Airsoftdepot Canada

Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
[AO5305-BK]

Price :

$129.95

This is a whole lotta scope! I didn't have the SR-25 or the M24 so I had to put it on my M4A1 ( http://airsoftdepot.ca/catalog/product_info.php?cPath=102_104&products_id=1937 ) instead. I could BARELY get it on there with such a large 50mm/2 inch objective frontal lens on it. Make no mistake! This thing is huge! 14 inches long. It practically dwarfs the M4A1 but since I didn't have anything else to mount it on? I had to try it on SOMETHING. *Make sure to buy the 30mm mounting rings!!! Glad I didn't forget!* Illumination is actually in 3 different colors. Red, green and blue. My eyes are so sensitive to light that I have to leave it off which is actually fine because the reticle is etched in black so don't panic. The adjustable zoom is very nice, the scope adjusts exactly as it should and the 50mm/2inch lens gathers so much light! Very easy to use and comes with the manual. Trades ARE included and thankfully these are mostly on the bottom since they are bright white. A must have for any sniper! To install: (*NEEDS 30mm mount rings SOLD SEPARATELY!!!*) Use the Allen wrench (included with mounting rings) and take apart the mounting rings. Place the bottom pieces onto the rails. This will take a bit of wiggle and jiggle to get them in the right spot. Snug them up just a bit and place the scope inside. Adjust the mounting ring bases, moving them to another RIS slot if needed so the scope is not obstructed. Tighten up the mounting bases. Next, place the top pieces of the mounting rings on over the scope and get the Allen screws started but DO NOT TIGHTEN YET! Make absolutely sure the reticle is lined up so it isn't twisted. If the crosshair is even SLIGHTLY OFF? It can affect your accuracy and also any adjustments made with the knobs on the scope will be ineffective. Once the crosshair is properly aligned? Slowly tighten down the screws. Tighten them all down only a few turns at a time, so as to tighten them all as evenly as possible. Be very careful with these screws! They have very fine threads which make it difficult to align properly. You don't want to force them or strip them!

by Tyler Mathewson Date Added: Wednesday 13 May, 2015

Write Review Back

Result Pages: 1

Displaying 1 to 1 (of 1 reviews)

