CALL US :416-298-3303

Shipping & Returns


General Warranty and Return Policy:


Last Updated: August 31st, 2019

Global Policies (applies to all category based policies):
  1. All sales are final, NO Refund. We only accept exchanges or store credit. If you have any questions for the products we sell, please give us a call, message us on social media, or email us.
  2. We only accept exchanges or store credits within 7 days since the product was purchased in store, or parcel was received by the end user/customer from online orders. The shipping cost of the product and the return shipping to be sent back to us will not be covered for exchange.
  3. If we deem a returned product has been abused by the end user as written within the individual policies below, we reserve the right to refuse repair, or exchange the product. We will not return the product back to the end user unless they pay for the shipping cost to be shipped back. Under this condition, IF we supplied a prepaid return shipping label to the customer earlier on, we may expect the end user to pay for the full price of the prepaid label as well.
  4. We do not guarantee perfect finishing and/or quality of the products we carry; we simply carry what the manufacturer offers us. Depending on the situation, we are capable of testing an airsoft gun before shipping out upon request.
  5. All photos on our website are purely for reference purposes only. Both the packaging and actual product may slightly differ from actuality due to slight changes per batch when procured from manufacturer and/or supplier.
  6. We do not guarantee that the original packaging/box of a product is free from dents or damage. We only guarantee that the product housed within the packaging is of working order and brand new in nature.
  7. All sales are final for products listed as clearance or junk. No warranty is provided under any circumstances whatsoever under said category. Please call or email us at support@airsoftdepot.ca for specific inquiries on clearance or junk items before purchase if unsure.
  8. All sales are also final for consumables and any battery products. Consumables are in regards to products such as (but not limited to) green gas, BBs, silicon oil/grease, and Thunder Bs.

Airsoft Guns:
  1. All airsoft gun sales are FINAL. We do not accept returns of an airsoft gun unless the gun itself is defective.
  2. All airsoft guns* carry a standard, 7 days warranty provided by Airsoft Depot Canada since the day the gun was purchased in store, or parcel was received by the end user/customer from online orders. We encourage customers to test the purchased airsoft gun as soon as possible and contact us within 48 hours of purchase. We only accept exchange for out-of-the-box defective airsoft gun products as long as a replacement of the same product is available. We can only provide a refund if a replacement cannot be provided. Please kindly give us up to 3 business days for a proper response.
  3. *Special instructions bolded or highlighted in red on certain product pages in the product descriptions may override the above rule under this (Airsoft Guns) category.
  4. Any sort of modifications done to the airsoft gun (during the warranty period) internally or externally would automatically void our warranty service. For example, painting your gun, upgrading the internals, or modifying the battery connectors to deans or vice versa with Tamiya connectors and ultimately frying your gun.
  5. Do not attempt to diagnose or repair an airsoft gun if you are faced with an issue/error from the airsoft gun itself. Stop all activity and use of the gun, and report the incident in detail to support@airsoftdepot.ca. Depending on situation and the severity of the matter, we will provide diagnosis and instructions on the issue and/or provide approval for the airsoft gun to be sent back for repair or exchange. Disassembling a newly received airsoft gun voids the warranty.
  6. Assuming the airsoft gun is deemed defective and approved for return to be exchanged or repaired, the end user customer must send it back in its original factory packaging (everything that originally came with the gun such as magazine, instructions booklet, clear plastic bag, etc). The customer is expected to wrap the packaging of the gun in completely opaque wrapping paper or garbage bag and seal well with tape. If certain conditions are met, we may instead provide a prepaid return shipping label and return shipping instructions via email.
  7. If an airsoft gun has been sent/shipped back to us under our approval during the warranty period, the cost of return shipping will be covered as a store credit (assuming a return shipping label was not provided). The store credit can be redeemed and used for future purchases on this website (airsoftdepot.ca). If the airsoft gun has been inspected, repaired, and/or replaced, we will cover the reshipping cost.
  8. If the airsoft gun has been deemed working and not defective upon inspection by our Techs, we will have you pay for the reshipping cost back to your shipping address. If a prepaid return shipping label has been provided with, we will also have you pay for said label as well. The same rule applies if the airsoft gun has been deemed damaged from customer abuse. Customer abuse happens when the end user attempts to repair, modify/tinker/take apart, upgrade the airsoft gun during the warranty period, screws it up, and provides false pretense in regards to the damage itself. Physical damage and mishandling, such as dropping the gun, using low quality Can-Tire/Walmart-tier BBs , or using the wrong rated battery (i.e. using high discharge rate battery on an airsoft gun that s not rated for it) will also count as customer abuse. Abused products do not qualify for any sort of refund or exchange.
