CALL US :416-298-3303
Classic Army Nemesis ME-10 Full Metal M4 Airsoft AEG

Classic Army Nemesis ME-10 Full Metal M4 Airsoft AEG
[CA-CA111M]

Price :
$425.00
4 of 5 Stars!
Just got this rifle in the mail today. Thought I would point out some quick things that everyone should know. Please note, I Have Not Actually Shot This Rifle Yet!! All of these points are things I have noticed just based on taking the rifle out of the box and playing with it a little bit without a battery or bbs in it. First point to note... The rifle is wired to mini-tamiya, not deans. Honestly, I think this might just be the guys at ASD trying to be good to their customers by rewiring the rifle to a connector type most people already have. (And honestly, I had to go back and reread the description to see if it said deans, which it does, and needs to be corrected). Everywhere else on the internet says this rifle is wired to deans (every review) and is probably not wrong. I would be angry about the last point, except that on closer inspection of the rifle's instructions, that connector change probably saved me from a major mistake. Thinking the rifle was wired deans, I ordered myself a deans wired LI-PO battery to go along with it (as I don't have any). But I ordered a battery that is 1450MAH and 30-60C. Had the rifle and battery been wired the same, I stupidly would have plugged a 30-60C battery into a rifle with wiring that can only handle 20C. Probably just saved myself destroying a $425 rifle (eventually or immediately, not sure how quickly that would destroy the rifle's wiring or ECU). Upside, I do have a few tamiya wired LIPO's kicking around somewhere (I am switching back from HPA so they have been stored for awhile), I am just hoping they are small enough to fit into the battery compartment of this rifle. Of note, if you have watched any reviews on it, please notice that the battery compartment on this rifle is SMALL. Not impossibly small, but smaller than you probably think it is by looking at it. Final bad thing about this rifle... and take this with an entire shaker of salt, not just a grain, as I have zero experience with this system. The M-LOK rails are... well, a bit on the small side. I had to give the rails I bought a bit of encouragement to get them into the rail system, and honestly I am not sure they are installed correctly at this point. Again... huge disclaimer here, it is more than possible that I am just an idiot. I know from experience that there are two different sizes of keymod and that could be the issue here, but I am willing to be that the issue is actually user error, nothing more. Now, the good... holy crap this thing is awesome... except for a few parts that are required to be plastic, due to cost or heat or whatever... the entire rifle is metal. The weight is perfect. Not to heavy, but not so light that it feels like a toy (like other airsoft rifles in my experience). Even the flip up sights are mostly metal. The high-cap magazine is all plastic, but let's face it, once I have shaved down my G&G 120rnd midcaps to fit the mag well (the G&G logo on the mags makes getting them in place... tough... not impossible, but tough), I won't be touching that high-cap ever again. Yes, the bolt catch actually works, like it actually would on an unloaded AR-15 (ie; pull the charging handle back, push on the bottom of the bolt catch to lock the bolt in place, push charging handle foward). This will make adjusting the rotary hop-up unit a whole heck of a lot easier. All of the controls are ambi... ALL OF THEM... great if you're a lefty and looking for a rifle that you can easily grab. Another thing of note that isn't in the description here (or on the other reviews I found) is that my rifle came with a blade trigger, instead of your normal AR15 trigger... don't know if I just missed that or if is a thing that wasn't mentioned. All told, I cannot wait to get a battery in this thing and get it out on the shooting range to see FPS and accuracy and get it into play... hoping to do so soon. Despite my issues (which are mostly iss-me's not issues), this rifle looks and feels great in my hands... let's hope that translates to rounds down range.
by Bryan Thistle Date Added: Monday 23 March, 2020
Write Review Back

Result Pages:  1 

Displaying 1 to 1 (of 1 reviews)

1 x HRG Quick Release Combat Belt Multicam
1 x GP Small Utility Pouch (BK)
1 x Opsmen S18 Tactical Molle Pouch Tan
1 x GP Small Utility Pouch (RG)
1 x HRG Drop Pouch/Fanny Pack For AVS JPC CPC (BK)
1 x 5KU CNC Aluminum Trigger for M4 AEG
1 x PTS Enhanced Polymer Trigger Guard (AEG, DE)
1 x PTS Enhanced Polymer Trigger Guard (AEG, BK)
1 x Gun Fighter Stock MOD0 DE
1 x SF Style Warcomp 5.56 Flash Hider (CCW-14mm)
1 x Opsmen S18 Tactical Molle Pouch BK
1 x SBA3 Style Stabilizing Brace Stock For M4 Series BK
2 x CYMA Steel Shturm 14mm CCW Flash Hider
1 x CYMA Adjustable Full Size M16 Precision Rifle Stock
1 x DD Style Retractable Stock (Marking ver. , DE)
1 x LMT Style MK18 Stock
1 x DD Style Retractable Stock (Marking ver. , BK)
1 x Umarex H8R CO2 6mm Airsoft Revolver (3 Disk Magazines Ver.)