Shopping Cart

1 x	UT AX Button Switch For Aiming Device (BK, 3.5mm Plug)
1 x	FYT B-1121RZ Steel Target
2 x	ET OGL Aiming Device（Red&IR Laser&LED）（Aluminum, BK）
1 x	UT AX Button Dual Switch For Aiming Device (BK,SF&3.5mm Plug)
1 x	Airsoft Cardboard Target Paper (12pcs)
1 x	FMA LAB PEQ-NGAL LED Light + IR Red Laser BK
1 x	HRS PEQ-15 Class I IR Laser Aiming Device (BK)
1 x	EMERSON Aluminum Shooting Target -12 inches
1 x	Raid X Style Red/IR Laser Aiming Device DE
1 x	Sotac Remote Dual Pressure Switch Augmented Pressure Double (SF&Crane plug)
1 x	Tactical UT Hot Button Remote Switch MLOK&Keymod, 2.5mm plug, BK
1 x	TMC STAGE Airsoft Training System Target Set (1 Host + 2 Slave)
1 x	Laser Bore Sight Collimator
1 x	Element Motor Gear Tool (Install & Remove)
2 x	ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (BK)
1 x	Tactical Mini ModButton Pressure Remote Switch DE (2.5mm plug)
1 x	UT AX Button Switch For Aiming Device (BK, 2.5mm Plug)
2 x	ET OGL Aiming Device（Red&IR Laser&LED）（Aluminum, DE）
1 x	HRS PEQ-15 Class I IR Laser Aiming Device (DE)
1 x	WST The Texas Star Target For Airsoft
1 x	FMA Modlite ModButton Lite (2.5mm Plug, DE)
1 x	Tactical UT Hot Button Remote Switch (Picatinay, 2.5mm plug, BK)
1 x	FMA LAB PEQ-NGAL LED Light + IR Red Laser DE
1 x	Tactical UT Hot Button Remote Switch (Picatinay, 3.5mm plug, BK)
1 x	Compact Model Tool Kit
1 x	Tactical Mini ModButton Pressure Remote Switch BK (3.5mm plug)
2 x	ACM L3 NGAL Red Laser W/LED Flashlight (Aluminun Version, DE)
1 x	UT AX Button Switch For Aiming Device (DE, 2.5mm Plug)
1 x	Element Valve Key BK
1 x	Airsoft Target (2 Cardboard Target included)
2 x	Picatinny WireGuide System Cable Management Clip
1 x	Matrix Steel AR15 Wrench
1 x	PPS M870 Steel Right/Left Fork
1 x	RA-Tech Precision inner barrel 6.01 (WE Open Bolt system, 225mm)
1 x	G&P WA Reinforce Spring
1 x	RA Steel CNC Trigger Set (for WE SCAR)
2 x	Double Bell Bolt Set for 98K Shell Ejecting Rifle (Spring Ver.)
1 x	RA steel CNC trigger assembly (FOR WE SCARH)
1 x	Valken Tactical Thunder V Fire Lever
1 x	CNC Steel Sear( For WA )
1 x	RA steel CNC firing pin base (FOR WE SCAR H)
1 x	SF M300/600 Series Tail Button Switch
1 x	SF X300 LED Flashlight (300 lumens, BK, Perfect Edition)
1 x	ASG Gear Grease
1 x	SF M600C Mini Scout Light W/ Modbutton Switch (DE, 340 Lumens)
1 x	SF M300B LED Tac Light(Dual Function Tape Switch,240 Lumens, BK)
1 x	ML PLHv2-PDW350 Light BK
1 x	CQB Russian HPA Valve For TM GBB Pistol & Rifle
1 x	ASG UltraAir Silicone Oil Spray (60ml)
1 x	Valken Tank Kits/Parts - SLP QD Air Rig 42 Hose Only
1 x	Night Evolution Tail Pressure Switch for WMX200
1 x	Navy Seal VIP IR LED Light (Functional Ver., BK)
1 x	PVS-14 Weapon Mount QuickConnect Rail Mount Adapter
1 x	SF M640DF LED Scout Light (1000 Lumens, BK)
1 x	SF M600DF LED Scout Light (1400 Lumens, DE)
1 x	JUNK Well M11 Gas Magazine (32 Rounds)
2 x	FUSION Style ModButton Swtch&Mount For M300,M600 BK (2.5mm)
1 x	SF Style Scout Light Rear Cap for M300&M60
1 x	Mad Hatter Classic Hat Red
1 x	MHI Dad Hat BK
1 x	RA Adaptor for WE M4 GBB
1 x	GHK M4 Standard Muzzle Velocity Nozzle
1 x	Steel Valve Lock For WA M4
