Airsoftdepot Canada

Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
[AO5305-BK]

Price :

$129.95

This is a whole lotta scope! I didn't have the SR-25 or the M24 so I had to put it on my M4A1 ( http://airsoftdepot.ca/catalog/product_info.php?cPath=102_104&products_id=1937 ) instead. I could BARELY get it on there with such a large 50mm/2 inch objective frontal lens on it. Make no mistake! This thing is huge! 14 inches long. It practically dwarfs the M4A1 but since I didn't have anything else to mount it on? I had to try it on SOMETHING. *Make sure to buy the 30mm mounting rings!!! Glad I didn't forget!* Illumination is actually in 3 different colors. Red, green and blue. My eyes are so sensitive to light that I have to leave it off which is actually fine because the reticle is etched in black so don't panic. The adjustable zoom is very nice, the scope adjusts exactly as it should and the 50mm/2inch lens gathers so much light! Very easy to use and comes with the manual. Trades ARE included and thankfully these are mostly on the bottom since they are bright white. A must have for any sniper! To install: (*NEEDS 30mm mount rings SOLD SEPARATELY!!!*) Use the Allen wrench (included with mounting rings) and take apart the mounting rings. Place the bottom pieces onto the rails. This will take a bit of wiggle and jiggle to get them in the right spot. Snug them up just a bit and place the scope inside. Adjust the mounting ring bases, moving them to another RIS slot if needed so the scope is not obstructed. Tighten up the mounting bases. Next, place the top pieces of the mounting rings on over the scope and get the Allen screws started but DO NOT TIGHTEN YET! Make absolutely sure the reticle is lined up so it isn't twisted. If the crosshair is even SLIGHTLY OFF? It can affect your accuracy and also any adjustments made with the knobs on the scope will be ineffective. Once the crosshair is properly aligned? Slowly tighten down the screws. Tighten them all down only a few turns at a time, so as to tighten them all as evenly as possible. Be very careful with these screws! They have very fine threads which make it difficult to align properly. You don't want to force them or strip them!

by Tyler Mathewson Date Added: Wednesday 13 May, 2015

Write Review Back

Result Pages: 1

Displaying 1 to 1 (of 1 reviews)

