CALL US :416-298-3303

Refund Policy


General Warranty and Return Policy:


Last Updated: June 30th, 2018

Global Policies (applies to all category based policies):
  1. Only brand new products with its original packaging can be returned back to us within 7 days since the product was purchased in store, or parcel was received by the end user/customer from online orders. The shipping cost of the product and the return shipping to be sent back to us will not be covered for refund.
  2. Depending on the rules specified under category based policies, we may accept returns of opened products but a 20% restocking fee will be applied. Shipping cost of the product and the return shipping to be sent back to us will not be covered for refund.
  3. If we deem a returned product has been abused by the end user as written within the individual policies below, we reserve the right to refuse repair, exchange, or refund of the product. We will not return the product back to the end user unless they pay for the shipping cost to be shipped back. Under this condition, IF we supplied a prepaid return shipping label to the customer earlier on, we may expect the end user to pay for the full price of the prepaid label as well.
  4. We do not guarantee perfect finishing and/or quality of the products we carry; we simply carry what the manufacturer offers us. Depending on the situation, we are capable of testing an airsoft gun before shipping out upon request.
  5. All photos on our website are purely for reference purposes only. Both the packaging and actual product may slightly differ from actuality due to slight changes per batch when procured from manufacturer and/or supplier.
  6. We do not guarantee that the original packaging/box of a product is free from dents or damage. We only guarantee that the product housed within the packaging is of working order and brand new in nature.
  7. All sales are final for products listed as “clearance or junk.” No warranty is provided under any circumstances whatsoever under said category. Please call or email us at support@airsoftdepot.ca for specific inquiries on clearance or junk items before purchase if unsure.
  8. All sales are also final for consumables and any battery products. Consumables are in regards to products such as (but not limited to) green gas, BBs, silicon oil/grease, and Thunder Bs.

Airsoft Guns:
  1. All airsoft gun sales are FINAL. We do not accept returns of an airsoft gun unless the gun itself is defective.
  2. All airsoft guns* carry a standard, 7 days warranty provided by Airsoft Depot Canada since the day the gun was purchased in store, or parcel was received by the end user/customer from online orders. We encourage customers to test the purchased airsoft gun as soon as possible and contact us within 48 hours of purchase. We only accept exchange for out-of-the-box defective airsoft gun products as long as a replacement of the same product is available. We can only provide a refund if a replacement cannot be provided. Please kindly give us up to 3 business days for a proper response.
  3. *Special instructions bolded or highlighted in red on certain product pages in the product descriptions may override the above rule under this (Airsoft Guns) category.
  4. Any sort of modifications done to the airsoft gun (during the warranty period) internally or externally would automatically void our warranty service. For example, painting your gun, upgrading the internals, or modifying the battery connectors to deans or vice versa with Tamiya connectors and ultimately frying your gun.
  5. Do not attempt to diagnose or repair an airsoft gun if you are faced with an issue/error from the airsoft gun itself. Stop all activity and use of the gun, and report the incident in detail to support@airsoftdepot.ca. Depending on situation and the severity of the matter, we will provide diagnosis and instructions on the issue and/or provide approval for the airsoft gun to be sent back for repair or exchange.
  6. Assuming the airsoft gun is deemed defective and approved for return to be exchanged or repaired, the end user customer must send it back in its original factory packaging (everything that originally came with the gun such as magazine, instructions booklet, clear plastic bag, etc). The customer is expected to wrap the packaging of the gun in completely opaque wrapping paper or garbage bag and seal well with tape. If certain conditions are met, we may instead provide a prepaid return shipping label and return shipping instructions via email.
  7. If an airsoft gun has been sent/shipped back to us under our approval during the warranty period, the cost of return shipping will be covered as a store credit (assuming a return shipping label was not provided). The store credit can be redeemed and used for future purchases on this website (airsoftdepot.ca). If the airsoft gun has been inspected, repaired, and/or replaced, we will cover the reshipping cost.