1 x	WiiTech Enhanced Loading Nozzle Assembly for WA
1 x	PPS M870 Magazine Tube Fixed Bar
1 x	M84 Flashbang Grenade Dummy/Light
1 x	ASP Sling Attachment Point (GBBR)
1 x	G&P WA Bolt Buffer
1 x	GHK M4 Low Muzzle Velocity Nozzle
1 x	CD Optimized Weapon Light (1500 Lumens,DE)
1 x	CD Optimized Weapon Light (1500 Lumens,BK)
1 x	Night Evolution Dual Function Tape Switch (NE 07010)
1 x	SF M640B LED Scout Light Picatiny/M-LOK Pkg (BK, 560 Lumens)
1 x	Wolverine Airsoft 18 Wire Harness (Gen. 2)
1 x	KIJI Style K-10 Infraed Illumination Flashlight (W/ 20mm Mount, BK)
1 x	FUSION Style ModButton Swtch&Mount For M300,M600 DE (3.5mm)
1 x	HEL STAR 6 Gen 3 LED Helmet Light/Marker (DE, Red)
1 x	SF M720V LED Tactical Flashlight (BK, 270 Lumens)
1 x	SF M600W Scout Light (Strobe Output Ver.)
1 x	ML PL350-PLHv2 Light DE
1 x	AD GBB/Propane Tank Silicone Oil (1.5WT, 30ml)
1 x	SF M600C Mini Scout Light W/ Modbutton Switch (BK, 340 Lumens)
1 x	Dominator™ 62/3000 HPA Aluminium Tank
1 x	CD R-Style Standard Flashlight BK
1 x	Night Evolution Remote Dual Switch (1 Plug, NE07014-BK)
1 x	KIJI Style K-10 Infraed Illumination Flashlight (W/ 20mm Mount, DE)
1 x	WE-TECH X3400 Airsoft Shooting BB Chronograph (Green)
1 x	FUSION Style ModButton Swtch&Mount For M300,M600 BK (3.5mm)
1 x	CD R-Style Micro Flashlight BK
1 x	Valken Paintball/ HPA Universal Tank Vest Pouch BK
1 x	Dominator™ 68/4500 HPA Carbon Tank
1 x	Manta Strobe (DE,Red)
1 x	SF M600C Scout Light With SL07 Scout Dual Switch ( IR Only, 850nm)
1 x	Night Evolution Tactical Augmented Pressure Switch(2x3.5mm,BK)
1 x	ML PL350-PLHv2 Light BK
1 x	ED Wire Guide Clip (M-LOK&Keymod, DE)
1 x	ED Wire Guide Clip (M-LOK&Keymod, BK)
1 x	Night Evolution HELMET LIGHT SET GEN 3 (BK)
1 x	ML PLHv2-PDW350 Light DE
1 x	Helmet V-Lite Marker (DE, Red)
1 x	CD R-Style Micro Flashlight DE
1 x	SF X400 Tactical LED Pistol Light w/ Red Laser DE
1 x	Dual Dovetail Adapter Replaces J-Arm For PVS-14 (Aluminun)
1 x	FUSION Style ModButton Switch&Mount For M300,M600 BK(Flashlight)
1 x	SF M600DF LED Scout Light (1400 Lumens, BK)
1 x	Wire Guide System (M-LOK & Keymod, BK, MA Type)
1 x	Raid X Style Red/IR Laser Aiming Device BK
1 x	WADSN MAWL-C1 Red laser/IR Laser/LED Light/IR Light (BK)
1 x	FMA Remote Pressure Switch for Laser Devices (Style: Crane Plug / Black)
1 x	Tactical Mini ModButton Pressure Remote Switch BK (2.5mm plug)
1 x	ACM L3 NGAL Red Laser W/LED Flashlight (Aluminun Version, BK)
1 x	Mad Hatter Classic Hat BK
1 x	Legion Baseball Cap (BK, Gold)
1 x	ASG Storm Apocalypse Grenade (BK)
1 x	MOE Illumination Kit (BK)
1 x	AD GBBR/Grenade Silicone Oil (30WT, 15ml)
1 x	Dominator™ SLP QD 36'' Braided Hose
1 x	SF M340B LED Scout Light Picatiny/M-LOK Pkg (BK, 500 Lumens)
1 x	AD M300/600 Offset Mount (M-LOK & Keymod, DE)
1 x	MI AK Tactical Railed Scope Mount (BK)
1 x	AIM MP5 Low Mount
1 x	GG Style Forklift Mount Kit T1/T2 DE
1 x	5KU Aimpoint Carbon Mount (Bllack, MARUI HI-CAPA)
1 x	AD Custom P320 RMR/SRO/Doc sight Mount Plate
1 x	EG LEAP Mount For T2/T1/REMO etc
1 x	Armorer Works HX Sight Mount Kit
2 x	ARES Bipod Mount for Keymod
1 x	EG LEAP Tactical 1.93'' Mount for Aimpont T1/T2
1 x	Army Armament Staccato DVC P GBB Airsoft Pistol (RMR ready, BK)
