Airsoftdepot Canada

Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
[AO5305-BK]

Price :

$129.95

This is a whole lotta scope! I didn't have the SR-25 or the M24 so I had to put it on my M4A1 ( http://airsoftdepot.ca/catalog/product_info.php?cPath=102_104&products_id=1937 ) instead. I could BARELY get it on there with such a large 50mm/2 inch objective frontal lens on it. Make no mistake! This thing is huge! 14 inches long. It practically dwarfs the M4A1 but since I didn't have anything else to mount it on? I had to try it on SOMETHING. *Make sure to buy the 30mm mounting rings!!! Glad I didn't forget!* Illumination is actually in 3 different colors. Red, green and blue. My eyes are so sensitive to light that I have to leave it off which is actually fine because the reticle is etched in black so don't panic. The adjustable zoom is very nice, the scope adjusts exactly as it should and the 50mm/2inch lens gathers so much light! Very easy to use and comes with the manual. Trades ARE included and thankfully these are mostly on the bottom since they are bright white. A must have for any sniper! To install: (*NEEDS 30mm mount rings SOLD SEPARATELY!!!*) Use the Allen wrench (included with mounting rings) and take apart the mounting rings. Place the bottom pieces onto the rails. This will take a bit of wiggle and jiggle to get them in the right spot. Snug them up just a bit and place the scope inside. Adjust the mounting ring bases, moving them to another RIS slot if needed so the scope is not obstructed. Tighten up the mounting bases. Next, place the top pieces of the mounting rings on over the scope and get the Allen screws started but DO NOT TIGHTEN YET! Make absolutely sure the reticle is lined up so it isn't twisted. If the crosshair is even SLIGHTLY OFF? It can affect your accuracy and also any adjustments made with the knobs on the scope will be ineffective. Once the crosshair is properly aligned? Slowly tighten down the screws. Tighten them all down only a few turns at a time, so as to tighten them all as evenly as possible. Be very careful with these screws! They have very fine threads which make it difficult to align properly. You don't want to force them or strip them!

by Tyler Mathewson Date Added: Wednesday 13 May, 2015

Write Review Back

Result Pages: 1

Displaying 1 to 1 (of 1 reviews)

