CALL US :416-298-3303

Shipping & Returns


General Warranty and Return Policy:


Last Updated: August 31st, 2019

Global Policies (applies to all category based policies):
  1. All sales are final, NO Refund. We only accept exchanges or store credit. If you have any questions for the products we sell, please give us a call, message us on social media, or email us.
  2. We only accept exchanges or store credits within 7 days since the product was purchased in store, or parcel was received by the end user/customer from online orders. The shipping cost of the product and the return shipping to be sent back to us will not be covered for exchange.
  3. If we deem a returned product has been abused by the end user as written within the individual policies below, we reserve the right to refuse repair, or exchange the product. We will not return the product back to the end user unless they pay for the shipping cost to be shipped back. Under this condition, IF we supplied a prepaid return shipping label to the customer earlier on, we may expect the end user to pay for the full price of the prepaid label as well.
  4. We do not guarantee perfect finishing and/or quality of the products we carry; we simply carry what the manufacturer offers us. Depending on the situation, we are capable of testing an airsoft gun before shipping out upon request.
  5. All photos on our website are purely for reference purposes only. Both the packaging and actual product may slightly differ from actuality due to slight changes per batch when procured from manufacturer and/or supplier.
  6. We do not guarantee that the original packaging/box of a product is free from dents or damage. We only guarantee that the product housed within the packaging is of working order and brand new in nature.
  7. All sales are final for products listed as clearance or junk. No warranty is provided under any circumstances whatsoever under said category. Please call or email us at support@airsoftdepot.ca for specific inquiries on clearance or junk items before purchase if unsure.
  8. All sales are also final for consumables and any battery products. Consumables are in regards to products such as (but not limited to) green gas, BBs, silicon oil/grease, and Thunder Bs.

Airsoft Guns:
  1. All airsoft gun sales are FINAL. We do not accept returns of an airsoft gun unless the gun itself is defective.
  2. All airsoft guns* carry a standard, 7 days warranty provided by Airsoft Depot Canada since the day the gun was purchased in store, or parcel was received by the end user/customer from online orders. We encourage customers to test the purchased airsoft gun as soon as possible and contact us within 48 hours of purchase. We only accept exchange for out-of-the-box defective airsoft gun products as long as a replacement of the same product is available. We can only provide a refund if a replacement cannot be provided. Please kindly give us up to 3 business days for a proper response.
  3. *Special instructions bolded or highlighted in red on certain product pages in the product descriptions may override the above rule under this (Airsoft Guns) category.
  4. Any sort of modifications done to the airsoft gun (during the warranty period) internally or externally would automatically void our warranty service. For example, painting your gun, upgrading the internals, or modifying the battery connectors to deans or vice versa with Tamiya connectors and ultimately frying your gun.
  5. Do not attempt to diagnose or repair an airsoft gun if you are faced with an issue/error from the airsoft gun itself. Stop all activity and use of the gun, and report the incident in detail to support@airsoftdepot.ca. Depending on situation and the severity of the matter, we will provide diagnosis and instructions on the issue and/or provide approval for the airsoft gun to be sent back for repair or exchange. Disassembling a newly received airsoft gun voids the warranty.
  6. Assuming the airsoft gun is deemed defective and approved for return to be exchanged or repaired, the end user customer must send it back in its original factory packaging (everything that originally came with the gun such as magazine, instructions booklet, clear plastic bag, etc). The customer is expected to wrap the packaging of the gun in completely opaque wrapping paper or garbage bag and seal well with tape. If certain conditions are met, we may instead provide a prepaid return shipping label and return shipping instructions via email.
  7. If an airsoft gun has been sent/shipped back to us under our approval during the warranty period, the cost of return shipping will be covered as a store credit (assuming a return shipping label was not provided). The store credit can be redeemed and used for future purchases on this website (airsoftdepot.ca). If the airsoft gun has been inspected, repaired, and/or replaced, we will cover the reshipping cost.
  8. If the airsoft gun has been deemed working and not defective upon inspection by our Techs, we will have you pay for the reshipping cost back to your shipping address. If a prepaid return shipping label has been provided with, we will also have you pay for said label as well. The same rule applies if the airsoft gun has been deemed damaged from customer abuse. Customer abuse happens when the end user attempts to repair, modify/tinker/take apart, upgrade the airsoft gun during the warranty period, screws it up, and provides false pretense in regards to the damage itself. Physical damage and mishandling, such as dropping the gun, using low quality Can-Tire/Walmart-tier BBs , or using the wrong rated battery (i.e. using high discharge rate battery on an airsoft gun that s not rated for it) will also count as customer abuse. Abused products do not qualify for any sort of refund or exchange.
  9. Manufacturer included "bonus items" such as, but not limited to cleaning rod, sample bb, bb loader, sling, battery, and charger, are not eligible for warranty. These "bonus items" are included AS IS and are included for testing purposes by the manufacturer. We do not guarantee the proper function of said "bonus items."