1 x Double Bell SCAR-L Stock (Tan)
1 x Cyma M146 14mmCCW Flash Hider
2 x A&K PKM Wood Kit
1 x Emersongear 18cm*11cm Pouch (WG)
1 x CTR Stock (OD Green)
1 x 5KU SS-8 Style with Folding Stock for GHK/LCT/CYMA /DBOYS AK Series
2 x PTS Griffin Armament Taper Mount Stealth Flash Suppressor (14mm CCW)
1 x Amomax Airsoft BB Portable Storage Pouch (3000 rds capacity)
1 x DA EHANCED MUZZLE BRAKE(-14mm) DE
1 x 5KU Zenitco PT-1 Style AK Side Folding Stock
1 x SF SOCOM WARCOMP 556 Closed Tine Flash Hider
1 x PTS Griffin Armament Taper Mount Minimalist Stealth Flash Suppressor (14mm CCW)
1 x 5KU M4 AEG Picatinny Rail Stock Base Adapter
2 x KAC Style QD Metal Flash Hider (14mm-)
2 x AKM Flash Hider
1 x Cyma M14 Metal Flashhider
1 x HRG Drop Pouch/Fanny Pack For AVS JPC CPC (Multicam)
1 x SF Style 4 Prong Flash Hider (CCW-14mm, metal)
1 x Enjeru
1 x T-Eagle Tactical Riflescope ER 1.2-6X24 IR HK W/ Mount DE
1 x EG ACOG Style 4x32 W/ RMR (Perfect Ver.,BK)
1 x WE M712 GBB Pistol W/ Stock (BK, KMT Marking Ver, Limited Set)
1 x Matrix PK-A Style Russian 1x25 Red Dot Optic for AK/SVD Series
2 x This is My Raifu
1 x Blackcat Aluminum LED RMR "REV 2" w/ G Series Mount - BK
2 x TMC Gen 4 Combat Pants NYCO fabric (MC, Waist 32'')
1 x Drinky Eepy (Sleepy Project) Vtuber Patch
1 x DIY Classic 1911 Pistol Model
1 x SnowWolf M3A1 Grease Gun AEG
1 x Aqua Tactical Helmet Patch
2 x Holo Sight Patch
1 x EMG TTI Combat Master ALPHA Extended Magazine (40 ROUNDS/ SV/ Green Gas)
1 x Matrix Lower Face Mask (BK, Mini Version For Children/Girls etc.
1 x Matrix Tactical Dual Respirator Half Mask
1 x KWC CZ 75 CO2 Magazine
1 x TMC Plastic Mask for SF Rail (BK)
1 x The Knight tactical Face Mask (OD)
1 x WE Luger P08 Magazine
1 x The Knight tactical Face Mask (Gray)
1 x Modify Aluminum Spring Guide for Type96 Series (9mm)
1 x Maple Leaf MR 60 degree GBB Hop-Up Rubber
1 x CowCow Hi-CAPA Guide Rod Silver
1 x SV Through the Heart Patch
1 x SHS Speed-Up Gear Set for V2/3 AEG GENIII (18:1, CL14002)
1 x Maple Leaf Autobot 60 degree GBB/VSR Hop-Up Rubber
1 x Army Armament 1911/R501/R601/R614 Enhanced Loading Nozzle
3 x AD Custom STI 2011 Hicapa Magwell
1 x 5KU Aluminum STI 2011 Style Magazine Base for Hi-Capa (Red)
1 x Modify Ultra Low Resistance Banana Connectors (2 pair/bag)
1 x SHS T-shape Connector Wire Set
1 x Modify Low resistance Silver-plated cord 180cm
1 x Armorer Works HX Competition magazine Release Button - Silver
1 x SHS High Speed Double Sector Gear Set (Ver.3)
1 x A&K STW Lower Gearbox Assembly for STW Airsoft Training Rifles
1 x 5KU STI Style Magwel For Hicapa 5.1 Blue
1 x AW Hi-Capa 5.1 Hammer Set for AW / WE Hi-Capa Series ( Silver )
1 x Bell 1911 Rubber Parts Set (For 1911 Series GBB Pistol)
1 x "Summer Gravel" Arknights Patch