  8. If the airsoft gun has been deemed working and not defective upon inspection by our Techs, we will have you pay for the reshipping cost back to your shipping address. If a prepaid return shipping label has been provided with, we will also have you pay for said label as well. The same rule applies if the airsoft gun has been deemed damaged from customer abuse. Customer abuse happens when the end user attempts to repair, modify/tinker/take apart, upgrade the airsoft gun during the warranty period, screws it up, and provides false pretense in regards to the damage itself. Physical damage and mishandling, such as dropping the gun, using low quality “Can-Tire/Walmart-tier BBs”, or using the wrong rated battery (i.e. using high discharge rate battery on an airsoft gun that’s not rated for it) will also count as “customer abuse.” Abused products do not qualify for any sort of refund or exchange.
  9. Manufacturer included "bonus items" such as, but not limited to cleaning rod, sample bb, bb loader, sling, battery, and charger, are not eligible for warranty. These "bonus items" are included AS IS and are included for testing purposes by the manufacturer. We do not guarantee the proper function of said "bonus items."

Parts or Gear:
  1. A one week warranty is only provided for out-of-the-box defective parts or gear products.
  2. We do not guarantee the fitting of the parts/scopes/gears. Please do research or ask up front.
  3. No returns or exchange for all BDUs, shirts, pants, goggles, helmets, and boots/shoes due to hygiene reasons unless it is reported "defective" within 48 hours of purchase. Please kindly do your own research, send us an email, or message us on Facebook for questions on sizing.

  1. Bell Handgun Extended Warranty Program is carried by Airsoft Depot Canada and its authorised retailers ONLY.
  2. Free parts and repair service within 30 days of purchase or when parcel is received from Online Orders.
  3. The abuse and unauthorized disassembly of Bell handguns are not covered by this Warranty Program and voided.
  4. Customer is responsible for the shipping cost for the handgun to be repaired at authorized retailers. Retailers will pay for the return shipping back to customers.
  5. The Customer is only responsible for both shipping and return shipping if there is nothing wrong with the handgun itself.
  6. Airsoft Depot Canada offers basic troubleshooting for all Bell handgun bought at authorized retailers via Online Support Center at: support@airsoftdepot.ca. Please give us up to 7 days for a proper response. Please and Thanks.
3 x Night Evolution Tail Pressure Switch for WMX200
1 x SF M600V LED Strobe Scout Light (DE, 450 Lumens)
1 x G17 Complete Nozzle Housing Assembly (For WE,TM,E&C etc.)