  9. Manufacturer included "bonus items" such as, but not limited to cleaning rod, sample bb, bb loader, sling, battery, and charger, are not eligible for warranty. These "bonus items" are included AS IS and are included for testing purposes by the manufacturer. We do not guarantee the proper function of said "bonus items."

Scopes (including red dots):
  1. All scopes (except real steel scopes) are toy scopes, for Aisoft gaming ONLY, NOT for practical shooting
  2. We can not guarantee toy scopes work steel as well as real steel scopes
  3. We can not gurantee toy scopes adjustable as well as real steel scopes

Parts or Gear:
  1. A one-week warranty is only provided for out-of-the-box defective parts or gear products.
  2. We do not guarantee the fitting of the parts/scopes/gears. Please do research or ask up front.
  3. No returns or exchange for all BDUs, shirts, pants, goggles, helmets, and boots/shoes due to hygiene reasons unless it is reported "defective" within 48 hours of purchase. Please kindly do your own research, send us an email, or message us on Facebook for questions on sizing.

HRG Batteries and Chargers Extended Warranty Program
  1. We offer an extended warranty for HRG battery and charger products only of up to 30 days if purchased from Airsoft Depot Canada and its authorised retailers ONLY.
  2. Free one time exchange for defective out of the box items within 30 days of purchase or when parcel is received from Online Orders.
  3. Any signs of end user abuse such as intentional or unintentional damages are not covered by this Warranty Program and voided.
  4. Examples of abuse but not limited to would be damage caused from dropping it from the air, allowing it to be noticeably bent, dented or scraped, wrong connectors plugged or upside down, or allow it to be operated/charged in a bad environment (near a heat source, damp area).
  5. Customer is to send clear photos of 5~6 sides of the issues itself or a video of it for us to be inspect and approve the replacement.
  6. The Customer is only responsible for both shipping and return shipping if there is nothing wrong with the HRG battery and chargers themselves.
  7. Airsoft Depot Canada offers basic troubleshooting for all HRG batteries and chargers bought at authorized retailers via Online Support Center at: support@airsoftdepot.ca. Please give us up to 7 days for a proper response. Please and Thanks.

Continue
1 x SHS Ver3 High Speed Motor
1 x SHS Ver2 High Torque Motor
1 x Tienly Infinity GT-35000 Motor Long Type
1 x SHS Ver2 Super Cool High Torque Motor
2 x Motor Pinion Gear (O Shape)
1 x SHS Ver2 High Speed Motor
1 x Motor Screw Set (4pcs)
1 x A&K STW Motor for Systema PTW type M4 Series Airsoft AEG
1 x Classic Army Metal Mount Base For M14 Series
1 x Cyma AK QD Side Mount
1 x EG LEAP Mount For T2/T1/REMO etc
1 x FMA One Oclock Offset Mount (DE)
1 x AD Custom 2011 Hicapa RMR Mount Base (TM, JAG ARMS, Army etc)
1 x FUSION Style LightWing Adapter-Right BK
1 x FAST Style Tactical Riser Rail Mount BK
1 x ARES Bipod Mount for Keymod
1 x EG LEAP Tactical 1.93'' Mount for Aimpont T1/T2
1 x AIM MP5 Low Mount
1 x AD M300/600 Offset Mount (M-LOK & Keymod, DE)
1 x FAST Style Micro Mount AP T1/T2 Red Dot Riser DE
1 x Dropwing Adaptive Light Mounts
1 x AK Rear Sight Rail Mount
1 x GG Style Forklift Mount Kit Eotech/Rail DE
1 x AD Custom P320 RMR/SRO/Doc sight Mount Plate
1 x FAST FTC Style Magnifier Mount For G43 BK
1 x G Style Super Precision 1.93" Rifle Scope Mount BK
1 x 30mm L Mount for Red Dots / Rifle Scopes
1 x GG Style Forklift Mount Kit T1/T2 DE
1 x 5KU Cmore Mount For HiCapa Type 4 BK
1 x 45° RMR Mount For Geissel 1.93 Scope Mount
1 x Double Bell G Series Competition Upgrade Kit
1 x M-LOK & Keymod Offset Picatinny Rail Mount (M300/600 Ready,DE)
1 x 5KU AK Scope Mount For T1/T2 Micro Red-dot
