CALL US :416-298-3303
Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)

Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
[AO5305-BK]

Price :
$129.95
5 of 5 Stars!
This is a whole lotta scope! I didn't have the SR-25 or the M24 so I had to put it on my M4A1 ( http://airsoftdepot.ca/catalog/product_info.php?cPath=102_104&products_id=1937 ) instead. I could BARELY get it on there with such a large 50mm/2 inch objective frontal lens on it. Make no mistake! This thing is huge! 14 inches long. It practically dwarfs the M4A1 but since I didn't have anything else to mount it on? I had to try it on SOMETHING. *Make sure to buy the 30mm mounting rings!!! Glad I didn't forget!* Illumination is actually in 3 different colors. Red, green and blue. My eyes are so sensitive to light that I have to leave it off which is actually fine because the reticle is etched in black so don't panic. The adjustable zoom is very nice, the scope adjusts exactly as it should and the 50mm/2inch lens gathers so much light! Very easy to use and comes with the manual. Trades ARE included and thankfully these are mostly on the bottom since they are bright white. A must have for any sniper! To install: (*NEEDS 30mm mount rings SOLD SEPARATELY!!!*) Use the Allen wrench (included with mounting rings) and take apart the mounting rings. Place the bottom pieces onto the rails. This will take a bit of wiggle and jiggle to get them in the right spot. Snug them up just a bit and place the scope inside. Adjust the mounting ring bases, moving them to another RIS slot if needed so the scope is not obstructed. Tighten up the mounting bases. Next, place the top pieces of the mounting rings on over the scope and get the Allen screws started but DO NOT TIGHTEN YET! Make absolutely sure the reticle is lined up so it isn't twisted. If the crosshair is even SLIGHTLY OFF? It can affect your accuracy and also any adjustments made with the knobs on the scope will be ineffective. Once the crosshair is properly aligned? Slowly tighten down the screws. Tighten them all down only a few turns at a time, so as to tighten them all as evenly as possible. Be very careful with these screws! They have very fine threads which make it difficult to align properly. You don't want to force them or strip them!
by Tyler Mathewson Date Added: Wednesday 13 May, 2015
Write Review Back

Result Pages:  1 

Displaying 1 to 1 (of 1 reviews)