Scopes (including red dots):
  1. All scopes (except real steel scopes) are toy scopes, for Aisoft gaming ONLY, NOT for practical shooting
  2. We can not guarantee toy scopes work steel as well as real steel scopes
  3. We can not gurantee toy scopes adjustable as well as real steel scopes

Parts or Gear:
  1. A one-week warranty is only provided for out-of-the-box defective parts or gear products.
  2. We do not guarantee the fitting of the parts/scopes/gears. Please do research or ask up front.
  3. No returns or exchange for all BDUs, shirts, pants, goggles, helmets, and boots/shoes due to hygiene reasons unless it is reported "defective" within 48 hours of purchase. Please kindly do your own research, send us an email, or message us on Facebook for questions on sizing.

HRG Batteries and Chargers Extended Warranty Program
  1. We offer an extended warranty for HRG battery and charger products only of up to 30 days if purchased from Airsoft Depot Canada and its authorised retailers ONLY.
  2. Free one time exchange for defective out of the box items within 30 days of purchase or when parcel is received from Online Orders.
  3. Any signs of end user abuse such as intentional or unintentional damages are not covered by this Warranty Program and voided.
  4. Examples of abuse but not limited to would be damage caused from dropping it from the air, allowing it to be noticeably bent, dented or scraped, wrong connectors plugged or upside down, or allow it to be operated/charged in a bad environment (near a heat source, damp area).
  5. Customer is to send clear photos of 5~6 sides of the issues itself or a video of it for us to be inspect and approve the replacement.
  6. The Customer is only responsible for both shipping and return shipping if there is nothing wrong with the HRG battery and chargers themselves.
  7. Airsoft Depot Canada offers basic troubleshooting for all HRG batteries and chargers bought at authorized retailers via Online Support Center at: support@airsoftdepot.ca. Please give us up to 7 days for a proper response. Please and Thanks.

