.)
1 x The Knight tactical Face Mask (OD)
1 x Matrix Tactical Dual Respirator Half Mask
1 x Matrix Iron Face Padded Lower Half Face Mask W/ Ear Cover(Color:BK)
1 x Matrix Tactical SF Respirator Half Mask (Functional)
1 x Matrix Tactical SF Respirator Half Mask (Functional W/ Microphone)
1 x E&C URG-I MK4 M-LOK 9.5''M4 AEG BK (AD Custom Marking Ver.)
1 x E&C URG-I SMR MK8 13.5'' AEG (AD Custom Marking Edition)
1 x E&C ODIN Style 9.5'' AEG (AD Custom Ver.)
1 x Valken Zulu Airsoft Mesh Mask
1 x Ghost Recon style Mesh Face Mask
1 x Opsmen S18 Tactical Molle Pouch BK
1 x Matrix SFL 6004 Molle Adaptor
1 x HRG Drop Pouch/Fanny Pack For AVS JPC CPC (Multicam)
1 x Mini Handstop (M-LOK, BK)
1 x TMC 5X79 Compact Holster (Multicam)
1 x Emersongear 17cm*17cm Rescue Pouch (Multicam Black)
1 x B5 Style Handstop Standard (M-LOK, BK)
1 x TMC HM Flash Light Bearing Concealment Holster 1911 (BK)
1 x HM Brace Glock Kit Holster
1 x Valken Paintball Universal Tank Vest Pouch BK
1 x WST SL Style Modular Holster Adapter (CB)
1 x Cytac/Amomax Holster For Sig M17/P320
1 x SF Style Rapid Deploy Holster For Pistol /W XH15/XH35/X300UH-B
1 x GP Small Utility Pouch (Multicam)
1 x Matrix SFL Belt Holster Drop Adapter (BK)
1 x Keymod System GolfBall Pattern Short Grip (Silver)
1 x Matrix CR123A 4pcs Battery Charger
1 x Zenitco Style PK-6 Vertical Grip (Nylon Ver.)
1 x VSG-S Grip For Rail (DE)
1 x HRG Drop Pouch/Fanny Pack For AVS JPC CPC (Multicam Black)
1 x AS Handstop (M-LOK/Keymod, DE)
1 x Emerson 32X18CM Multi-functional Utility Pouch (BK)
1 x Matrix Hard Knuckle Gloves (Sage, Small)
1 x Amomax Airsoft BB Portable Storage Pouch (3000 rds capacity)
1 x Matrix SFL Kydex Quickdraw Holster (X300 Flashlight)
1 x AVG Style Handstop W/ Cable Management (M-LOK/ Keymod, BK)
1 x HRG Drop Pouch/Fanny Pack For AVS JPC CPC (OD)
1 x Pilot Face Mask w/ Steel Mesh Lower Face Protection Multicam
1 x 5KU Serrated Scale Style Hand Stop (Keymod/ MLOK)
1 x VSG-S Grip For M-LOK/ Keymod BK
1 x HRG Drop Pouch/Fanny Pack For AVS JPC CPC (BK)
$10,218.63
Share Product
 Share via E-Mail  
 Share on Facebook  Share on Twitter