1 x Armorer Works Glock/VX Series Slide Catch
1 x Wii Tech Glock (T.Marui) CNC Steel Enhanced Sear
3 x Sotac Charge MPLS Style Helmet Light
2 x SF X400 Tactical LED Pistol Light w/ Red Laser BK
3 x Night Evolution Dual Function Tape Switch (NE 07010)
1 x SF X300 LED Flashlight (300 lumens, BK, Perfect Edition)
2 x WADSN MAWL-C1 Red laser/IR Laser/LED Light/IR Light (BK)
2 x Mad Hatter Classic Hat BK
3 x Matrix CNC Aluminum Extended Magazine Release for Glock BK
1 x Night Evolution Tactical Augmented Pressure Switch (SF&3.5mm)
1 x Guns Modify 125% Nozzle Reset Spring for Tokyo Marui G Series (2pcs)
1 x Army Ambidextrous Thumb Rest For Glock
1 x FUSION Style ModButton Swtch&Mount For M300,M600 DE(Flashlight)
2 x PTS ZEV Combat Sight (Front & Rear) - TM G series
2 x Tactical Mini ModButton Pressure Remote Switch BK (SF plug)
3 x Bell G17 Screw Set (For G Series GBB Pistol)
2 x Bell G17 Slide (Full marking, BK)
2 x Night Evolution Remote Dual Switch (1 Plug, NE07014-BK)
1 x Sotac X300/X400 Remote Dual Switch Assembly BK
1 x FUSION Style ModButton Swtch&Mount For M300,M600 DE (3.5mm)
2 x WiiTech G Series 17 Series (T.Marui) CNC Hardened Steel Hammer
1 x Maple Leaf Hopup Adjustment Wheel Marui/WE GBB Pistols
1 x SIG DAGGER LEAD .177 PELLETS (500 rds)
1 x Sig Sauer M17 P320 ASP, .177 Caliber, Coyote Tan
1 x SIG VENOM LEAD .177 PELLETS (500 rds)
1 x Armorer Works Tactical Carbine Kit - Glock/VX SERIES BK
2 x HighReady Gear Tactical LED Flashlight (500 Lumens)
1 x Bell Glock Series Nozzle Housing Set (TM, Bell Compatible)
1 x ZEV Style Magwell for G17/18/19 Gen4/Gen3 Gas Pistol BK
1 x Ranger Plate for G Series Magazine (For TM, Tan)
1 x Sotac Full Metal MAWL-C1 Green laser/IR Laser/LED Light/IR Light (BK)
1 x SF M300B LED Scout Light BK(400 Lumens, Double swtich version)
2 x A&K M249 Para Stock
1 x Dominator™ Tactical Fibre Optic Front-Sight Assembly Red
1 x EARMOR M13 MTEK M-LOK Helmet Rails Adapter Attachment Kit
1 x Gun Fighter Stock MOD0 BK
1 x CYMA Airsoft M5 External Battery Box Case
2 x Matrix 14CCW Threaded Mock Silencer Adapter for G36 Series
1 x FMA Fackplane MOLLE TYPE (BK)
1 x HM Front Grip for Glock Brace
1 x SF M600C Mini Scout Light W/ Modbutton Switch (BK, 340 Lumens)
1 x Modify Tappet Ver. 3
1 x WiiTech Glock (T.Marui) CNC Steel Knocker
1 x Dominator™ 8+1 Magazine Extension Tube For DM870
1 x Tac-Sky ARC Helmet Mount For COMTAC DE
2 x Ztactical Comtac II
1 x Ztactical U-94 Style PTT (Kenwood 2 Pin)
1 x S&T Type 64 Scope Mount
1 x FMA One Oclock Offset Mount (BK)
1 x HL Style Headset W/ Noise Cancelling/Sound Pickup PINK
2 x FUSION Style LightWing Adapter-Right BK
2 x GG Style Forklift Mount Kit Eotech/Rail DE
2 x Double Bell G Series Competition Upgrade Kit