Continue
1 x Opsmen S18 Tactical Molle Pouch Tan
1 x HRG Drop Pouch/Fanny Pack For AVS JPC CPC (BK)
1 x HRG Drop Pouch/Fanny Pack For AVS JPC CPC (Multicam Black)
1 x HRG Drop Pouch/Fanny Pack For AVS JPC CPC (OD)
1 x Amomax Airsoft BB Portable Storage Pouch (3000 rds capacity)
1 x Emersongear 17cm*17cm Rescue Pouch (Multicam Black)
1 x AD Custom Polycarbonate Lens Protector (Eotech)
1 x ACOG Killflash (Marking Ver. ,BK)
1 x M3 screws x2 for RMR/SRO/Doc installation on Army Armament pistols
1 x AD Custom Polycarbonate Lens Protector (For SRO)
1 x AD Custom Polycarbonate Lens Protector (Dia. 28mm, For T1/T2 etc)
1 x AD Custom Specter DR Gen 3 Polycarbonate Lens Protector (Clear l
1 x ESHOOTER KESTREL V2 MOSFET FOR V2 GEARBOX (Bluetooth ready, Rear wired)
1 x Burst Avocado Programmable MOSFET For Airsoft AEG Rifles (Model: Ver V / Small Tamiya)
1 x ESHOOTER KESTREL V3 BASIC Airsoft ETU
1 x SHS New Type SR-25 Gear set
1 x SHS High Speed Double Sector Gear Set (Ver.3)
1 x SHS High Speed Double Sector Gear Set (Ver.2)
1 x A&K STW Lower Gearbox Assembly for STW Airsoft Training Rifles
1 x Motor Pinion Gear (O Shape)
1 x Modify Modular Gear Set 7mm Ver.2/Ver.3, Torque 21.6:1
1 x SHS Speed-Up Gear Set for V2/3 AEG GENIII (13:1, CL14006)
2 x SF Warden Barrel Extension (BK, 14mm CCW)
1 x MFT Style Stock (BK)
1 x DD Style Fixed Front&Rear sights (Marking edition)
2 x PTS Dead Air Sandman-L Barrel Extension BK
1 x Mini Handstop (M-LOK, DE)
1 x TAC QD Mock Suppressor (14mm-)
1 x BCM Gunfighter KAG 1913 (Rail, BK)
1 x CQD Front Attachment Point
1 x Wire Guide System (M-LOK & Keymod, DE, MA Type)
1 x PTS Enhanced Sling Plate – Modular Gen 2 (ESP-M2) GBBR
1 x Double Bell AK Metal Rear Sight
1 x E&C 416D Pistol Grip
2 x RSA Sling Mount (QD Version)
1 x VSG-S Grip For Rail (FG)
1 x Dominator™ Tactical Fibre Optic Front-Sight Assembly Green
1 x Army Pistol Thread Adapter (11mm CCW)
1 x Canada (Small, DE)
1 x HUSH XL Barrel Exension (14mm CCW W/Adapter)
2 x DD Style Retractable Stock (Marking ver. , DE)
1 x Keymod System GolfBall Pattern Short Grip (Silver)
2 x Wire Guide System (M-LOK & Keymod, BK, MA Type)
1 x PPS Silencer Adaptor For Well Sniper Rifle
1 x AFG 2 Grip (TAN)
2 x Matrix SL-K Style Stock (BK)
1 x Double Bell SCAR-H Stock (BK)
1 x Zenitco Style PK-6 Vertical Grip (Metal, Markings)
2 x Viper Style Stock (Milspec, DE)
1 x B5 Style Handstop Standard (M-LOK, DE)
2 x MP Style Quick Detachable Sling Mount (M-LOK, BK)
1 x PTS Enhanced Polymer Grip (EPG) AEG BK
3 x PTS Dead Air Sandman-L Tracer Unit BK
1 x PTS Dead Air Sandman-S Tracer Unit DE
1 x TD Stubby( BK )
1 x PTS Dead Air Sandman-K Tracer Unit BK
1 x BCM Gunfighter KAG (M-LOK, BK)
1 x MBUS Pro Metal Front/Rear Sights (With marking)
2 x MP Style M-LOK Rail Cover DE
1 x 5KU Spitfire Flame Tracer 14mm CCW
1 x FMA TD Grip For M-LOK SYS BK
1 x IMP M-LOK & Keymod Barrier Hand Stop DE
1 x Eshooter Flare M Tracer Unit ( Rainbow color, RGB color )
1 x PTS Enhanced Polymer Grip - Compact (EPG-C) AEG OD
2 x 5KU AK Folding Stock Pipe Adapter
1 x RVG Grip (BK)
2 x Detachable Swivel QD Sling Mount
2 x SF Warden Barrel extension (DE, 14mm CCW)
1 x Bipod Grip
2 x Gun Fighter Stock MOD0 BK
1 x RVG Grip (Foliage Green)
1 x Eshooter Flare Mono Tracer Unit
2 x PTS Enhanced Sling Plate – Modular Gen 2 (ESP-M2) AEG
1 x B5 Style Handstop Standard (M-LOK, BK)
2 x Japari Coin
2 x PTS Dead Air Sandman-S Barrel Extension BK
1 x ASP Sling Attachment Point (GBBR)
1 x 5KU M4 AEG Picatinny Rail Stock Base Adapter
2 x PTS Enhanced Polymer Stock (EPS) Tan
1 x E&C 416 A5 Pistol Grip
2 x Gun Fighter Stock MOD0 DE
1 x AFG 2 Grip (BLACK)
1 x IR Gold Double Side Patch
1 x Blood Type PVC Patch(AB, OD)
1 x ASG Ultrair Players' Choice Airsoft Green Gas (Qty: 12 Cans)
1 x Be a Friend Among Friends Portrait
1 x Ladder Rail Cover(BK)
1 x Rhodesian Poster
