Airsoftdepot Canada

Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
[AO5305-BK]

Price :

$129.95

This is a whole lotta scope! I didn't have the SR-25 or the M24 so I had to put it on my M4A1 ( http://airsoftdepot.ca/catalog/product_info.php?cPath=102_104&products_id=1937 ) instead. I could BARELY get it on there with such a large 50mm/2 inch objective frontal lens on it. Make no mistake! This thing is huge! 14 inches long. It practically dwarfs the M4A1 but since I didn't have anything else to mount it on? I had to try it on SOMETHING. *Make sure to buy the 30mm mounting rings!!! Glad I didn't forget!* Illumination is actually in 3 different colors. Red, green and blue. My eyes are so sensitive to light that I have to leave it off which is actually fine because the reticle is etched in black so don't panic. The adjustable zoom is very nice, the scope adjusts exactly as it should and the 50mm/2inch lens gathers so much light! Very easy to use and comes with the manual. Trades ARE included and thankfully these are mostly on the bottom since they are bright white. A must have for any sniper! To install: (*NEEDS 30mm mount rings SOLD SEPARATELY!!!*) Use the Allen wrench (included with mounting rings) and take apart the mounting rings. Place the bottom pieces onto the rails. This will take a bit of wiggle and jiggle to get them in the right spot. Snug them up just a bit and place the scope inside. Adjust the mounting ring bases, moving them to another RIS slot if needed so the scope is not obstructed. Tighten up the mounting bases. Next, place the top pieces of the mounting rings on over the scope and get the Allen screws started but DO NOT TIGHTEN YET! Make absolutely sure the reticle is lined up so it isn't twisted. If the crosshair is even SLIGHTLY OFF? It can affect your accuracy and also any adjustments made with the knobs on the scope will be ineffective. Once the crosshair is properly aligned? Slowly tighten down the screws. Tighten them all down only a few turns at a time, so as to tighten them all as evenly as possible. Be very careful with these screws! They have very fine threads which make it difficult to align properly. You don't want to force them or strip them!

by Tyler Mathewson Date Added: Wednesday 13 May, 2015

Write Review Back

Result Pages: 1

Displaying 1 to 1 (of 1 reviews)