Shopping Cart

1 x	HRG Medium-Sized Portable Pistol Bag (Tan)
1 x	AD Custom SPETSNAZ SOBR CUSTOM AK-74 (Steel body, QD Gearbox)
1 x	Valken Tactical 42 Double Rifle Tactical Gun Bag (BK)
1 x	PVS-14 Weapon Mount QuickConnect Rail Mount Adapter
1 x	HRG Tactical Seatback Molle Panel
1 x	AD Custom Bravo M4 10'' M-LOK AEG (Metal-finishing Polymer Body, QD Gearbox, DE)
1 x	EMG / Salient Arms International Blu Patch
2 x	Odin Innovations M12 Sidewinder Speed BB Loader (BK)
1 x	Loading Plate for Well L96 (4401 Series)
1 x	USAF
1 x	SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 285mm
2 x	Canada (Small, DE)
1 x	Canada (Small, Black)
1 x	SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 450mm
2 x	Eastern Force
1 x	Modify Aluminum Spring Guide for Type96 Series (9mm)
1 x	SHS Steel Oilless bushings with cross slot (7mm)
1 x	SHS Steel Oilless bushings with cross slot (8mm)
1 x	AD Custom Hicapa Adaptor For Odin Loader (Made in Canada!)
2 x	HRG Drop Pouch/Fanny Pack For AVS JPC CPC (BK)
1 x	SHS MP5 Nozzle
2 x	SHS Steel CNC Bearing Bushing 7MM (SHS-ZT0018)
1 x	Motor Pinion Gear (O Shape)
1 x	Valken Paintball/ HPA Universal Tank Vest Pouch BK
1 x	HRG Front Molle Plate (CB)
1 x	HRG Front Molle Plate (RG)
1 x	Tienly Infinity GT-35000 Motor Long Type
1 x	Modify Air Seal Nozzle for Classic Army/ ECHO1 SCAR Series
1 x	Motor Screw Set (4pcs)
1 x	Matrix Metal Skull Mask (RG)
1 x	Well 28RD MB03 Series VSR-10 Magazine
1 x	Double Bell SCAR-H Designated Marksman Rifle Tan
1 x	Modify Aluminum Spring Guide for Type96 Series (7mm)
1 x	Special Forces (Wing)
2 x	RSA Sling Mount (QD Version)
1 x	PDI 6.01mm Stainless Steel Precision Tight Bore Barrel (97mm)
1 x	Dominator™ Tactical Fibre Optic Front-Sight Assembly Green
1 x	Detachable Swivel QD Sling Mount
1 x	PTS Dead Air Sandman-L Barrel Extension DE
1 x	Cyma Ak Airsoft Rear Single Point Ambidextrous Sling Plate
1 x	PDI Raven 6.01 Steel Tightore Barrel For Pistol (113mm)
1 x	Bell 1911 Plastic Grip Panels (Tan)
1 x	Snow Wolf VSR-10 Magazine (Compatible with Double Bell)
1 x	Tactical Airsoft Tail Remote Protection Panel BK
1 x	PTS Dead Air Sandman-K Barrel Extension BK
1 x	MOE Illumination Kit (BK)
1 x	Cybergun CANiK TP9 Optic Plate & Charging Handle Set (FDE)
1 x	Modify Aluminum Piston for Type96 Series
1 x	PTS Low Profile QD Sling Swivel - S
1 x	Matrix Anti-fog Goggle /w Mask (BK, Built-in 2 Stage Fan)
2 x	Wire Guide System (M-LOK & Keymod, BK, MA Type)
1 x	FMA Caiman Bump Helmet (New Liner Gear Adjustment, M/L, RG)
1 x	5KU A-1 Sling swivel Mount
2 x	KJWorks SP-02 Shadow 2 CO2 Magazine
2 x	Canik x Salient Arms TP9 Elite Combat Airsoft Training Pistol BK
2 x	KJWorks P-09 Magazine (Green Gas)
2 x	Army Armament Extended 1911 Magazine W/Base Pad
1 x	Cybergun Licensed Colt 1911A1 GBB (Silver)
1 x	Armorer Works Adaptive Drum Magazine - HX Series BK
1 x	Cybergun Colt (T8/ MWS System) MK18 MOD1 GBB Airsoft Rifle
1 x	EMG TTI Pit Viper Magazine (Green Gas)
1 x	WinGun Break Top Major 3 1877 CO2 Powered Airsoft Revolver (Antique Black)
1 x	Armorer Works 5.1 Extended Gas Magazine (50 rounds, AW/TM/WE)
2 x	EMG TTI Pit Viper Combat Master GBB Airsoft
1 x	VFC AEG M4 Nozzle (Polymer)
2 x	Armorer Works 1911 Single Stack Magazine (BK)
1 x	EMG TTI Combat Master ALPHA Extended Magazine (40 ROUNDS/ SV/ Green Gas)
1 x	WE/Cybergun P228/229 Green Gas Magazine (Commercial Version)
1 x	Elcan Style Combat Scope 3x
1 x	Element Ball Bearing Metal 7MM
1 x	Wire Guide System (M-LOK & Keymod, DE, MA Type)
1 x	HRG Drop Pouch/Fanny Pack For AVS JPC CPC (Multicam)
1 x	Emersongear 18cm*11cm Pouch (BK)
1 x	KAC Rail Cover (4PCS)
1 x	PTS Enhanced Sling Plate – Modular Gen 2 (ESP-M2) GBBR
2 x	WE High Power Browning Magazine (20 Rds)
1 x	AIM 8-32 x 50E-SF Scope (Red / Green / Illuminated Reticle)
1 x	Amomax Airsoft BB Portable Storage Pouch (3000 rds capacity)
1 x	EG ACOG Style 4x32 (Perfect Ver.,BK)
1 x	ACM 3-9x40 Riflescope With Mount Rings
1 x	A&K 8mm Bearing (For M249/M60 HMG Series)
1 x	Cybergun CANiK TP9 Optic Plate & Charging Handle Set (Black)
1 x	Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
1 x	HRG Drop Pouch/Fanny Pack For AVS JPC CPC (OD)
1 x	T-Eagle Tactical Riflescope EO1-5X24 IR W/ Mount
1 x	AP 3XMAG-1 3X Mag Magnifier Scope With Fast Mount
1 x	Double Bell G Series Competition Upgrade Kit
1 x	Double Bell M-Lok Sling Adapter
1 x	MP Style M-LOK Rail Cover DE
1 x	Canik x Salient Arms TP9 Elite Combat Airsoft Training Pistol (FDE)
1 x	Umarex COLT SAA.45 CO2 Airsoft Revolver (COWBOY POLICE VERSION, Weathered)
1 x	Army Armament R45 Series Green Gas Magazine (18rds)
1 x	Armorer Works 1911 Single Magazine For NE10 Series
1 x	Umarex H8R CO2 6mm Airsoft Revolver (3 Disk Magazines Ver.)
1 x	Well G296B Full Metal 6mm CO2 Swing Out Revolver (Black)
1 x	Well G296D Full Metal 6mm CO2 Swing Out Revolver (Black)
1 x	Kar98k/MP44 Leather Sling
1 x	Double Bell/DBOYS Kar98k Strip Clip
1 x	Double Bell AK74N (Steel, Real Wood, QD Gearbox, 2021 Ver. Two Magazines Ver.)
1 x	WE P38 14rds Green Gas Magazine
1 x	Double Bell AKM (Steel, Real Wood, QD Gearbox, 2023 Ver., Two Magazines Ver.)
1 x	Double Bell/DBOYS Kar98k Metal Shells (5 pcs)
1 x	Harris Style Bidpod With Rail Adaptor
1 x	Double Bell/DBOYS Kar 98K Replica Dummy Rounds
1 x	WE Luger P08 Magazine
1 x	Double Bell/DBOYS Kar98k Gas Power Shell-Ejecting (Real wood)

$10,580.02