1 x FAST Style Micro Mount AP T1/T2 Red Dot Riser BK
1 x FAST LPVO Scope Mount 30mm Scope Rail Mount - BK
1 x ARES Flashlight / Laser system Mount for Keymod
1 x GG Lerna Style Mount Kit For Eotech
1 x G Style Super Precision 1.93" Rifle Scope Mount DE
1 x G style Precision 1.93'' High Mount For MRO Red Dot
1 x G style Precision 1.93'' High Mount For T1/T2 Red Dot
1 x MI AK Tactical Railed Scope Mount (BK)
1 x Adjustable Tactical Light Mount(1'' Diameter)
1 x MK18 Comp M2 Mount For Aimpoint M2/M3
1 x 5KU Cmore Mount For HiCapa Type 4 SV
1 x 5KU Aluminum Custom Optic Rail Mount for Hi-Capa Series Airsoft Pistols (BK)
1 x M10 Style Fission Scope Mounts
1 x Armorer Works HX Sight Mount Kit
1 x AIMO Metal QD 25.4-30mm RDS Mount For AK Series
1 x GG Style Forklift Mount Kit T1/T2 BK
1 x FAST Style Tactical Riser Rail Mount DE
1 x Night-Evolution Low Drag Mount for T1 and T2 (AO1780)
1 x M16 M4 AR15 Carry Handle 20mm Weaver Rail
1 x 5KU Aimpoint Carbon Mount (Bllack, MARUI HI-CAPA)
1 x AD M300/600 Offset Mount (M-LOK & Keymod, BK)
1 x Fast LPVO Mount With RMR/T1/T2 Offset Mount
1 x M-LOK SCOUT LIGHT PRO M-LOK MOUNT For Surefire Scout Light
1 x CD LCS MK1 M-LOK Switch Mount
2 x SHS Speed-Up Gear Set for V2/3 AEG GENIII (13:1, CL14006)
1 x Modify Safety Catch for Marui M16 series
1 x SHS Spring Set Version2
1 x Modify Cut Off Lever Ver.2 (Steel)
1 x E&C High Capacity Silver Wire Ver. 2 Rear Wire Assembly
1 x SHS T-shape Connector Wire Set
1 x SHS Speed-Up Gear Set for V2/3 AEG GENIII (18:1, CL14002)
2 x Cyma AK Metal Selector Lever & Safety Set
1 x WE-TECH X3400 Airsoft Shooting BB Chronograph (Green)
1 x SHS Nylon Tappet Plate (Version 3)
1 x Modify Dean Ultra Plug (T-Shape Connector) new
1 x Modify Modular Gear Set 7mm Ver.2/Ver.3, Torque 21.6:1
1 x VFC MP7 AEG Original Tappet Plate
1 x Modify Modular Gear Set 7mm Ver.2/Ver.3, Speed 16.32:1
1 x Modify Tappet Ver. 3
3 x E&C Ver. 2 Cylinder Complete Upgrade Set
1 x SHS Shim Set
1 x Gear Box Switch For Version 2 Gear Box
1 x Large Tamiya To Small Adaptor
1 x Double Bell Ver. 3 Wire Assembly
1 x SHS Nylon Tappet Plate (Version 2)
1 x Modify Low resistance Silver-plated cord 180cm
1 x Modify Anti-reverse Latch
1 x SHS Cut Off Lever Ver.3 (Steel)
1 x Modify Modular Gear Set 6mm Ver.2/Ver.3, Top Gear 15.05:1 + Ultr
1 x Modify Modular Gear Set 6mm Ver.2/Ver.3, Speed 16.32:1
1 x JUNK Well M11 Gas Magazine (32 Rounds)
1 x Modify Ultra Low Resistance Banana Connectors (2 pair/bag)
1 x Modify Modular Gear Set 7mm Ver.2/Ver.3, Top Gear 15.05:1 + Ultr
1 x SHS Steel Cut Off Lever (Ver. 7)
1 x A&K STW Lower Gearbox Assembly for STW Airsoft Training Rifles
1 x M84 Flashbang Grenade Dummy/Light
1 x ASG Storm Apocalypse Grenade (BK)
1 x Valken Tactical Thunder V Fire Lever
1 x Night Evolution HELMET LIGHT SET GEN 3 (BK)
1 x Night Evolution Dual Function Tape Switch (NE 07010)
1 x SF M600C Mini Scout Light W/ Modbutton Switch (BK, 340 Lumens)
1 x APL Gen3 Style Pistol Flashlight (DE, 300 Lumens)
1 x SF M600DF LED Scout Light (1400 Lumens, DE)
1 x HRG Medium-Sized Portable Pistol Bag (Tan)
1 x SF M340B LED Scout Light Picatiny/M-LOK Pkg (BK, 500 Lumens)
1 x CD R-Style Standard Flashlight BK
1 x CYMA CNC Aluminum Power Up Kit For M24/M705 Sniper Rifle
1 x ACM L3 NGAL Red Laser W/LED Flashlight (Aluminun Version, BK)
1 x CD R-Style Micro Flashlight BK
1 x Wosport Urban War Rifle Bag
2 x ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (BK)
1 x SF Style Scout Light Rear Cap for M300&M60
1 x Snow Wolf M24 Full Trigger Set
1 x SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 400mm
1 x SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 450mm
1 x SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 285mm
1 x Modify Aluminum Spring Guide for Type96 Series (7mm)
1 x SF M600W Scout Light (Strobe Output Ver.)