1 x Larue style index clip(BK, 72 pcs, with handstop )
1 x A&K M249 Para Stock
1 x 5KU SS-8 Style with Folding Stock for GHK/LCT/CYMA /DBOYS AK Series
1 x E&C G17 Slide (Full metal, engraved marking)
1 x Maple Leaf Hop-up chamber for WE/TM G-Series
1 x WiiTech G Series 17 Series (T.Marui) CNC Hardened Steel Hammer
1 x CowCow AAP-01 Steel Trigger Lever
1 x Armorer Works VX/G-Series Nozzle Assembly RMR/MOS Ver.
1 x 5KU Lightweight CNC Aluminum bolt for AAP-01 GBB Gold
1 x Wii Tech Glock (T.Marui) CNC Steel Enhanced Sear
1 x CowCow AAP-01 150% Nozzle Return Spring
1 x AD Custom TTI Style Glock Magwell (For Gen3/Gen4)
1 x Army Armament G Series Extended Magwell
1 x CYMA 077 Foldable Stock (BK)
1 x Bell G17 Screw Set (For G Series GBB Pistol)
1 x Pro-Arms Steel Sights w/Tritium For Umarex Glock 17 Gen4/19 Gen3
1 x E&C Trigger Unit for G-Series GBB Pistol
1 x 5KU Lightweight CNC Aluminum bolt for AAP-01 GBB Blue
1 x Arcturus AK-12 Stock
1 x HM Flux Style Brace w/ holster set For Glock GBB Series
1 x HM Brace Glock Kit Holster
1 x Double Bell SCAR-L Stock (Tan)
1 x CYMA Adjustable Full Size M16 Precision Rifle Stock
1 x Bell ZEW Chrome/Tan Aluminum Slide Set For G Series17 (For TM,Be
1 x Bell ZEW Chrome CNC Aluminum Slide Set For G Series 17 (For TM,B
1 x CowCow AAP-01 200% Nozzle Return Spring
1 x E&C G Series Loading Nozzle (For E&C/TM G18)
1 x DD Style Retractable Stock (Marking ver. , BK)
1 x G17 Complete Nozzle Housing Assembly (For WE,TM,E&C etc.)
1 x CowCow AAP-01 Enhanced Complete Nozzle Set
1 x Matrix CNC Aluminum Extended Magazine Release for Glock BK
1 x WiiTech Glock (T.Marui) CNC Steel Knocker
1 x CowCow AAP-01 Trigger TypeA Silver
1 x 5KU Zenitco PT-1 Style AK Side Folding Stock Gen 2
1 x 5KU Lightweight CNC Aluminum bolt for AAP-01 GBB Red
1 x 5KU Picatinny Rail Stock Base for LCT GHK WE CYMA WELL Double Bell Airosft AK Series
1 x Matrix CNC Aluminum Extended Magazine Release for Glock Red
1 x PTS Enhanced Polymer Stock (EPS) BK
1 x Matrix CNC Aluminum Extended Magazine Release for Glock Gold
1 x 5KU Zenitco PT-1 Style AK Side Folding Stock
1 x SBA3 Style Stabilizing Brace Stock For M4 Series BK
1 x 5KU Picatinny M1913 Rail Stock Adapter for CYMA MP5K AEG
1 x Double Bell 416D Stock
1 x CowCow SS G Fire Pin Lock For TM & Umarex G-Series, AAP01 & WE
1 x Pro-Arms 130% Steel Recoil Rod Set For Umarex Glock 19 Gen3
1 x Double Bell M9 Metal Parts Set (KSC spec)
1 x Macross Robot Defence Force
1 x DA EHANCED MUZZLE BRAKE(-14mm) BK
1 x Double Bell M-Lok Sling Adapter
1 x Steel QD Swivel (A)
1 x BCM Style Quick Detachable Sling Mount (M-LOK,DE)
1 x DA EHANCED MUZZLE BRAKE(-14mm) DE
1 x PTS Dead Air Sandman-K Barrel Extension BK
1 x PTS Dead Air Sandman-K Tracer Unit DE
1 x PTS Dead Air Sandman-S Barrel Extension DE
1 x Bell M9 Rubber Parts Set (For KSC M9 Series GBB Pistol)
1 x RSA Sling Mount
1 x Cyma Ak Airsoft Rear Single Point Ambidextrous Sling Plate
1 x Matrix QD Sling Swivel Adapter Mount (M-Lok)
1 x DD Style Front Sling Point (Type B, Marking ver.)
1 x CYMA P90 70 rds Mid-Cap Magazine
1 x Snow Wolf PPSH Full Metal Hicap Magazine
1 x Snow Wolf M3A1 Hi-Cap Magazine (520 rds)
1 x A&K 30 rds Magazine for M1 Garand Airsoft AEG (Box Set of 5 pcs)
1 x AGM 210 rds Magazine for Thompson M1A1 AEG (XXX Type)
1 x Double Bell SCAR-H 90rds Mid-cap Magazine BK
1 x A&K/E&C M110 190 rds midcap magazine
1 x A&K 30 rds Magazine for M1 Garand Airsoft AEG
1 x E&C 417 Polymer Mid-cap Magazine 110 BBS
1 x Double Bell VSR-10 Magazine
1 x Classic Army M24 25rds Magazine
1 x Well MB4404, 4405, 4410, 4411, 4412, 4413,4416 Magazine
1 x Lancer Tactical 28rd LT-28/Cyma M24 Sniper Rifle Magazine
1 x S&T Spare Magazine for Kar98K/M1903A1 Spring Rifle (25 rds)
1 x Double Bell/DBOYS Kar98k Strip Clip
1 x Double Bell/DBOYS Kar98k Metal Shells (5 pcs)
1 x A&K M24 Magazine (15 rds)
$8,643.46