CALL US :416-298-3303

Shipping & Returns


General Warranty and Return Policy:


Last Updated: August 31st, 2019

Global Policies (applies to all category based policies):
  1. All sales are final, NO Refund. We only accept exchanges or store credit. If you have any questions for the products we sell, please give us a call, message us on social media, or email us.
  2. We only accept exchanges or store credits within 7 days since the product was purchased in store, or parcel was received by the end user/customer from online orders. The shipping cost of the product and the return shipping to be sent back to us will not be covered for exchange.
  3. If we deem a returned product has been abused by the end user as written within the individual policies below, we reserve the right to refuse repair, or exchange the product. We will not return the product back to the end user unless they pay for the shipping cost to be shipped back. Under this condition, IF we supplied a prepaid return shipping label to the customer earlier on, we may expect the end user to pay for the full price of the prepaid label as well.
  4. We do not guarantee perfect finishing and/or quality of the products we carry; we simply carry what the manufacturer offers us. Depending on the situation, we are capable of testing an airsoft gun before shipping out upon request.
  5. All photos on our website are purely for reference purposes only. Both the packaging and actual product may slightly differ from actuality due to slight changes per batch when procured from manufacturer and/or supplier.
  6. We do not guarantee that the original packaging/box of a product is free from dents or damage. We only guarantee that the product housed within the packaging is of working order and brand new in nature.
  7. All sales are final for products listed as clearance or junk. No warranty is provided under any circumstances whatsoever under said category. Please call or email us at support@airsoftdepot.ca for specific inquiries on clearance or junk items before purchase if unsure.
  8. All sales are also final for consumables and any battery products. Consumables are in regards to products such as (but not limited to) green gas, BBs, silicon oil/grease, and Thunder Bs.

Airsoft Guns:
  1. All airsoft gun sales are FINAL. We do not accept returns of an airsoft gun unless the gun itself is defective.
  2. All airsoft guns* carry a standard, 7 days warranty provided by Airsoft Depot Canada since the day the gun was purchased in store, or parcel was received by the end user/customer from online orders. We encourage customers to test the purchased airsoft gun as soon as possible and contact us within 48 hours of purchase. We only accept exchange for out-of-the-box defective airsoft gun products as long as a replacement of the same product is available. We can only provide a refund if a replacement cannot be provided. Please kindly give us up to 3 business days for a proper response.
  3. *Special instructions bolded or highlighted in red on certain product pages in the product descriptions may override the above rule under this (Airsoft Guns) category.
  4. Any sort of modifications done to the airsoft gun (during the warranty period) internally or externally would automatically void our warranty service. For example, painting your gun, upgrading the internals, or modifying the battery connectors to deans or vice versa with Tamiya connectors and ultimately frying your gun.
  5. Do not attempt to diagnose or repair an airsoft gun if you are faced with an issue/error from the airsoft gun itself. Stop all activity and use of the gun, and report the incident in detail to support@airsoftdepot.ca. Depending on situation and the severity of the matter, we will provide diagnosis and instructions on the issue and/or provide approval for the airsoft gun to be sent back for repair or exchange. Disassembling a newly received airsoft gun voids the warranty.
  6. Assuming the airsoft gun is deemed defective and approved for return to be exchanged or repaired, the end user customer must send it back in its original factory packaging (everything that originally came with the gun such as magazine, instructions booklet, clear plastic bag, etc). The customer is expected to wrap the packaging of the gun in completely opaque wrapping paper or garbage bag and seal well with tape. If certain conditions are met, we may instead provide a prepaid return shipping label and return shipping instructions via email.
  7. If an airsoft gun has been sent/shipped back to us under our approval during the warranty period, the cost of return shipping will be covered as a store credit (assuming a return shipping label was not provided). The store credit can be redeemed and used for future purchases on this website (airsoftdepot.ca). If the airsoft gun has been inspected, repaired, and/or replaced, we will cover the reshipping cost.
  8. If the airsoft gun has been deemed working and not defective upon inspection by our Techs, we will have you pay for the reshipping cost back to your shipping address. If a prepaid return shipping label has been provided with, we will also have you pay for said label as well. The same rule applies if the airsoft gun has been deemed damaged from customer abuse. Customer abuse happens when the end user attempts to repair, modify/tinker/take apart, upgrade the airsoft gun during the warranty period, screws it up, and provides false pretense in regards to the damage itself. Physical damage and mishandling, such as dropping the gun, using low quality Can-Tire/Walmart-tier BBs , or using the wrong rated battery (i.e. using high discharge rate battery on an airsoft gun that s not rated for it) will also count as customer abuse. Abused products do not qualify for any sort of refund or exchange.
  9. Manufacturer included "bonus items" such as, but not limited to cleaning rod, sample bb, bb loader, sling, battery, and charger, are not eligible for warranty. These "bonus items" are included AS IS and are included for testing purposes by the manufacturer. We do not guarantee the proper function of said "bonus items."