Shopping Cart

1 x	Tactical UT Hot Button Remote Switch MLOK&Keymod, 2.5mm plug, BK
1 x	M16 M4 AR15 Carry Handle 20mm Weaver Rail
1 x	5KU Cmore Mount For HiCapa Type 4 BK
1 x	G style Precision 1.93'' High Mount For T1/T2 Red Dot
1 x	Armorer Works HX Sight Mount Kit
1 x	Dropwing Adaptive Light Mounts
1 x	Tactical UT Hot Button Remote Switch MLOK&Keymod, 3.5mm plug, BK
1 x	FUSION Style LightWing Adapter-Right BK
1 x	FAST LPVO Scope Mount 30mm Scope Rail Mount - BK
1 x	Sotac Remote Dual Pressure Switch Augmented Pressure Double (SF&Crane plug)
1 x	ET OGL Aiming Device（Red&IR Laser&LED）（Aluminum, BK）
1 x	ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (BK)
1 x	UT AX Button Switch For Aiming Device (DE, 2.5mm Plug)
1 x	G Style Super Precision 1.93" Rifle Scope Mount DE
1 x	FAST Style Micro Mount AP T1/T2 Red Dot Riser BK
1 x	WE-TECH X3400 Airsoft Shooting BB Chronograph (Green)
1 x	Picatinny WireGuide System Cable Management Clip
1 x	FMA LAB PEQ-NGAL LED Light + IR Red Laser DE
1 x	Dual Dovetail Adapter Replaces J-Arm For PVS-14 (Aluminun)
1 x	Classic Army Metal Mount Base For M14 Series (works with Cyma after modifying)
1 x	UT AX Button Switch For Aiming Device (BK, 3.5mm Plug)
1 x	5KU Cmore Mount For HiCapa Type 4 SV
1 x	FAST Style Micro Mount AP T1/T2 Red Dot Riser DE
1 x	Tactical UT Hot Button Remote Switch (Picatinay, 2.5mm plug, BK)
2 x	AD M300/600 Offset Mount (M-LOK & Keymod, BK)
1 x	Night-Evolution Low Drag Mount for T1 and T2 (AO1780)
2 x	WADSN MAWL-C1 Red laser/IR Laser/LED Light/IR Light (BK)
1 x	MI AK Tactical Railed Scope Mount (BK)
1 x	GG Style Forklift Mount Kit T1/T2 BK
1 x	5KU AK Scope Mount For T1/T2 Micro Red-dot
1 x	EG LEAP Mount For T2/T1/REMO etc
1 x	GG Style Forklift Mount Kit T1/T2 DE
1 x	ARES Flashlight / Laser system Mount for Keymod
1 x	5KU Aimpoint Carbon Mount (Bllack, MARUI HI-CAPA)
1 x	FMA LAB PEQ-NGAL LED Light + IR Red Laser BK
1 x	FMA Modlite ModButton Lite (2.5mm Plug, DE)
1 x	Tactical Mini ModButton Pressure Remote Switch BK (2.5mm plug)
1 x	AIMO Metal QD 25.4-30mm RDS Mount For AK Series
1 x	45° RMR Mount For Geissel 1.93 Scope Mount
1 x	Fast LPVO Mount With RMR/T1/T2 Offset Mount
1 x	G Style Super Precision 1.93" Rifle Scope Mount BK
1 x	GG Style Forklift Mount Kit Eotech/Rail DE
1 x	UT AX Button Switch For Aiming Device (BK, 2.5mm Plug)
1 x	M10 Style Fission Scope Mounts
1 x	Wire Guide System (M-LOK & Keymod, BK, MA Type)
1 x	Army Staccato RMR Mounting Plate
1 x	Raid X Style Red/IR Laser Aiming Device DE
1 x	Laser Bore Sight Collimator
1 x	HRS PEQ-15 Class I IR Laser Aiming Device (DE)
1 x	Tactical Mini ModButton Pressure Remote Switch BK (3.5mm plug)
1 x	Tactical UT Hot Button Remote Switch (Picatinay, 3.5mm plug, BK)
2 x	FMA One Oclock Offset Mount (DE)
2 x	FMA Remote Pressure Switch for Laser Devices (Style: Crane Plug / Black)
1 x	Raid X Style Red/IR Laser Aiming Device BK
1 x	Wire Guide System (M-LOK & Keymod, DE, MA Type)
1 x	EG LEAP Tactical 1.93'' Mount for Aimpont T1/T2
1 x	AD M300/600 Offset Mount (M-LOK & Keymod, DE)
1 x	MK18 Comp M2 Mount For Aimpoint M2/M3
2 x	GG Lerna Style Mount Kit For Eotech
1 x	FAST FTC Style Magnifier Mount For G43 BK
1 x	ARES Bipod Mount for Keymod
2 x	Armorer Works IPSC Optics Mount&Speed Cocking Handle(Left&Right)
1 x	AD Custom P320 RMR/SRO/Doc sight Mount Plate
1 x	UT AX Button Dual Switch For Aiming Device (BK,SF&3.5mm Plug)