Shopping Cart

1 x	E&C URG-I MK4 M-LOK 9.5''M4 AEG BK (AD Custom Marking Ver.)
1 x	E&C MK18 RIS III SBR Airsoft Rifle AEG (Black, AD Custom Ver.)
1 x	Legion Baseball Cap (BK, Gold)
1 x	E&C US Marine M16A4 Full Metal AEG(AD Custom Marking Ver.)
1 x	E&C XM177E2 (AD Custom, Marking Ver.)
1 x	E&C KAC Style M110 AEG (Perfect edition)
1 x	E&C SI GRIDLOK 7'' PDW(AD Custom Marking Ver. )
1 x	Sig Sauer P320 ASP, .177 Caliber, BK
1 x	E&C ODIN Style 9.5'' AEG (AD Custom Ver.)
1 x	E&C MK18 RIS III SBR Airsoft Rifle AEG (Dark Earth, AD Custom Ver.)
1 x	E&C URG-I SMR MK8 13.5'' AEG (AD Custom Marking Edition)
2 x	EMERSON Shotgun Belt (CB)
1 x	UTX Hydration Tube Molle Clip
1 x	HRG V Style Scarab Multifunctional Tactical Vest (CB)
1 x	HRG CP Style CPC Combat Vest Multicam Black
1 x	Emersongear Pmac Magzine Style Powerbank Case (DE)
1 x	DIY Classic 1911 Pistol Model
1 x	EMG / Salient Arms International 1911 Patch
2 x	HRG Quick Release Combat Belt Multicam
1 x	Magi M Sog
1 x	TMC Original Cutting G3 Combat Pants (RG, Waist 30'')
1 x	HRG Shoulder Pad Set (Multicam)
1 x	HRG Foldable Dump Pouch OD
2 x	HRG Tactical Molle Combat Belt Tan
1 x	EmersonGear CP Style Adaptive Vest -Heavy Version (MCTP 500D)
1 x	HRG 5.56/M4 Quadruple Magazine Panel (CB)
1 x	EMG / Salient Arms International DS 5.1 Patch
1 x	HRG Adaptive Chest Rig (500D Nylon, CB)
1 x	HRG 7.62/AK/DMR Triple Magazine Panel (RG)
1 x	HRG FCPC Low Profile Combat Vest (CB)
1 x	HRG Shoulder Pad Set (CB)
1 x	HRG Modular Assault MK3 Chest Rig (CB)
2 x	HRG Tactical Quick Release MOLLE Riggers Belt Tan (Gen2)
2 x	HRG Foldable Dump Pouch Multicam
2 x	EMG / M1919 Browning Machine Gun Patch
1 x	FMA 3 type for 25mm Webbing (BK)
1 x	HRG 5.56/M4 Quadruple Magazine Panel (Multicam)
1 x	John Wick Continental Gold Coin
2 x	Double Bell Kar 98K Cartridge Catcher
1 x	Holo Sight Patch
1 x	TMC Original Cutting G3 Combat Pants (RG, Waist 32'')
1 x	HRG 5.56/M4 Quadruple Magazine Panel (BK)
1 x	HRG D3CRH Tactical Chest Rig RG
1 x	Amomax Slim MOLLE Attachment
1 x	Oolong Tea Survivor Patch
1 x	EMERSON Folding Magazine Dump Pouch (CB)
1 x	HRG 7.62/AK/DMR Triple Magazine Panel (CB)
1 x	WST Glock Series Double Magazine Belt Pouch
1 x	HRG SMG Long Type Magazine Pouch (BK)
1 x	HRG SMG Long Type Magazine Pouch (RG)
1 x	Amomax Universal Single Magazine Pouch BK
1 x	High Speed 9mm Soft Shell Pistol Magazine MOLLE/Belt Pouch - DE
1 x	HRG SMG Long Type Magazine Pouch (Multicam)
1 x	CYMA Rail Top Cover for AK / CM077 AEG Series (C194)
1 x	Bell 1911 Plastic Grip Panels (Brown)
1 x	Action Army AAP-01 Compact "Assassin" Airsoft Gas Blowback Pistol BK
2 x	Armorer Works Competition Grade HI-Speed 5.1 GBB(AW-HX2701)
2 x	Lambda Defense B&T GHM9 COMPACT-G PCC GBB Airsoft SMG
2 x	Armorer Works Competition Grade HI-Speed 5.1 GBB(AW-HX2702)
2 x	Double Bell AK Folding Stock Button