1 x 5KU Stainless Steel Extended Slide Stop For Marui Hi Capa Airsoft GBB
1 x 5KU Aluminum STI 2011 Style Magazine Base for Hi-Capa (BK)
1 x Army 2011 Combat Master Pistol Grip ( BK )
1 x SHS Speed-Up Gear Set for V2/3 AEG GENIII (16:1, CL14008)
1 x Armorer Works HX Thumb Safety (Left & Right) Tan
1 x Darkness Maska Helmet Patch
1 x COWCOW Fiber Optic Front Sight For Hi-CAPA
1 x AD Custom Oil-Resistant Gas Fill O-Ring Set for Airsoft Gas Gun
1 x Maple Leaf CNC Trigger Box VSR-10 Sniper Rifles
1 x CYMA CNC Aluminum Power Up Kit For M24/M705 Sniper Rifle
1 x E&C M100 Spring (330-350fps)
1 x SHS Cylinder Set for AK
1 x ZCI M110 Spring
1 x SHS Cylinder For Gearbox 300-400mm (QG0008)
1 x SHS 7075 CNC Aluminium Silent Cylinder Head for G36 AEG
1 x E&C M90 Spring (290-310fps)
1 x TMC Original Cutting G3 Combat Pants (RG, Waist 32'')
1 x A&K STW/PTW M110 Complete Cylinder (400 FPS, Stainless Steel)
1 x SHS Cylinder Set for AK (Line Surface)
1 x Modify M80 Spring for APS/TYPE96/MOD24/SSG24 series Modify Bolt
1 x E&C Ver. 2 Cylinder Complete Upgrade Set
1 x WELL Pro PPK-20 SMG (Advance Ver., 30RPS, Full Steel Body)
1 x WELL MB4416D METAL SNIPER RIFLE w/bipod/Scope
2 x JUNK Well M11 Gas Magazine (32 Rounds)
2 x WELL Pro WE07 M4 SBR AEG (Gen2, ETU Ver., 30RPS)
2 x WELL Pro WE23-L Rotary Minigun
2 x Well Webley 6mm BB CO2 Revolver (Black)
2 x WELL MB4420 Spring Sniper Rifle
2 x WELL MB02 VSR-10 G-SPEC Bolt Action Airsoft Sniper Rifle W/ Bipod&Scope
2 x WELL Pro WE23-S Rotary Minigun
2 x WELL M24 Air-cocking Sniper Rifle with Scope & Bipod
2 x Well Pro Lancer Style M4 Pro-fit Magazine 180rds
2 x WELL Pro MB03AE M700 Upgrade Version W/ Scope & Bipod
2 x Well Pro Lancer Style M4 Pro-fit Magazine 180rds 3pcs Set
2 x Loading Plate for Well L96 (4401 Series)
2 x Well Pro 2800RD Magazine For WE23-X/Plus/H MINIGUN
2 x WELL MB4413 METAL SNIPER RIFLE w/bipod/Scope (OD)
2 x Well 28RD MB03 Series VSR-10 Magazine
2 x WELL MB01/04/05/08 Magazine
2 x WELL Pro WE23-Plus Rotary Minigun
1 x Valken Accelerate ProMatch 0.36g 2,500ct Biodegradable Airsoft BBs
1 x Valken Adult Knee Pads (1 Pair) Tan
2 x AD Custom 2011 Hicapa RMR Mount Base (TM, JAG ARMS, Army etc)
2 x AD Custom Polycarbonate Lens Protector (Dia. 26mm, For M300 etc)
1 x 12g CO2 Cartridge
1 x Valken Tank Kits/Parts - SLP QD Air Rig 42 Hose Only
2 x AD Custom Polycarbonate Lens Protector (Dia. 28mm, For T1/T2 etc)
2 x Motor Pinion Gear (O Shape)
2 x Matrix SORDIN Headset For Helmet (Basic Ver., FG)
1 x Place Holder 02
1 x Valken 0.20g Bio ACCELERATE Premium Grade BBs 5000ct
2 x VSG-S Grip For M-LOK/ Keymod BK
2 x A&K M4CQB STW Airsoft Professional Training Weapon
2 x Double Bell CAR-15 N23 PDW M4 Airsoft AEG Rifle
1 x Army Armament R36K GBB Rifle (Two Magazines Ver.)