1 x Airsoft Cardboard Target Paper (12pcs)
1 x TMC STAGE Airsoft Training System Target Set (1 Host + 2 Slave)
1 x Airsoft Target (2 Cardboard Target included)
1 x Vltor Style Buffer Tube (for WA GBBR)
1 x Double Bell Bolt Set for 98K Shell Ejecting Rifle (Gas Ver.)
1 x RA Steel CNC Trigger Set (for WE SCAR)
1 x PPS M870 Steel Right/Left Fork
1 x CNC Steel Sear( For WA )
1 x GHK AKM / GKM-08 Low Muzzle Velocity Nozzle
1 x RA steel CNC firing pin (FOR WE SCAR H)
1 x RA Adaptor for WE M4 GBB
1 x GHK M4 Standard Muzzle Velocity Nozzle
3 x PTS Enhanced Sling Plate – Modular Gen 2 (ESP-M2) GBBR
1 x WiiTech Enhanced Loading Nozzle Assembly for WA
1 x WST The Texas Star Target For Airsoft
1 x Compact Model Tool Kit
1 x Element Motor Gear Tool (Install & Remove)
1 x EmersonGear Linkage Reduction Metal Airgun Target
1 x FYT B-1121RZ Steel Target
1 x Modify Gear Key (professional) for SMOOTH
1 x Element Valve Key BK
1 x Matrix Steel AR15 Wrench
1 x EMERSON Aluminum Shooting Target -12 inches
1 x GHK M4 Low Muzzle Velocity Nozzle
1 x Steel Valve Lock For WA M4
1 x Double Bell Bolt Set for 98K Shell Ejecting Rifle (Spring Ver.)
1 x RA steel CNC firing pin base (FOR WE SCAR H)
1 x RA-Tech Precision inner barrel 6.01 (WE Open Bolt system, 225mm)
1 x G&P WA Reinforce Spring
1 x PPS M870 Magazine Tube Fixed Bar
1 x G&P WA Bolt Buffer
1 x RA steel CNC trigger assembly (FOR WE SCARH)
1 x ASP Sling Attachment Point (GBBR)
1 x 5KU Replacement Rubber Bullet for 40mm Cartridge (12pcs)
1 x WE 24 Rd G Model 17 / 18 / 34 MOS Ver. Gas Magazine ( Black )
1 x E&C G19 Green Gas Magazine (BK, For TM/WE Glock 19)
1 x Double Bell G19 Green Gas Magazine (2019 Ver.)
1 x Army TTI G17 Gas Magazine With Base (Fits Umarex/VFC)
1 x John Wick Continental Gold Coin
1 x DIY Classic 1911 Pistol Model
1 x Dual Dovetail Adapter Replaces J-Arm For PVS-14 (Aluminun)
1 x PVS-14 Weapon Mount QuickConnect Rail Mount Adapter
1 x HRG Sniper Gun Bag/Mat (Tan)
1 x Matrix Glock Pistol Foam Case BK
1 x Tactical MOLLE Safe Case For Phone&accessories (BK)
1 x Wosport Quick Deployment Rifle Bag
1 x HRG Medium-Sized Portable Pistol Bag (Tan)
1 x Emersongear Chest Rig to Vest Adapter Kit CB
1 x HRG Adaptive Chest Rig (Crye Precision Mulitcam)
1 x HRG V Style Scarab Multifunctional Tactical Vest (BK)
1 x HRG 7.62/AK/DMR Triple Magazine Panel (Multicam)
1 x HRG Modular Assault MK3 Chest Rig (CB)
1 x HRG 7.62/AK/DMR Triple Magazine Panel (BK)
1 x HRG CP Style CPC Combat Vest Multicam Black
1 x HRG 5.56/M4 Quadruple Magazine Panel (CB)
1 x EmersomGear JPC/AVS 6x6 Side Amor Carrier Set CB
1 x HRG Front Molle Plate (RG)
1 x Amomax Slim MOLLE Attachment
1 x HRG Front Molle Plate (BK)
1 x HRG Modular Assault MK3 Chest Rig With Fanny Pack(Multicam Black
1 x HRG D3CRH Tactical Chest Rig BK
1 x HRG CP Style CPC Combat Vest CB
1 x HRG FCPC Low Profile Combat Vest (RG)
1 x HRG FCPC Low Profile Combat Vest (Multicam)
1 x HRG JPC Style Plate Carrier (BK)
1 x HRG FCPC Low Profile Combat Vest (BK)
1 x HRG D3CRH Tactical Chest Rig RG
1 x EmersonGear Tactical Assault Cap RG
1 x Devgru Tacitcal Two Point Sling (BK)
2 x Matrix Tactical Balaclava Gen2 CB
1 x EmersonGear Tactical Assault Cap CB
1 x TMC Lightweight Adjustable Single Point Padded Gun Sling (RG)
1 x EMG / M1919 Browning Machine Gun Patch
1 x EMG / Salient Arms International DS 5.1 Patch
1 x EMG / Salient Arms International 1911 Patch
1 x Double Bell G36C Airsoft AEG Rifle
1 x Double Bell Winchester M1894 Shorty Lever Action CO2 Airsoft Rifle (Real wood)
1 x Double Bell Winchester M1894 Lever Action CO2 Airsoft Rifle (M-LOK Tactical)
1 x Amomax Universal Double Magazine Pouch BK
1 x GP Small Utility Pouch (Multicam)
1 x PDI 6.01mm Stainless Steel Precision Tight Bore Barrel (97mm)
1 x Sig Sauer Proforce M17 Airsoft Training Pistol (CO2)
2 x Canik x Salient Arms TP9 Elite Combat Airsoft Training Pistol BK
1 x Cybergun Licensed Colt 1911A1 GBB (BK)
1 x Cybergun DESERT EAGLE .50AE (Silver)
1 x Canik x Salient Arms TP9 Elite Combat Airsoft Training Pistol (FDE)
1 x Cybergun Desert Eagle L6 .50AE Tactical (Black, OEM By AW/WE)
1 x Cybergun DESERT EAGLE .50AE (Black)
1 x EMG TTI Sand Viper Combat Master GBB Airsoft (TT-SV0100)
1 x EMG TTI Pit Viper Combat Master GBB Airsoft