1 x SF M340C Mini LowPro Lighting Flash Lights (BK)
1 x FUSION Style ModButton Swtch&Mount For M300,M600 DE (3.5mm)
2 x FUSION Style ModButton Swtch&Mount For M300,M600 BK (2.5mm)
1 x ML PL350-PLHv2 Light DE
1 x SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 455mm
2 x ET OGL Aiming Device(Red&IR Laser&LED)(Aluminum, DE)
1 x Modify Aluminum Spring Guide for Type96 Series (9mm)
1 x Double Bell VSR-10 Complete Metal Trigger Assembly
1 x ML PL350-PLHv2 Light BK
1 x Modify Aluminum Piston for Type96 Series
1 x Valken Tactical 42 Double Rifle Tactical Gun Bag (BK)
1 x SF M600DF LED Scout Light (1400 Lumens, BK)
1 x Tactical MOLLE Safe Case For Phone&accessories (Multicam Black)
1 x Navy Seal VIP IR LED Light (Functional Ver., BK)
1 x KIJI Style K-10 Infraed Illumination Flashlight (W/ 20mm Mount, BK)
1 x SF M640B LED Scout Light Picatiny/M-LOK Pkg (BK, 560 Lumens)
1 x SF M720V LED Tactical Flashlight (BK, 270 Lumens)
1 x SF M300B LED Tac Light(Dual Function Tape Switch,240 Lumens, BK)
1 x Madbull Stainless Steel 6.03mm Tightbore Barrel - 509mm
1 x Loading Plate for Well L96 (4401 Series)
1 x Night Evolution Remote Dual Switch (1 Plug, NE07014-BK)
1 x ED Wire Guide Clip (M-LOK&Keymod, DE)
1 x SF M600C Scout Light With SL07 Scout Dual Switch ( IR Only, 850nm)
1 x CD Optimized Weapon Light (1500 Lumens,DE)
1 x Night Evolution Tail Pressure Switch for WMX200
1 x Helmet V-Lite Marker (DE, Red)
1 x ED Wire Guide Clip (M-LOK&Keymod, BK)
1 x ML PLHv2-PDW350 Light BK
1 x Prometheus EG Inner Barrel (455mm, 6.03mm)
1 x Wosport Quick Deployment Rifle Bag
1 x Tactical MOLLE Safe Case For Phone&accessories (BK)
1 x HighReady Gear Tactical LED Flashlight (500 Lumens)
1 x Night Evolution Tactical Augmented Pressure Switch(2x3.5mm,BK)
1 x SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 300mm
1 x CD Optimized Weapon Light (1500 Lumens,BK)
1 x CD R-Style Micro Flashlight DE
1 x Matrix TTI Pistol Foam Case BK
1 x HEL STAR 6 Gen 3 LED Helmet Light/Marker (DE, Red)
1 x FUSION Style ModButton Switch&Mount For M300,M600 BK(Flashlight)
1 x Well MB01/MB05/MB08 Series Steel Trigger Assembly
1 x Manta Strobe (DE,Red)
1 x ACM L3 NGAL Red Laser W/LED Flashlight (Aluminun Version, DE)
1 x PPS Brass Hopup Unit for Type96 / APS2 Airsoft Sniper Rifles
1 x FUSION Style ModButton Swtch&Mount For M300,M600 BK (3.5mm)
2 x ET OGL Aiming Device(Red&IR Laser&LED)(Aluminum, BK)
1 x E&C Upgrade Cylinder Set For L96 Sniper Rifle
1 x SF M600C Mini Scout Light W/ Modbutton Switch (DE, 340 Lumens)
1 x Wosport Tactical Pistol Bag
1 x SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 510mm
1 x MOE Illumination Kit (BK)
1 x ML PLHv2-PDW350 Light DE
1 x SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 363mm
1 x Tactical MOLLE Safe Case For Phone&accessories (Multicam)
1 x SF M300/600 Series Tail Button Switch
1 x FMA Tactical Plastic Case (For pistol, Night Vision, Camera etc.)