Scopes (including red dots):
  1. All scopes (except real steel scopes) are toy scopes, for Aisoft gaming ONLY, NOT for practical shooting
  2. We can not guarantee toy scopes work steel as well as real steel scopes
  3. We can not gurantee toy scopes adjustable as well as real steel scopes

Parts or Gear:
  1. A one-week warranty is only provided for out-of-the-box defective parts or gear products.
  2. We do not guarantee the fitting of the parts/scopes/gears. Please do research or ask up front.
  3. No returns or exchange for all BDUs, shirts, pants, goggles, helmets, and boots/shoes due to hygiene reasons unless it is reported "defective" within 48 hours of purchase. Please kindly do your own research, send us an email, or message us on Facebook for questions on sizing.

HRG Batteries and Chargers Extended Warranty Program
  1. We offer an extended warranty for HRG battery and charger products only of up to 30 days if purchased from Airsoft Depot Canada and its authorised retailers ONLY.
  2. Free one time exchange for defective out of the box items within 30 days of purchase or when parcel is received from Online Orders.
  3. Any signs of end user abuse such as intentional or unintentional damages are not covered by this Warranty Program and voided.
  4. Examples of abuse but not limited to would be damage caused from dropping it from the air, allowing it to be noticeably bent, dented or scraped, wrong connectors plugged or upside down, or allow it to be operated/charged in a bad environment (near a heat source, damp area).
  5. Customer is to send clear photos of 5~6 sides of the issues itself or a video of it for us to be inspect and approve the replacement.
  6. The Customer is only responsible for both shipping and return shipping if there is nothing wrong with the HRG battery and chargers themselves.
  7. Airsoft Depot Canada offers basic troubleshooting for all HRG batteries and chargers bought at authorized retailers via Online Support Center at: support@airsoftdepot.ca. Please give us up to 7 days for a proper response. Please and Thanks.