2 x	Tactical Hanger (2nd Gen)
1 x	FMA 3 type for 25mm Webbing (BK)
1 x	Aqualung Survival Egress Air MKII Dummy
1 x	HRG Laser-cut MOLLE Drop Leg/Shoulder Pad Platform (Tan)
1 x	S&T Spare Magazine for Kar98K/M1903A1 Spring Rifle (25 rds)
1 x	WELL MB01/04/05/08 Magazine
1 x	A&K M24 Magazine (15 rds)
1 x	Snow Wolf VSR-10 Magazine (Compatible with Double Bell)
1 x	Classic Army M24 25rds Magazine
1 x	E&C L96 Magazine
1 x	SHS Ver2 High Torque Motor
1 x	Armorer Works VX9/Glock Series (Standard Slide Ver. ) Magazine
1 x	Armorer Works G Series Magazine (BK, 25 rounds, TM/WE compatibl
2 x	Double Bell G19 Green Gas Magazine (2019 Ver.)
1 x	Armorer Works VX7/Glock Series (Standard Slide Ver. ) Magazine
2 x	Motor Pinion Gear (O Shape)
2 x	Motor Screw Set (4pcs)
2 x	Double Bell SCAR-H 90rds Mid-cap Magazine DE
2 x	WE High Power Browning Magazine (20 Rds)
1 x	EMG / SALIENT ARMS INTERNATIONAL™ BLU GAS STANDARD MAGAZINE
1 x	WE P38 14rds Green Gas Magazine
1 x	A&K/E&C M110 360 rds hicap magazine
1 x	A&K STW Motor for Systema PTW type M4 Series Airsoft AEG
1 x	SHS Cut Off Lever Ver.3 (Steel)
1 x	Gate TITAN AEG Mosfet System DROP-in MODULE Rear Wired V2 Basic
1 x	SHS SR-25 Nozzle (24mm)
1 x	SHS Cylinder For Gearbox 300-400mm (QG0008)
2 x	E&C Ver. 2 Cylinder Complete Upgrade Set
2 x	VFC AEG M4 Nozzle (Polymer)
1 x	SHS Cylinder For Gearbox 400-455mm (QG0005)
1 x	A&K Masada Hopup
1 x	SHS 7075 CNC Aluminium Silent Cylinder Head for AK AEG (Ver3)
1 x	SHS Aluminium Ball Bearing Spring Guide Ver.3 WD0011
1 x	A&K STW/PTW M90 Complete Cylinder (300~320 FPS, Stainless Steel)
1 x	SHS 7075 CNC Aluminium Silent Cylinder Head for G36 AEG
1 x	SHS Aluminium Ball Bearing Spring Guide Ver.2 WD0010
1 x	Modify Air Seal Nozzle for Classic Army/ ECHO1 SCAR Series
1 x	Modify Modular Gear Set 6mm Ver.2/Ver.3, Speed 16.32:1
1 x	SHS Cylinder Set (For AK and M4 Series AEG)
1 x	A&K STW/PTW M110 Complete Cylinder (400 FPS, Stainless Steel)
1 x	HRG Tactical Seatback Molle Panel
1 x	Emersongear Pmac Magzine Style Powerbank Case (DE)
1 x	Modular Military Vest SRB Side Release Buckle (2pcs, BK)
1 x	FMA 3 type for 25mm Webbing (DE)
1 x	Double Bell Winchester M1894 Lever Action CO2 Airsoft Rifle (Real wood)
1 x	Tienly Infinity GT-35000 Motor Long Type
2 x	AD Custom Bravo M4 10'' M-LOK AEG (Metal-finishing Polymer Body, QD Gearbox, BK)
2 x	Double Bell CAR-15 N23 PDW M4 Airsoft AEG Rifle
1 x	Double Bell Winchester M1894 Lever Action CO2 Airsoft Rifle (M-LOK Tactical)
1 x	SHS Ver2 High Speed Motor
2 x	Double Bell AKMS (Steel , Real Wood, QD Gearbox, Two Magazines Ver.)
2 x	Double Bell SCAR-SC AEG Rifle (Full metal, QD Gearbox, DE, Two Magaznies Ver.)
3 x	AD Custom SPETSNAZ SOBR CUSTOM AK-74 (Steel body, QD Gearbox)
1 x	WELL MB4416D METAL SNIPER RIFLE w/bipod/Scope
1 x	WELL Pro PPK-20 SMG (Advance Ver., 30RPS, Steel Upper Cover)
1 x	CYMA P90 70 rds Mid-Cap Magazine
1 x	SHS AK Aluminum Nozzle
1 x	WELL MB4413 METAL SNIPER RIFLE w/bipod/Scope (OD)
1 x	WELL Pro WE23-SL Rotary Minigun (Sportline)
1 x	WELL M24 Air-cocking Sniper Rifle with Scope & Bipod
1 x	SHS MP5 Nozzle
1 x	CYMA AK Contractor C107 Lower CNC Aluminum Airsoft Rail System