2 x E&C M653 (AD Custom, Marking Ver.)
2 x E&C SI GRIDLOK 7'' PDW(AD Custom Marking Ver. )
2 x Cybergun Colt (T8/ MWS System) MK18 MOD1 GBB Airsoft Rifle
5 x E&C 417 Heavy Assault Rifle AEG (AD Custom Ver.)
1 x Well Pro 1200RD Magazine For WE23-S MINIGUN
1 x WELL MB4403 L96 Bolt Action Spring Sniper Rifle W/ Bipod&Scope
1 x WELL 4401/4402/4403 L96 Series Magazine (40 Rounds)
1 x WELL Pro WE23-H Rotary Minigun
1 x Well Pro PPK-20 30/80RD Variable Capacity Magazine
1 x Matrix QD Sling Swivel Adapter Mount (M-Lok)
1 x WELL Pro PPK-20 SMG (Advance Ver., 30RPS, Steel Upper Cover)
1 x Well Pro X9 100rds Mid-cap Magazine (For Well Pro WE01A SMG)
1 x WELL Pro PCC X9 SMG (Gen2, ETU Ver., 30RPS)
1 x Well G296A Full Metal 6mm CO2 Swing Out Revolver (Black)
1 x Pre-order: WELL Pro PPK-20 GBB SMG (Full Steel Body) ETA End of Oct. Save $50
1 x Well G296B Full Metal 6mm CO2 Swing Out Revolver (Black)
1 x Well G296C Full Metal 6mm CO2 Swing Out Revolver (Black)
1 x Well MB4420 Sniper Rifle Magazine
1 x Well G296D Full Metal 6mm CO2 Swing Out Revolver (Black)
1 x WELL Pro MB01AE "Alpine Sharpshooter" Upgrade Version W/ Scope & Bipod
1 x Well MB4404, 4405, 4410, 4411, 4412, 4413,4416 Magazine
1 x M16 M4 AR15 Carry Handle 20mm Weaver Rail
1 x ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (DE)
1 x AD Custom TTI Style Glock Magwell (For Gen3/Gen4)
1 x HRS PEQ-15 Class I IR Laser Aiming Device (DE)
1 x Matrix SORDIN Headset For Helmet (Basic Ver., Tan)
1 x EG LEAP Tactical 1.93'' Mount for Aimpont T1/T2
1 x AD Custom Polycarbonate Lens Protector (Eotech)
1 x AD Custom Hicapa Adaptor For Odin Loader (Made in Canada!)
1 x AD Custom Polycarbonate Lens Protector (Dia. 30mm, TLR1/T-Eagle)
1 x ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (BK)
1 x AD Custom STI Style Thumb Safety
1 x AD Custom Polycarbonate Lens Protector (Dia. 38mm, For MRO etc.)
1 x AD Custom Barrel Cover
1 x AD Custom Polycarbonate Lens Protector (For SRO)
1 x EMG Noveske N4 (T8/ MWS System) GBB Airsoft Rifle (BK)
1 x Cyma M14 AEG (Real Wood)
2 x Double Bell SCAR-H Designated Marksman Rifle Tan
2 x Cyma M14 AEG (OD, US Ver.)
1 x E&C SI GRIDLOK 8.5'' PDW(AD Custom Marking Ver. )
2 x Cyma M14 AEG (Wood imitation)
1 x E&C URG-I SMR MK8 13.5'' AEG (AD Custom Marking Edition)
1 x E&C US Marine M16A4 Full Metal AEG(AD Custom Marking Ver.)
1 x E&C KAC Style M110 AEG (Perfect edition)
1 x E&C ODIN Style 9.5'' AEG (AD Custom Ver.)
1 x Double Bell MK12 SPR Mod 1 AEG Airsoft Rifle (Full metal, QD Gearbox)
1 x E&C URG-I MK4 M-LOK 9.5''M4 AEG BK (AD Custom Marking Ver.)
1 x EMG Noveske N4 (T8/ MWS System) GBB Airsoft Rifle (DE)
1 x S&T Kar98k Spring Airsoft Sniper Rifle (Wood Ver.)
1 x S&T M40A3 Sportline Spring Power Rifle (OD)
$34,476.58
Manufacturer Info
Classic Army
 
View Other products
Share Product
 Share via E-Mail  
 Share on Facebook  Share on Twitter