2 x	AD Custom CNC M4 Competition Trigger (Anodized, BK, Type A)
2 x	E&C Charging Handle Extension Kit
1 x	E&C Upgrade Cylinder Set For L96 Sniper Rifle
1 x	Action Army AAP-01 "Assassin" Airsoft Gas Blowback Pistol BK
1 x	SI GRIDLOK Rail Furniture (Red)
1 x	Maple Leaf CNC Trigger Box VSR-10 Sniper Rifles
1 x	5KU 5 Position Stock Pipe/Buffer Tube for M4 / M16 AEG Series
2 x	Armorer Works .38 SUPERCOMP Race Pistol (HX2401)
1 x	M4x25mm screw with nut
2 x	Rainier Arms Avalanche Knurled Style Charging Handle for AEG SV
2 x	Armorer Works Zombie killing kit for Cybergun/WE .50A/L6 GBB
1 x	Armorer Works Competition Grade HI-Speed 4.3 GBB(AW-HX2712)
1 x	Modify Aluminum Spring Guide for Type96 Series (7mm)
1 x	Loading Plate for Well L96 (4401 Series)
1 x	Tac Latch Handles (Red)
2 x	ASG Scorpion EVO 3 A1 CNC Stock Adapter
2 x	Gate Quantum Trigger (Silver)
2 x	DD Style AEG Pistol Grip BK
1 x	MOE Style Polymer Rails (BK)
1 x	5KU 5.1 Inch Aluminium Outer Barrel for Hi-Capa (M11, CCW)
1 x	E&C Hicapa Fiber Optic Front Sight
1 x	SHS SR-25 Nozzle (24mm)
1 x	PTS Dead Air Sandman-K Tracer Unit DE
2 x	Armorer Works IPSC Optics Mount&Speed Cocking Handle(Left&Right)
1 x	TMC Plastic Mask for SF Rail (DE))
1 x	Army Armament 1911/R501/R601/R614 Enhanced Loading Nozzle
1 x	PDI AEG Hopup W Hold Bucking
2 x	AW Hi-Capa 5.1 Hammer Set for AW / WE Hi-Capa Series ( Black )
1 x	TMC MANDIBLE For OC Highcut Helmet - Coyote Brown
1 x	PTS Dead Air Sandman-K Tracer Unit BK
1 x	AIM 8-32 x 50E-SF Scope (Red / Green / Illuminated Reticle)
1 x	AD Custom STI Style Thumb Safety
1 x	T-Eagle Tactical Riflescope ER 1.2-6X24 IR HK W/ Mount DE
1 x	Matrix Tactical SF Respirator Filter
1 x	KUBLAI Adjustable M-Lock Sling Stud QD Bipod
1 x	Blackcat Airsoft Adjustable LED SRO W/ Glock Mount - BK
1 x	CowCow Hi-CAPA T2 Trigger Red
1 x	ASG M40A3 Sniper Rifle Magazine (27rds)
1 x	Ladder Rail Cover (Tan)
1 x	WST 3.5 inch 14mm CCW Flash Tracer Surpressor BK
2 x	Classic Army M24 25rds Magazine
2 x	PTS Enhanced Polymer Grip (EPG) AEG OD Green
1 x	PTS Enhanced Polymer Grip (EPG) AEG BK
1 x	S. Receiver Rail for T.Marui M870 Tactical Shotgun
1 x	Matrix Iron Face Padded Lower Half Face Mask W/ Ear Cover(Color:BK)
1 x	CowCow Hi-CAPA T2 Trigger Black
1 x	Modify Air Seal Nozzle for M14 Series (Ver. 7)
1 x	Matrix Lower Face Mask (BK, Mini Version For Children/Girls etc.
2 x	Armorer Works HI-CAP Blowback Housing
1 x	Modify Air Seal Nozzle for PSG-1 Series
1 x	HRG Tactical Molle Combat Belt (Gen2, Multicam)
2 x	Armorer Works Doc Sight Red dot
2 x	Armorer Works HX Thumb Safety (Left & Right) Gold
1 x	5KU Stainless Steel Extended Slide Stop For Marui Hi Capa Airsoft GBB
1 x	R8T Red Dot Sight (2024 Ver.)
1 x	Double Bell VSR-10 Bipod Rail
1 x	Matrix Tactical SF Respirator Half Mask (Functional)
1 x	The Knight tactical Face Mask (Gray)