1 x 25mm Low Mount Rings
2 x CD LCS MK1 M-LOK Switch Mount
1 x HL Style Headset W/ Noise Cancelling/Sound Pickup For Helmet FG
3 x G style Precision 1.93'' High Mount For MRO Red Dot
2 x Earmor M32H MOD4 Headset for FAST Helmets (2022 Ver., FG)
2 x G Style Super Precision 1.93" Rifle Scope Mount DE
2 x AD Custom 2011 Hicapa RMR Mount Base (TM, JAG ARMS, Army etc)
1 x Riser Mount For Aimpoint T1
2 x S&T M1903A3 Scope Mount
1 x T1 Scope Low Mount (TAN)
3 x SF RM45 Offset Mount For M300/600 Tac Light DE
2 x Night-Evolution Low Drag Mount for T1 and T2 (AO1780)
2 x Element Motor Gear Tool (Install & Remove)
1 x BD MI Style Rail Barrel Nut For GBBR
2 x Armorer Works HX Sight Mount Kit
1 x Amoeba External Barrel for Striker Sniper Rifle (AS-OB-003-S)
1 x Tactical Mini ModButton Pressure Remote Switch DE (3.5mm plug)
1 x Well MB4404, 4405, 4410, 4411, 4412, 4413,4416 Magazine
1 x Flip Lens Protector
2 x T5028 Tactical Mount (Dia. 30mm/25mm)
1 x Tac Latch Handles (Red)
1 x FMA 3 type for 25mm Webbing (DE)
3 x ASP Sling Attachment Point (GBBR)
1 x AK Magazine Clamp
1 x PPS M870 Rail
1 x Tactical UT Hot Button Remote Switch MLOK&Keymod, 3.5mm plug, BK
1 x Night Evolution Tactical Augmented Pressure Switch(2x3.5mm,DE)
1 x RA steel CNC trigger assembly (FOR WE SCARH)
1 x RA steel CNC firing pin (FOR WE SCAR H)
2 x T.Marui M870 barrel mount Installation Tool
1 x CYMA M14 Socom Front Set
2 x Double Bell 3-9X40 Rifle Scope for Kar 98k WWII Rifle
1 x CYMA X47 Aluminum Handguard for AK Series
1 x Ladder Rail Cover(BK)
2 x HRG Modular Assault MK3 Chest Rig (BK)
2 x FYT B-1121RZ Steel Target
1 x Keymod System GolfBall Pattern Short Grip (Silver)
1 x HRG Shoulder Pad Set (Multicam)
1 x KAC Style Rear Flip Sight
1 x AD Custom Polycarbonate Lens Protector (For SRO)
1 x Valken Energy Battery - PEQ (7.4v LiPo 250mAh 25C)
1 x Arcturus AK-12 Stock
1 x Matrix SORDIN Headset For Helmet BK(Basic Ver., FG)
1 x HRG Adaptive Plate Carrier Full Set(BK)
1 x Valken Cylinder Dumbbell (6 pk, Dumbbell Shells)
1 x Laser Bore Sight Collimator
1 x Matrix Tactical Charging Handle For M4/M16 /AEG DE
1 x AD M300/600 Offset Mount (M-LOK & Keymod, BK)
1 x TMC STAGE Airsoft Training System Target Set (1 Host + 2 Slave)
1 x G style Precision 1.93'' High Mount For T1/T2 Red Dot
1 x ARES Bipod Mount for Keymod
2 x AD GBB/Propane Tank Silicone Oil (1.5WT, 30ml)
2 x AD Custom DD MK18 II 9.5'' BK (Marking Ver.)
3 x M. Receiver Rail for T.Marui M870 Tactical Shotgun
1 x Matrix QD Sling Swivel Adapter Mount (M-Lok)
1 x S&T Type 64 Handguard Rail
1 x HRG Adaptive Plate Carrier (500D Nylon, CB)
1 x Aqualung Survival Egress Air MKII Dummy
4 x 5KU Replacement Rubber Bullet for 40mm Cartridge (12pcs)
1 x AIMO Metal QD 25.4-30mm RDS Mount For AK Series