1 x	FUSION Style ModButton Swtch&Mount For M300,M600 BK (2.5mm)
1 x	Double Bell G Series Competition Upgrade Kit
1 x	Cyma AK QD Side Mount
1 x	ACM L3 NGAL Red Laser W/LED Flashlight (Aluminun Version, DE)
1 x	FAST Style Tactical Riser Rail Mount BK
1 x	PVS-14 Weapon Mount QuickConnect Rail Mount Adapter
1 x	CD LCS MK1 M-LOK Switch Mount
1 x	AD Custom 2011 Hicapa RMR Mount Base (TM, JAG ARMS, Army etc)
1 x	AK Rear Sight Rail Mount
1 x	M-LOK & Keymod Offset Picatinny Rail Mount (M300/600 Ready,DE)
1 x	E&C HK416/417 Tactical Grip
1 x	PTS Dead Air Sandman-S Barrel Extension BK
1 x	DD Style AEG Pistol Grip DE
1 x	Matrix Tactical Charging Handle For M4/M16 /AEG DE
1 x	WELL Pro PCC X9 SMG (Gen2, ETU Ver., 30RPS)
1 x	A&K PKM Wood Kit
1 x	PTS Low Profile QD Sling Swivel - S
1 x	Detachable Swivel QD Sling Mount
1 x	Cyma Ak Airsoft Rear Single Point Ambidextrous Sling Plate
1 x	M870 SGA Kit (BK, For PPS, Dominator, Real Steel)
1 x	CAA Airsoft MICRO RONI G5 Pistol-Carbine Conversion for Glock
1 x	BCM Gunfighter KAG (M-LOK, BK)
1 x	BCM Gunfighter KAG (M-LOK, DE)
1 x	SF Style Warcomp 5.56 Flash Hider (CCW-14mm)
1 x	AD Custom DD MK18 II 9.5'' BK (Marking Ver.)
1 x	G Style 10'' SMR MK4 M-LOK Rail - OD Green
1 x	Matrix CNC Aluminum Extended Magazine Release for Glock Grey
1 x	4UANTUM Friction Pro-High Performance Bucking (AEG)
1 x	HEL STAR 6 Gen 3 LED Helmet Light/Marker (DE, Red)
1 x	Canik x Salient Arms TP9 Elite Combat Airsoft Training Pistol (FDE)
1 x	Cybergun Desert Eagle L6 .50AE Tactical (Black, OEM By AW/WE)
1 x	Tactical Helmet Mount Base (For M-LOK/Rail/Gopro, BK)
1 x	Manta Strobe (DE,Red)
1 x	The Knight tactical Face Mask (Gray)
1 x	TMC Plastic Mask for SF Rail (DE))
2 x	Matrix Tactical SF Respirator Half Mask (Functional W/ Microphone)
1 x	The Knight tactical Face Mask (Tan)
2 x	Valken Zulu Airsoft Mesh Mask
2 x	Matrix Lower Face Mask (BK, Mini Version For Children/Girls etc.
2 x	Matrix Tactical SF Respirator Filter
1 x	Matrix Iron Face Padded Lower Half Face Mask (Color:BK)
1 x	AFG 2 Grip (TAN)
1 x	AS Handstop (M-LOK/Keymod, BK)
1 x	AS Handstop (M-LOK/Keymod, DE)
1 x	B5 Style Handstop Standard (M-LOK, DE)
1 x	LINK Angled HandStop W/ Cable Management (M-LOK/Keymod, DE)
1 x	FAB Style PTK-VTS Combo (DE)
1 x	Matrix Tactical Dual Respirator Half Mask
1 x	TMC Plastic Mask for SF Rail (BK)
1 x	The Knight tactical Face Mask (OD)
1 x	Armorer Works VX9 Series (RMR Slide Ver. ) 23rds Gas Magazine
1 x	Armorer Works 5.1 Gas Magazine (BK, 30 rounds, TM/WE compatible)
1 x	Cybergun Desert Eagle .50 AE Original Parts #50 - #54 (by WE)
1 x	Armorer Works HX Competition magazine Release Button - Silver
1 x	Armorer Works VX9/Glock Series (Standard Slide Ver. ) Magazine
1 x	Cybergun DESERT EAGLE .50AE (Black)
1 x	Armorer Works Competition Grade HI-Speed 5.1 GBB(AW-HX2702)
1 x	Cybergun DESERT EAGLE .50AE (Silver)
1 x	Armorer Works HX Thumb Safety (Left & Right) Tan
1 x	Armorer Works HI-CAP Blowback Housing
1 x	EMG / SAI Utility Standard Gas Magazine (For RMR-cut Ver.)
1 x	Armorer Works Standard IPSC Pistol Silver (HX2201)
1 x	Armorer Works .38 SUPERCOMP Race Pistol (HX2401)
1 x	Armorer Works G Series Magazine (BK, 25 rounds, TM/WE compatibl
1 x	AIM MP5 Low Mount
1 x	Adjustable Tactical Light Mount(1'' Diameter)
1 x	G style Precision 1.93'' High Mount For MRO Red Dot
1 x	Tactical Mini ModButton Pressure Remote Switch DE (2.5mm plug)
1 x	DA EHANCED MUZZLE BRAKE(-14mm) BK

$9,169.03