2 x	AW Hi-Capa 5.1 Hammer Set for AW / WE Hi-Capa Series ( Silver )
1 x	5KU Limcat Speed Cat Aluminum Slide for TM Hicapa
2 x	Double Bell/DBOYS Kar98k Metal Shells (5 pcs)
1 x	Tactical Airsoft Tail Remote Protection Panel BK
1 x	Army Extended Hicapa Magazine Release
2 x	WELL MB01/04/05/08 Magazine
1 x	Matrix Tactical SF Respirator Half Mask (Functional W/ Microphone)
2 x	Armorer Works HX Competition magazine Release Button - Silver
1 x	Double Bell/DBOYS Kar 98K Replica Dummy Rounds
1 x	HW MRO /W Precision Mount (Perfect edition)
2 x	Well 28RD MB03 Series VSR-10 Magazine
1 x	R5 Style Compact 2 MOA Red Dot
1 x	AP 3XMAG-1 3X Mag Magnifier Scope With Fast Mount
1 x	A&K Masada Hopup
1 x	A&K Masada Selector Switch Assembly
1 x	HRG Tactical Molle Combat Belt (Gen2, Black Multicam)
2 x	MOE Grip (Full Trades Ver., BK)
1 x	5KU Cmore Mount For HiCapa Type 4 BK
1 x	AD Custom M-LOK 3 slots rail
1 x	TMC Plastic Mask for SF Rail (BK)
1 x	Maple Leaf OHM AEG Tensioner Hard
1 x	5KU Spitfire Flame Tracer 14mm CCW
2 x	Snow Wolf VSR-10 Magazine (Compatible with Double Bell)
1 x	Army Hi-Capa 5.1 Steel Hammer Assembly
1 x	Eshooter Flare Mono Tracer Unit
1 x	Army 2011 Combat Master Pistol Grip ( BK )
1 x	Double Bell VSR-10 Magazine
1 x	Valken Zulu Airsoft Mesh Mask
1 x	Bipod Grip
1 x	BCM® GUNFIGHTER M-LOK™ RAIL PANEL KIT, 5.5-INCH FIVE PACK BK
1 x	Cyma AK Metal Selector Lever & Safety Set
1 x	AD Custom 2011 Hicapa RMR Mount Base (TM, JAG ARMS, Army etc)
1 x	Modify Selector Plate for AK
1 x	SF Warden Barrel Extension (BK, 14mm CCW)
1 x	PTS Enhanced Polymer Grip - Compact (EPG-C) AEG OD
1 x	Double Bell VSR-10 Scope Mount Base
1 x	Maple Leaf Hop-Up Chamber for 1911
1 x	5KU Staccato Magwell For Hicapa (Red)
1 x	5KU Steel Hammer For Marui M1911A1 Colt Government (Spur Type)
1 x	SHS AK Aluminum Nozzle
2 x	Emerson BOOGIE REGULATOR GOGGLE CLEAR VER. (Asian fit)
1 x	Maple Leaf MR 50 degree AEG Hop-Up Rubber
1 x	A&K/E&C M110 190 rds midcap magazine
1 x	Double Bell SCAR-H 90rds Mid-cap Magazine BK
2 x	E&C 417 Polymer Mid-cap Magazine 110 BBS
1 x	Snow Wolf AUG 180Rds Midcap Magazine
1 x	Double Bell G36 Mid-Cap Magazine, Fake Bullets Ver (50 rds)
2 x	Armorer Works 5.1 CO2 Magazine (BK, 30 rounds, TM/WE compatible)
1 x	SI ISO-Tab Charging Handle (AEG, Red)
1 x	5KU ST-6 Skeletonized Tube for AK
1 x	E&C M4/M16 Magazine Release (TM Style)
2 x	Armorer Works Adaptive Drum Magazine - HX Series BK
1 x	Double Bell/DBOYS Kar98k Strip Clip
1 x	Gate Quantum Trigger (Black)
1 x	Cyma M4/M16 Dust Cover( Metal, For AEG )
1 x	5KU Raptor Ambi-Charging Handle For M4 AEG Series
1 x	A&K SVD High-Cap Magazine (180rds)
1 x	A&K M24 Magazine (15 rds)
1 x	S&T Spare Magazine for Kar98K/M1903A1 Spring Rifle (25 rds)
1 x	EMG TTI Combat Master ALPHA Extended Magazine (40 ROUNDS/ SV/ Green Gas)
1 x	Lancer Tactical 28rd LT-28/Cyma M24 Sniper Rifle Magazine