2 x Mark4 Style 3.5-10x40 M3 Scope(Full trades, Illuminated reticle)
1 x EmersonGear Linkage Reduction Metal Airgun Target
1 x Rail Switch Light (WHITE&RED)
1 x Dominator™ SLP QD 36'' Braided Hose
2 x S. Receiver Rail for T.Marui M870 Tactical Shotgun
1 x HRG Tactical Quick Release MOLLE Riggers Belt Multicam
1 x AD Custom M-LOK 3 slots rail
2 x AD Custom Polycarbonate Lens Protector (Dia. 28mm, For T1/T2 etc)
2 x ED Wire Guide Clip (M-LOK&Keymod, BK)
1 x Earmor M51 PTT (Kenwood 2 Pins)
1 x Emersongear Pmac Magzine Style Powerbank Case (DE)
2 x AD Custom Polycarbonate Lens Protector (Dia. 30mm, TLR1/T-Eagle)
1 x Compact Model Tool Kit
2 x HRG Medium-Sized Portable Pistol Bag (Tan)
1 x AD Custom CNC M4 Competition Trigger (Anodized, Red, Type A)
2 x Matrix MAP Stype Shotgun Handguard BK
2 x CYMA Adjustable Full Size M16 Precision Rifle Stock
1 x Cyma Ak Airsoft Rear Single Point Ambidextrous Sling Plate
2 x Lancer Tactical 28rd LT-28/Cyma M24 Sniper Rifle Magazine
1 x WiiTech MP7 (KSC, KWA, Umarex) Top Gas Version Power-up Loading
2 x Tactical MOLLE Safe Case For Phone&accessories (Tan)
1 x HRG Zip-On Backpack For JPC 2.0 (OD)
1 x 15cm Rail (bk)
1 x Pofung (Baofeng) Extended 3800mAh Li-ion Battery (A Pair)
1 x RA Steel CNC Trigger Set (for WE SCAR)
1 x Double Bell VSR-10 Bipod Rail
1 x Matrix SORDIN Headset For Helmet BK(Basic Ver., Tan)
1 x Double Bell/DBOYS Kar98k Metal Shells (5 pcs)
1 x Matrix CNC Aluminum Extended Magazine Release for Glock Red
2 x HM Brace Glock Kit Holster
1 x HRG Adaptive Plate Carrier (500D Nylon, BK)
3 x MOE Illumination Kit (BK)
1 x Adjustable Tactical Light Mount(1'' Diameter)
1 x Emersongear Chest Rig to Vest Adapter Kit CB
1 x DD Style Fixed Front&Rear sights (Marking edition)
1 x TD Stubby( BK )
1 x E&C 416 10.5'' Aluminum Outer Barrel (for AEG)
2 x Pro-Arms 130% Steel Recoil Rod Set For Umarex Glock 19 Gen3
2 x Dominator™ Tactical Fibre Optic Front-Sight Assembly Green
1 x ACM L3 NGAL Red Laser W/LED Flashlight (Aluminun Version, DE)
1 x Airsoft Target (2 Cardboard Target included)
2 x Ladder Rail Cover (Tan)
1 x PPS M870 Shotgun Steel Forend Wrench
1 x A&K STW Upper Metal Receiver (Systema PTW Compatible)
1 x FAST Style Tactical Riser Rail Mount BK
1 x Navy Seal VIP IR LED Light (Functional Ver., BK)
1 x Matrix M16/PRS Stock Screw/Spacer
1 x SHS Fiber Optic Front & Rear Sight Set for TM G17 GBB
2 x 5KU Cmore Mount For HiCapa Type 4 SV
1 x G Style Super Precision 1.93" Rifle Scope Mount BK
1 x AD GBBR/Grenade Silicone Oil (30WT, 15ml)
2 x AD M300/600 Offset Mount (M-LOK & Keymod, DE)
1 x Tac Latch Handles (BK)
1 x WiiTech BB Proof Lens, Trijicon MRO Sight (Tan)
2 x MFT Style Stock (BK)
1 x Gate Quantum Trigger (Matte Black)
1 x Earmor M32 MOD3 Tactical Headset (2022 Ver., CB)