1 x Matrix Tactical Balaclava Gen2 BK
1 x CYMA G36 Mid-Cap Magazine (130 rds)
1 x Emersongear Arab kerchief - skeleton (CB)
1 x Emersongear Arab kerchief - skeleton (OD)
1 x Snow Wolf AUG 180Rds Midcap Magazine
2 x Matrix Iron Face Padded Lower Half Face Mask (Color:BK)
1 x Matrix Tactical SF Respirator Filter
1 x Matrix Iron Face Padded Lower Half Face Mask (Color:Woodland)
1 x Matrix Lower Face Mask (RG, Mini Version For Children/Girls etc.
1 x Matrix Iron Face Padded Lower Half Face Mask W/ Ear Cover(Color:BK)
2 x The Knight tactical Face Mask (Tan)
1 x The Knight tactical Face Mask (Gray)
1 x TMC Plastic Mask for SF Rail (DE))
1 x The Knight tactical Face Mask (OD)
1 x Matrix Tactical SF Respirator Half Mask (Functional)
1 x Pilot Face Mask w/ Steel Mesh Lower Face Protection Tan
1 x Pilot Face Mask w/ Steel Mesh Lower Face Protection OD
2 x Action Army AAP-01 "Assassin" Airsoft Gas Blowback Pistol BK
1 x Double Bell G Series Competition Upgrade Kit
1 x E&C Charging Handle Extension Kit
1 x Wire Guide System (M-LOK & Keymod, DE, MA Type)
1 x Cyma M4/M16 Dust Cover( Metal, For AEG )
1 x SI ISO-Tab Charging Handle (AEG, Red)
1 x Gate Quantum Trigger (Silver)
2 x Gate Quantum Trigger (Black)
1 x Gate Quantum Trigger (Matte Black)
1 x BCM­® GUNFIGHTER M-LOK™ RAIL PANEL KIT, 5.5-INCH FIVE PACK BK
2 x Tac Latch Handles (Red)
1 x Double Bell AK74 Charging Handle
1 x 5KU CNC Aluminum Bolt Catch for AR / M4 AEG
1 x AR15/M4 AEG pistol grip bottom plate heat sink
1 x PTS Dead Air Sandman-K Tracer Unit DE
1 x E&C M4/M16 Magazine Release (TM Style)
2 x AD Custom CNC M4 Competition Trigger (Anodized, BK, Type A)
1 x 8'' Gas Tube
1 x MP Style M-LOK Rail Cover BK
1 x 5KU ST-6 Skeletonized Tube for AK
1 x SI GRIDLOK Rail Furniture (Red)
1 x CYMA Rail Top Cover for AK / CM077 AEG Series (C194)
2 x CYMA Steel Shturm 14mm CCW Flash Hider
1 x DA EHANCED MUZZLE BRAKE(-14mm) DE
1 x SF Style 4 Prong Flash Hider (CCW-14mm, metal)
2 x 5KU QD Sling Plate With Swivel for M4/AR15 AEG
2 x MBUS Pro Metal Front/Rear Sights (With marking)
1 x DA EHANCED MUZZLE BRAKE(-14mm) BK
2 x SOTAC SI Style Quick Detach Sling swivel Loop (Steel)
2 x Detachable Swivel QD Sling Mount
1 x SF Style Warcomp 5.56 Flash Hider (CCW-14mm)
2 x KAC Style Rear Flip Sight
2 x CYMA AR15 Flip Up Front/Rear Sight
1 x PTS Enhanced Sling Plate – Modular Gen 2 (ESP-M2) AEG
1 x SF SOCOM WARCOMP 556 Closed Tine Flash Hider
2 x 5KU A-1 Sling swivel Mount
2 x Cyma M146 14mmCCW Flash Hider
1 x KAC Style QD Metal Flash Hider (14mm-)
1 x RSA Sling Mount (QD Version)
2 x Dominator™ Tactical Fibre Optic Front-Sight Assembly Green
1 x MP Style Quick Detachable Sling Mount (M-LOK, BK)
2 x Cyma MP Style Conversion Kit (077A, For Cyma AK74 Series)
2 x Matrix QD Sling Swivel Adapter Mount (M-Lok)
2 x PTS Low Profile QD Sling Swivel - S
1 x Matrix Lower Face Mask (BK, Mini Version For Children/Girls etc.
1 x TMC Plastic Mask for SF Rail (BK)
1 x Valken Zulu Airsoft Mesh Mask
1 x Action Army AAP-01 Compact "Assassin" Airsoft Gas Blowback Pistol BK
1 x 5KU Spitfire Flame Tracer 14mm CCW
1 x PTS Dead Air Sandman-K Tracer Unit BK
1 x Eshooter Flare M Tracer Unit ( Rainbow color, RGB color )
1 x Eshooter Flare Mono Tracer Unit
1 x PTS Dead Air Sandman-S Tracer Unit DE
1 x WST 3.5 inch 14mm CCW Flash Tracer Surpressor BK
1 x Double Bell AK Folding Stock Button
1 x M870 SGA Kit (BK, For PPS, Dominator, Real Steel)
1 x Harris Style Bidpod With Rail Adaptor
1 x M4x25mm screw with nut
1 x Double Bell M-Lok Sling Adapter
1 x Rainier Arms Avalanche Knurled Style Charging Handle for AEG SV
2 x Bipod Grip
1 x M-LOK/Keymod Forward Sling Mount
1 x Cyma Ak Airsoft Rear Single Point Ambidextrous Sling Plate
1 x BFG Universal ULoop Quick-detach Sling Buckle
1 x Steel QD Swivel (A)
1 x Double Bell AK Metal Rear Sight
1 x A&K STW Upper Metal Receiver (Systema PTW Compatible)
1 x Cyma AK Metal Selector Lever & Safety Set
1 x CYMA P90 70 rds Mid-Cap Magazine
1 x CYMA X47 Aluminum Handguard for AK Series
1 x CYMA CNC Aluminum Power Up Kit For M24/M705 Sniper Rifle
1 x Cyma AK QD Side Mount
1 x CYMA Adjustable Full Size M16 Precision Rifle Stock
1 x CYMA M14 Socom Front Set
1 x WE CO2 G-Series Magazine
$13,230.55
Share Product
 Share via E-Mail  
 Share on Facebook  Share on Twitter