1 x	8'' Gas Tube
1 x	5KU CNC Aluminum Bolt Catch for AR / M4 AEG
1 x	Double Bell AK74 Charging Handle
1 x	Well MB4420 Sniper Rifle Magazine
1 x	KWC CZ 75 CO2 Magazine
1 x	Bolt cover plate( For AEG )
1 x	E&C Metal Body Spring Set For M4/ M16 Series AEG
1 x	Maple Leaf Hopup Adjustment Wheel Marui/WE 1911/Hi-Capa
1 x	Cyma CM077 AK Pistol Grip (BK)
1 x	E&C 416 A5 Pistol Grip
1 x	WE G-Series/Hicapa Gas Magazine Fill Valve
1 x	DD Style AEG Pistol Grip DE
1 x	WE Hi-capa Feed Lip W/Gas Route
1 x	E&C HK416/417 Tactical Grip
1 x	E&C 416D Pistol Grip
1 x	WE Loading Nozzle For WE HICAPA (15mm)
1 x	Double Bell SCAR-H 90rds Mid-cap Magazine DE
1 x	E&C 130rds M110/SR25 Midcap Magazine
1 x	WE M712 GBB Pistol W/ Stock (BK, KMT Marking Ver, Limited Set)
1 x	KJWorks P-09 Magazine (Green Gas)
1 x	Dominator™ 8+1 Magazine Extension Tube For DM870
1 x	Armorer Works HX Sight Mount Kit
1 x	Cybergun DESERT EAGLE .50AE (Silver)
1 x	EMG / SAI Utility Compact Gas Magazine (For RMR-cut Ver.)
1 x	Adaptive Drum Magazine Shockproof Pads - Black
1 x	Armorer Works Competition Grade HI-Speed 5.1 GBB(AW-HX2502)
1 x	Cybergun CANiK TP9 Optic Plate & Charging Handle Set (FDE)
1 x	Cybergun CANiK TP9 Optic Plate & Charging Handle Set (Black)
1 x	Cybergun DESERT EAGLE .50AE (Black)
1 x	AW HX / NE Gas Magazine Rubber Gas Route
1 x	AW VX/G Series Magazine Feed Lip
1 x	Armorer Works 1911 Single Stack Magazine (BK)
1 x	Armorer Works Adaptive Drum Magazine - VX/ G Series BK
1 x	AW VX 7 / 9 (Optics Ready ver) Gas Magazine Rubber Gas Route
1 x	Armorer Works HX Magazine Release Button - Black
1 x	Armorer Works Tactical Carbine Kit - Glock/VX SERIES BK
1 x	Armorer Works 5.1 Gas Magazine (BK, 30 rounds, TM/WE compatible)
1 x	EMG / FALKOR™ BLITZ SBR AR15 Patch
1 x	Cybergun Desert Eagle L6 .50AE Tactical (Black, OEM By AW/WE)
1 x	EMG / SAI Utility Standard Gas Magazine (For RMR-cut Ver.)
1 x	Cybergun Desert Eagle .50 AE Original Parts #50 - #54 (by WE)
1 x	Armorer Works HX Thumb Safety (Left & Right) Black
1 x	Armorer Works Competition Grade HI-Speed 5.1 GBB(AW-HX2002)
1 x	Armorer Works Standard IPSC Pistol Silver (HX2201)
1 x	Armorer Works G Series Magazine (BK, 25 rounds, TM/WE compatibl
1 x	AW Custom Dominator M4 Magazine Adapter for GLOCK Series
1 x	Armorer Works VX8100 Semi/Full Auto GBB(AW-VX8100)
1 x	Armorer Works VX9 Series (RMR Slide Ver. ) 23rds Gas Magazine
1 x	Armorer Works 5.1 Gas Magazine (SV, 30 rounds, TM/WE compatible)
1 x	Armorer Works BLACK ACE HI-Speed 5.1 GBB(AW-HX2003)
1 x	Armorer Works 1911 Single Magazine For NE10 Series
1 x	DOMINATOR™ 4X 12 GAUGE SHOTSHELL CADDY / STRIPPER CLIP (RED)
1 x	Armorer Works VX9/Glock Series (Standard Slide Ver. ) Magazine
1 x	Armorer Works HX Thumb Safety (Left & Right) Tan
1 x	WWII USA ARMY X Harness
1 x	WWII M1 Cartridge Belt
1 x	WWII German Army Full Gear Kit

$20,488.99