1 x Tactical MOLLE Safe Case For Phone&accessories (Tan)
2 x Picatinny WireGuide System Cable Management Clip
1 x HRG Sniper Gun Bag/Mat (BK)
1 x Matrix Glock Pistol Foam Case BK
1 x HRG Tactical Seatback Molle Panel
1 x HRG Sniper Gun Bag/Mat (Tan)
1 x WiiTech Enhanced Loading Nozzle Assembly for WA
1 x A&K Masada Selector Switch Assembly
1 x WiiTech NGRS M4 Enhanced Hop-up Chamber
2 x T.Marui M870 barrel mount Installation Tool
2 x WiiTech One-way Bearing Piston Head (for Wii Tech gas cylinder)
1 x Modify Selector Plate for M4/M16 series
1 x M. Receiver Rail for T.Marui M870 Tactical Shotgun
1 x WiiTech 92F (T.Marui) Top Gas Version Power-up Loading Nozzle se
1 x SHS V2 Reinforced Selector Plate
1 x S. Receiver Rail for T.Marui M870 Tactical Shotgun
1 x WiiTech MP7 (KSC, KWA, Umarex) Top Gas Version Power-up Loading
1 x Modify Selector Plate for AK
1 x Air-tight Nozzle, Recoil Shock M4
1 x One-way Bearing Piston Head, Recoil Shock System M4 Series (TM Gas Cylinder)
1 x WiiTech A&K SVD Steel Trigger Set
1 x VFC AEG M4 Nozzle (Polymer)
1 x Wiitech Performance Hop Up Rivet
1 x Earmor M32 MOD3 Tactical Headset (2022 Ver., CB)
1 x Maple Leaf MR 70 degree AEG Hop-Up Rubber
1 x Tac-Sky RAC PTT BK (Kenwood 2 Pin)
1 x Maple Leaf OHM AEG Tensioner Hard
1 x EARMOR M12 EXFIL® Helmet Rails Adapter Attachment Kit
1 x Matrix SORDIN Headset For Helmet BK(Basic Ver., Tan)
1 x SHS M4/M16 Aluminum Nozzle
1 x Matrix SORDIN Headset For Helmet BK(Basic Ver., FG)
1 x Dominator™ 62/3000 HPA Aluminium Tank
1 x A&K Masada Hopup
1 x 4UANTUM Friction Pro-High Performance Bucking (AEG)
1 x MHI Dad Hat BK
1 x SHS MP5 Nozzle
1 x EARMOR M11-Peltor ARC Helmet Rails Adapter Attachment Kit
1 x Ztactical Comtac II
1 x Legion Baseball Cap (BK, Gold)
1 x Ztactical FBI Style Acoustic Headset (Motorola One Pin)
1 x HL Style Headset W/ Noise Cancelling/Sound Pickup MC
1 x Modify Air Seal Nozzle for PSG-1 Series
1 x Earmor M32H MOD4 Headset for FAST Helmets (2022 Ver., FG)
1 x Valken Energy Battery - PEQ (7.4v LiPo 250mAh 25C)
1 x HL Style Headset W/ Noise Cancelling/Sound Pickup For Helmet FG
1 x Mad Hatter Classic Hat Red
1 x HL Style Headset W/ Noise Cancelling/Sound Pickup PINK
1 x Tac-Sky AN/PRC152 Radio Military Harris Case W/ 6 Pins U94 PTT
1 x Earmor M32 MOD4 Tactical Headset (2022 Ver. BK)
1 x WiiTech Air-tight Nozzle, Recoil Shock M4
1 x Modify Air Seal Nozzle for P90Series
1 x Modify Air Seal Nozzle for M14 Series (Ver. 7)
1 x Maple Leaf MR 50 degree AEG Hop-Up Rubber
1 x Dominator™ SLP QD 36'' Braided Hose
1 x CQB Russian HPA Valve For TM GBB Pistol & Rifle
1 x Tac-Sky RAC Tactical Headset for ARC Rail Helmets DE
1 x Dominator™ 68/4500 HPA Carbon Tank
1 x Modify Air Seal Nozzle for Classic Army/ ECHO1 SCAR Series
1 x PDI AEG Hopup W Hold Bucking