1 x L4G24 NVG MOUNT Aluminum (BK)
1 x Valken Paintball Universal Tank Vest Pouch BK
1 x MI Style Keymod Rail (6061 T6 Aluminum, Steel Barrel Nut, 9'')
1 x APL Gen3 Style Pistol Flashlight (DE, 300 Lumens)
1 x SF M600DF LED Scout Light (1400 Lumens, DE)
1 x HRG Modular Assault MK3 Chest Rig With Fanny Pack(Multicam)
2 x HEL STAR 6 Gen 3 LED Helmet Light/Marker (DE, Red)
1 x Matrix 14CCW Threaded Mock Silencer Adapter for Tanaka M700
1 x Tactical UT Hot Button Remote Switch (Picatinay, 3.5mm plug, BK)
1 x RA steel CNC firing pin base (FOR WE SCAR H)
1 x AIM MP5 Low Mount
1 x Mad Hatter Classic Hat Red
1 x APL Compact Tactical Light (Tan, 200 Lumens)
2 x EmersomGear JPC/AVS 6x6 Side Amor Carrier Set BK
1 x Double Bell DB-90 P90 AEG (High-Speed Ver., QD Gearbox)
1 x 5KU Lightweight CNC Aluminum bolt for AAP-01 GBB Red
1 x Night Evolution Tactical Augmented Pressure Switch(2x3.5mm,BK)
1 x DD Style Retractable Stock (Marking ver. , BK)
1 x CQD Front Attachment Point
1 x Tactical UT Hot Button Remote Switch M-LOK, Flashlight, BK
1 x Rainier Arms Avalanche Knurled Style Charging Handle for AEG SV
1 x Pro-Arms Steel Sights w/Tritium For Umarex Glock 17 Gen4/19 Gen3
1 x EARMOR M12 EXFIL® Helmet Rails Adapter Attachment Kit
2 x Pofung (Baofeng) UV-5RIC Dual Band Two Way Radio
1 x Macross Robot Defence Force
1 x Diamond Doog Patch
1 x Tactical PMAG M4 Magazine Base Plate Red
1 x PTS EPM Internal Kit (Black)
1 x WinGun Break Top Major 3 1877 CO2 Powered Airsoft Revolver (Antique Black)
2 x AD Custom Polycarbonate Lens Protector (Dia. 26mm, For M300 etc)
1 x Cyma AK QD Side Mount
1 x AD Custom CNC M4 Competition Trigger (Anodized, BK, Type A)
1 x TLR-1 HL Style Flashlight (1000 Lumens, DE)
1 x Tactical MOLLE Safe Case For Phone&accessories (Multicam)
2 x JUNK Well M11 Gas Magazine (32 Rounds)
1 x TLR-1 HL Style Flashlight "REV2" (1000 Lumens, BK)
1 x Maple Leaf Hop-Up Chamber for 1911
1 x Double Bell/DBOYS Kar98k Strip Clip
1 x WELL 4401 Thread Adaptor (-14mm)
1 x CYMA 077 Foldable Stock (BK)
2 x FAB Style PTK-VTS Combo (DE)
1 x A&K Masada Outer Barrel Assembly
1 x EG LEAP Mount For T2/T1/REMO etc
2 x AK Rear Sight Rail Mount
1 x Well Pro 2800RD Magazine For WE23-X/Plus/H MINIGUN
1 x Manta Strobe (DE,Red)
1 x T-Eagle Tactical Riflescope ER 1.2-6X24 IR HK W/ Mount DE
2 x Thorntail2 Style SBR Light Mount For SF M300/M600 Rail Ver.
2 x CYMA 077 Hangguard (BK)
2 x FUSION Style ModButton Swtch&Mount For M300,M600 BK (3.5mm)
2 x Tactical UT Hot Button Remote Switch (Picatinay, 2.5mm plug, BK)
1 x Maple Leaf OHM AEG Tensioner Hard
2 x Bell ZEW Chrome/Tan Aluminum Slide Set For G Series17 (For TM,Be
1 x Element Valve Key BK
2 x HRG CP Style CPC Combat Vest RG
1 x ESHOOTER KESTREL V2 BASIC Airsoft ETU (Rear wired)