Continue
1 x M10 Style Fission Scope Mounts
1 x G Style Super Precision 1.93" Rifle Scope Mount DE
1 x FAST LPVO Scope Mount 30mm Scope Rail Mount - BK
1 x Adjustable Tactical Light Mount(1'' Diameter)
1 x Fast LPVO Mount With RMR/T1/T2 Offset Mount
1 x FAST Style Micro Mount AP T1/T2 Red Dot Riser BK
1 x Army Staccato RMR Mounting Plate
1 x Earmor M32 MOD4 Tactical Headset (2022 Ver., FG)
1 x GG Lerna Style Mount Kit For Eotech
1 x Tac-Sky MTEK Helmet Mount For COMTAC BK
1 x Multi-Angle Rotation ARC & EXFIL Rail Adapter Suspension for Earmor, Walker, & HL Series Headsets DE
1 x Dominator™ 62/3000 HPA Aluminium Tank
1 x FMA One Oclock Offset Mount (DE)
1 x G style Precision 1.93'' High Mount For MRO Red Dot
1 x EARMOR M12 EXFIL® Helmet Rails Adapter Attachment Kit
1 x Tac-Sky RAC PTT BK (Kenwood 2 Pin)
1 x Classic Army Metal Mount Base For M14 Series
1 x FAST FTC Style Magnifier Mount For G43 BK
1 x Dropwing Adaptive Light Mounts
1 x GG Style Forklift Mount Kit Eotech/Rail DE
1 x Tac-Sky PRC-148/152/163 Dummy Antenna
1 x CD LCS MK1 M-LOK Switch Mount
1 x AK Rear Sight Rail Mount
1 x MI AK Tactical Railed Scope Mount (BK)
1 x AIMO Metal QD 25.4-30mm RDS Mount For AK Series
1 x 5KU Aimpoint Carbon Mount (Bllack, MARUI HI-CAPA)
1 x G style Precision 1.93'' High Mount For T1/T2 Red Dot
1 x Valken Tank Kits/Parts - SLP QD Air Rig 42 Hose Only
1 x HL Style Headset W/ Noise Cancelling/Sound Pickup FG
1 x AD M300/600 Offset Mount (M-LOK & Keymod, DE)
1 x GG Style Forklift Mount Kit T1/T2 DE
1 x Earmor M51 PTT (Kenwood 2 Pins)
1 x Tac-Sky AN/PRC152 Radio Military Harris Case W/ 6 Pins U94 PTT
1 x Earmor M32 MOD3 Tactical Headset (2022 Ver., CB)
1 x EARMOR M11-Peltor ARC Helmet Rails Adapter Attachment Kit
1 x FAST Style Tactical Riser Rail Mount DE
1 x FAST Style Tactical Riser Rail Mount BK
1 x FUSION Style LightWing Adapter-Right BK
1 x Earmor S03 Silicone Gel Earmuffs Headset Accessories for M31/M32/M31H/M32H Headset
1 x Valken Paintball Universal Tank Vest Pouch BK
1 x HL Style Headset W/ Noise Cancelling/Sound Pickup For Helmet FG
1 x Multi-Angle Rotation ARC & EXFIL Rail Adapter Suspension for Earmor, Walker, & HL Series Headsets BK
1 x EG LEAP Tactical 1.93'' Mount for Aimpont T1/T2
1 x EARMOR M11 ARC Helmet Rails Adapter Attachment Kit
1 x Ztactical TEA Style PTT (Motorola Single Pin)
1 x 5KU Cmore Mount For HiCapa Type 4 SV
1 x Double Bell G Series Competition Upgrade Kit
1 x Dominator™ 68/4500 HPA Carbon Tank
1 x 5KU Cmore Mount For HiCapa Type 4 BK
1 x Earmor M32H MOD4 Headset for FAST Helmets (2022 Ver., GY)
1 x Ztactical Combat Series PTT (Motorola Single Pin)
1 x Armorer Works HX Sight Mount Kit
1 x 5KU AK Scope Mount For T1/T2 Micro Red-dot
1 x CQB Russian HPA Valve For TM GBB Pistol & Rifle
1 x FMA Tactical Plastic Case (For pistol, Night Vision, Camera etc.)
1 x HRS PEQ-15 Class I IR Laser Aiming Device (DE)
1 x UT AX Button Switch For Aiming Device (BK, 3.5mm Plug)
1 x UT AX Button Switch For Aiming Device (DE, 2.5mm Plug)
1 x HRG Sniper Gun Bag/Mat (Tan)
1 x Tactical UT Hot Button Remote Switch (Picatinay, 3.5mm plug, BK)
1 x Wire Guide System (M-LOK & Keymod, BK, MA Type)
1 x PVS-14 Weapon Mount QuickConnect Rail Mount Adapter
1 x Wosport Urban War Rifle Bag
1 x FMA LAB PEQ-NGAL LED Light + IR Red Laser DE
1 x Tactical MOLLE Safe Case For Phone&accessories (Tan)
1 x ET OGL Aiming Device(Red&IR Laser&LED)(Aluminum, BK)
1 x UT AX Button Dual Switch For Aiming Device (BK,SF&3.5mm Plug)
1 x Sotac Remote Dual Pressure Switch Augmented Pressure Double (SF&Crane plug)
1 x Matrix Glock Pistol Foam Case BK
1 x FMA Remote Pressure Switch for Laser Devices (Style: Crane Plug / Black)
1 x Raid X Style Red/IR Laser Aiming Device DE
1 x ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (DE)
1 x Picatinny WireGuide System Cable Management Clip
1 x ET OGL Aiming Device(Red&IR Laser&LED)(Aluminum, DE)
1 x Matrix SORDIN Headset For Helmet BK(Basic Ver., FG)
1 x HL Style Headset W/ Noise Cancelling/Sound Pickup PINK
1 x PPS M870 Steel Right/Left Fork
1 x RA steel CNC firing pin (FOR WE SCAR H)
1 x RA steel CNC firing pin base (FOR WE SCAR H)
1 x Steel Valve Lock For WA M4
1 x Valken Tactical Thunder V Fire Lever
1 x Mad Hatter Classic Hat Red
1 x GHK M4 Low Muzzle Velocity Nozzle
1 x RA steel CNC trigger assembly (FOR WE SCARH)
1 x WiiTech Enhanced Loading Nozzle Assembly for WA
1 x CNC Steel Sear( For WA )
1 x Double Bell Bolt Set for 98K Shell Ejecting Rifle (Spring Ver.)
1 x Double Bell Bolt Set for 98K Shell Ejecting Rifle (Gas Ver.)
1 x Legion Baseball Cap (BK, Gold)
1 x G&P WA Reinforce Spring
1 x ASG Storm Apocalypse Grenade (BK)
1 x ASP Sling Attachment Point (GBBR)
1 x PTS Enhanced Sling Plate – Modular Gen 2 (ESP-M2) GBBR
1 x GHK AKM / GKM-08 Low Muzzle Velocity Nozzle
1 x M84 Flashbang Grenade Dummy/Light
1 x PPS M870 Magazine Tube Fixed Bar
1 x 5KU Replacement Rubber Bullet for 40mm Cartridge (12pcs)
$5,445.25