1 x	CYMA G36 Mid-Cap Magazine (130 rds)
1 x	CYMA Adjustable Full Size M16 Precision Rifle Stock
1 x	CYMA AK-74 Metal Mid-Cap Magazine (150 rds)
1 x	CYMA Rail Top Cover for AK / CM077 AEG Series (C194)
1 x	Cyma MP5 SD6 AEG
1 x	CYMA Steel Shturm 14mm CCW Flash Hider
1 x	Modify Air Seal Nozzle for M14 Series (Ver. 7)
1 x	PDI AEG Hopup W Hold Bucking
1 x	GATE USB-Link for GATE Control Station App
1 x	ESHOOTER KESTREL V2 BASIC Airsoft ETU (Rear wired)
1 x	ESHOOTER KESTREL V3 BASIC Airsoft ETU
1 x	Maple Leaf OHM AEG Tensioner Hard
1 x	DyTac Drop-In MOSFET Unit (Rear Wiring / T Plug)
1 x	WiiTech NGRS M4 Enhanced Hop-up Chamber
2 x	Double Bell AK-12 AEG Rifle (Full metal, QD Gearbox)
2 x	Double Bell Kar 98K Cartridge Catcher
1 x	Double Bell SCAR-SC AEG Rifle (Full metal, QD Gearbox, BK, Two Magaznies Ver.)
1 x	Double Bell/DBOYS Kar98k Gas Power Shell-Ejecting (Real wood)
2 x	Double Bell MK12 SPR Mod 1 AEG Airsoft Rifle (Full metal, QD Gearbox)
1 x	Cybergun CANiK TP9 Optic Plate & Charging Handle Set (FDE)
1 x	Cybergun CANiK TP9 Optic Plate & Charging Handle Set (Black)
1 x	Double Bell Bolt Set for 98K Shell Ejecting Rifle (Gas Ver.)
1 x	Bell 1911 Plastic Grip Panels (Tan)
1 x	Ares M45 55rds Shorty Midcap Magazine
1 x	Double Bell AKS-74N W/ GP-30 (Steel Body, Real Wood, QD Gearbox)
1 x	Double Bell DB-90/P90 Midcap Magazine (60rds)
1 x	DD Style AEG Pistol Grip DE
1 x	Double Bell M4 75rd AEG Mid-cap Magazine W/ TTI Style Base (Marking ver.)
1 x	Double Bell SCAR-H 90rds Mid-cap Magazine BK
1 x	Double Bell M16 VN 110rds Metal Mid-cap Magazine
1 x	Double Bell 416D Stock
1 x	DD Style Retractable Stock (Marking ver. , DE)
1 x	Double Bell M-Lok Sling Adapter
1 x	Bell G Series Plastic Nozzle (TM compatible)
1 x	Bell M9 Metal Nozzle
1 x	Bell 1911 Feed Lip (Tokyo Marui compatible)
1 x	Bell G17 Slide (Full marking, BK)
1 x	ARES Flashlight / Laser system Mount for Keymod
1 x	Bell ZEW Chrome/Tan Aluminum Slide Set For G Series17 (For TM,Be
1 x	Double Bell DB-90 P90 AEG (High-Speed Ver., QD Gearbox)
1 x	DD Style Retractable Stock (Marking ver. , BK)
1 x	Bell G17 Screw Set (For G Series GBB Pistol)
1 x	Bell 1911 Plastic Grip Panels (Gray)
1 x	Double Bell MK17 Kinetic MREX MKII SCAR-H M-LOK AEG DE
1 x	AD Custom Bravo M4 10'' M-LOK AEG (Metal-finishing Polymer Body, QD Gearbox, DE)
1 x	Double Bell G Series Competition Upgrade Kit
1 x	Double Bell M700 Gas Airsoft Rifle Real Wood Stock (Adjustable Velocity Ver.)
1 x	Bell ZEW Chrome CNC Aluminum Slide Set For G Series 17 (For TM,B
1 x	Amoeba External Barrel for Striker Sniper Rifle (AS-OB-003-L)
1 x	Bell 1911 Plastic Grip Panels (Brown)
1 x	Double Bell G36C Airsoft AEG Rifle
1 x	Bell 1911 Rubber Parts Set (For 1911 Series GBB Pistol)
1 x	Double Bell AK Metal Rear Sight
1 x	Double Bell MK17 Kinetic MREX MKII SCAR-H M-LOK AEG BK
1 x	Double Bell AK Metal Midcap Magazine (150 rds)
1 x	Double Bell G36 Mid-Cap Magazine, Fake Bullets Ver (50 rds)
1 x	DD Style AEG Pistol Grip BK
1 x	Double Bell AK74 Charging Handle
1 x	Amoeba External Barrel for Striker Sniper Rifle (AS-OB-003-S)
1 x	Double Bell AKS-74U (Steel , Real Wood, QD Gearbox, 2023 Ver., Two Magazines Ver.)

$24,462.35