1 x CowCow 180% Nozzle Return Spring Hi-CAPA/1911
1 x Valken Thunder V2 CO2 Sound Simulation Grenade Core Set
1 x Wire Guide System (M-LOK & Keymod, DE, MA Type)
1 x HRG Tactical Seatback Molle Panel
1 x Matrix Steel AR15 Wrench
1 x WELL Pro MB03AE M700 Upgrade Version W/ Scope & Bipod
1 x Infinity 0.28g 3,500ct Airsoft BBs (Made in Taiwan)
1 x CowCow B01 Dynamic BlowBack Housing Hi-CAPA/1911 BK or SV
1 x G&P WA Reinforce Spring
2 x HRG Sniper Gun Bag/Mat (Tan)
1 x Tactical UT Hot Button Remote Switch M-LOK, Flashlight, DE
1 x Army Armament Full Metal R32 GBB Airsoft Pistol (DARKSTORM)
1 x 5KU QD Sling Plate With Swivel for M4/AR15 AEG
1 x WE M712 GBB Pistol W/ Stock (BK, KMT Marking Ver, Limited Set)
1 x G&P WA Bolt Buffer
1 x SMR 416 Offset Flashlight Mount (For M300,M600, BK)
1 x Valken Tactical 42 Double Rifle Tactical Gun Bag (BK)
1 x Bite Copypasta Patch
1 x Army Armament R615/R601-3D Enhanced Loading Nozzle
2 x SF M720V LED Tactical Flashlight (BK, 270 Lumens)
1 x MICH2002 Helmet Cover (Multicam)
1 x M-LOK & Keymod Offset Picatinny Rail Mount (M300/600 Ready,DE)
1 x Maple Leaf MR 50 degree AEG Hop-Up Rubber
1 x Matrix Glock Pistol Foam Case BK
1 x Apple Airsoft PKM Mount
1 x Dropwing Adaptive Light Mounts
1 x SHS Full Steel 15 Teeth Pion piston
1 x FAST FTC Style Magnifier Mount For G43 BK
2 x WELL MB02 VSR-10 G-SPEC Bolt Action Airsoft Sniper Rifle W/ Bipod&Scope
2 x HRG CP Style CPC Combat Vest CB
2 x Matrix CR123A 4pcs Battery Charger
2 x Offset Mount for M600C/M300A
1 x HM Flux Style Brace w/ holster set For Glock GBB Series
2 x ARES Flashlight / Laser system Mount for Keymod
2 x Army Armament Full Metal R31 Classic 1911 GBB Pistol BK
2 x GHK AKM / GKM-08 Low Muzzle Velocity Nozzle
2 x Eshooter Flare M BT Tracer/chrnograph Unit (RGB Rainbow color, Bluetooth Ver.)
2 x AGM 210 rds Magazine for Thompson M1A1 AEG (XXX Type)
3 x Earmor Headband Cover Multicam (2022 Ver. )
3 x Tactical Mini ModButton Pressure Remote Switch BK (3.5mm plug)
3 x Earmor M32 MOD4 Tactical Headset (2022 Ver., FG)
3 x Ztactical FBI Style Acoustic Headset (Motorola One Pin)
3 x MK18 Comp M2 Mount For Aimpoint M2/M3
1 x HRG Sniper Gun Bag/Mat (BK)
1 x VSG-S Grip For M-LOK/ Keymod BK
1 x SV Through the Heart Patch
1 x VFC AEG M4 Nozzle (Polymer)
1 x Double Bell M700 Gas Airsoft Rifle Real Wood Stock (Adjustable Velocity Ver.)
1 x ED Wire Guide Clip (M-LOK&Keymod, DE)
1 x EmersonGear CP Style Adaptive Vest -Heavy Version (MCTP 500D)
1 x 5KU Cmore Mount For HiCapa Type 4 BK
1 x Place Holder 15
1 x BD SMR Rail G Style Ring for Umarex/VFC 416
1 x E&C L96 Magazine
1 x EG ACOG Style 4x32 (Perfect Ver.,BK)
1 x Emerson Invisible Kneepad Gen3
3 x AD Custom Polycarbonate Lens Protector (Dia. 38mm, For MRO etc.)
1 x Emersongear Chest Rig to Vest Adapter Kit BK
1 x Emersongear Chest Rig to Vest Adapter Kit Multicam
1 x HRG JPC Style Plate Carrier (Tan)
1 x Ztactical TEA Style PTT (Motorola Single Pin)
1 x LMT Style MK18 Stock
1 x Cyma MP Style Conversion Kit (077A, For Cyma AK74 Series)
1 x SF M600C Mini Scout Light W/ Modbutton Switch (DE, 340 Lumens)
1 x Night Evolution HELMET LIGHT SET GEN 3 (BK)
1 x GoPro Mount for Airsoft Gun R.I.S Rail
1 x A&K Masada Rail Kit (DE)
3 x Army Armament G Series Extended Magwell
1 x HRG Modular Assault MK3 Chest Rig (CB)
1 x FAST Style Tactical Riser Rail Mount DE
1 x Steel Valve Lock For WA M4
1 x PPS M870 Magazine Tube Fixed Bar
1 x HRG Adaptive Chest Rig (Crye Precision Mulitcam)
1 x SF X400 Tactical LED Pistol Light w/ Red Laser DE
1 x Double Bell/DBOYS Kar 98K Replica Dummy Rounds
1 x GHK M4 Low Muzzle Velocity Nozzle
1 x A&K SVD High-Cap Magazine (180rds)
1 x No motivation Patch
1 x Sena Bonbon Vtuber Patch
1 x Double Bell SCAR-SC AEG Rifle (Full metal, QD Gearbox, BK, Two Magaznies Ver.)
1 x GL-CORE Style CP Combat Stock With Cheek Rest DE
1 x Army Armament 1911 Green Gas Magazine (28rds)
1 x 30mm L Mount for Red Dots / Rifle Scopes
1 x Army Armament Full Metal R32 GBB Airsoft Pistol (Tan)
1 x Modular Military Vest SRB Side Release Buckle (2pcs, DE)
1 x E&C MK18 RIS III SBR Airsoft Rifle AEG (Dark Earth, AD Custom Ver.)
1 x E&C EC-45 GBB Airsoft Pistol
1 x PTS Enhanced Sling Plate – Modular Gen 2 (ESP-M2) AEG
1 x E&C ODIN Style 9.5'' AEG (AD Custom Ver.)
1 x SF Style 4 Prong Flash Hider (CCW-14mm, Steel Ver.)
1 x Ztactical Combat Series PTT (Motorola Single Pin)
1 x 5KU 5 Position Stock Pipe/Buffer Tube for M4 / M16 AEG Series
1 x E&C M4 Aluminum Outer Barrel (for AEG)
1 x Multi-Angle Rotation ARC & EXFIL Rail Adapter Suspension for Earmor, Walker, & HL Series Headsets DE
1 x Airsoft Cardboard Target Paper (12pcs)
1 x Army Armament Full Metal R28 1911 Warrior GBB Airsoft Pistol BK
1 x HRG Tactical Molle Combat Belt Multicam
1 x Vector Optics Riser Mount For Frenzy/Docter Sight
1 x WeaponLink Backplane MOLLE Adapter
1 x Tactical UT Hot Button Remote Switch MLOK&Keymod, 2.5mm plug, BK
1 x Snow Wolf VSR-10 Magazine (Compatible with Double Bell)
1 x 5KU Limcat Speed Cat Aluminum Slide for TM Hicapa
1 x FMA 3 type for 25mm Webbing (BK)
1 x Detachable Swivel QD Sling Mount
1 x AD Custom Hicapa Adaptor For Odin Loader (Made in Canada!)
1 x HRG Laser-cut MOLLE Drop Leg/Shoulder Pad Platform (Tan)
1 x Tactical Mini ModButton Pressure Remote Switch BK (2.5mm plug)
1 x Steel QD Swivel (A)
1 x AD Custom Specter DR Gen 3 Polycarbonate Lens Protector (Clear l
1 x CYMA AK Contractor C107 Lower CNC Aluminum Airsoft Rail System
1 x CYMA AR15 Flip Up Front/Rear Sight
1 x PTS Enhanced Sling Plate – Modular Gen 2 (ESP-M2) GBBR
1 x G Style 13.5'' SMR MK16 M-LOK Rail BK
1 x NF Style 1-4x Compact Rifle Scope
$24,100.30