1 x Earmor M51 PTT (Kenwood 2 Pins)
1 x Valken Tank Kits/Parts - SLP QD Air Rig 42 Hose Only
1 x Multi-Angle Rotation ARC & EXFIL Rail Adapter Suspension for Earmor, Walker, & HL Series Headsets BK
1 x Mad Hatter Classic Hat BK
1 x Modify Air Seal Nozzle for MP5-K?PDW
1 x EARMOR M11 ARC Helmet Rails Adapter Attachment Kit
1 x Maple Leaf MR 60 degree AEG Hop-Up Rubber
1 x Ztactical TEA Style PTT (Motorola Single Pin)
1 x HL Style Headset W/ Noise Cancelling/Sound Pickup FG
1 x Wolverine Airsoft 18 Wire Harness (Gen. 2)
1 x Multi-Angle Rotation ARC & EXFIL Rail Adapter Suspension for Earmor, Walker, & HL Series Headsets DE
1 x SHS SR-25 Nozzle (24mm)
1 x E&C CNC Precision Hop Up Chamber For M4
1 x Earmor S03 Silicone Gel Earmuffs Headset Accessories for M31/M32/M31H/M32H Headset
1 x Earmor Headband Cover Multicam (2022 Ver. )
1 x EARMOR M13 MTEK M-LOK Helmet Rails Adapter Attachment Kit
1 x Earmor M32 MOD4 Tactical Headset (2022 Ver., FG)
1 x Tac-Sky Team Wendy Helmet Mount For COMTAC BK
1 x Tac-Sky MTEK Helmet Mount For COMTAC BK
1 x SHS New Type SR-25 Gear set
1 x SHS High Speed Double Sector Gear Set (Ver.3)
1 x A&K M249 Gearbox
1 x Double Bell Version 3 AK Gearbox (Quick Spring Change)
1 x E&C Quick Change 8mm Bearing Gearbox (Upgraded ver.)
1 x JG Bore Up Piston Head
1 x SHS Full Steel 19 teeth Piston (For SR-25, L85)
1 x E&C Thrust Bearing Polymer Piston Head
1 x SHS POM Bore Up Silent Piston Head
1 x SHS CNC Aluminum Ball Bearing Piston Head
1 x Raid X Style Red/IR Laser Aiming Device DE
1 x King Arms Cylinder Set for Systema PTW/ A&K STW M4 - M90
1 x A&K STW/PTW M90 Complete Cylinder (300~320 FPS, Stainless Steel)
1 x SHS Bore Up Line Surface Steel Cylinder
1 x FMA LAB PEQ-NGAL LED Light + IR Red Laser DE
1 x Tactical UT Hot Button Remote Switch MLOK&Keymod, 2.5mm plug, BK
1 x Wire Guide System (M-LOK & Keymod, DE, MA Type)
1 x UT AX Button Switch For Aiming Device (BK, 3.5mm Plug)
1 x SHS Cylinder Set for AK
1 x Sotac X300/X400 Remote Dual Switch Assembly BK
1 x Sotac Remote Dual Pressure Switch Augmented Pressure Double (SF&Crane plug)
1 x Tactical UT Hot Button Remote Switch (Picatinay, 2.5mm plug, BK)
1 x SHS Cylinder For Gearbox 400-455mm (QG0005)
1 x UT AX Button Switch For Aiming Device (BK, 2.5mm Plug)
1 x ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (DE)
1 x SHS Cylinder For Gearbox 200-350mm (QG0009)
1 x FMA LAB PEQ-NGAL LED Light + IR Red Laser BK
1 x SHS Cylinder Head for M14
1 x Tactical UT Hot Button Remote Switch MLOK&Keymod, 3.5mm plug, BK
1 x UT AX Button Switch For Aiming Device (DE, 2.5mm Plug)
1 x Tactical Mini ModButton Pressure Remote Switch BK (3.5mm plug)
1 x SHS Cylinder For Gearbox 400-455mm (QG0002)
1 x SHS Cylinder For Gearbox 300-400mm (QG0008)
1 x FMA Remote Pressure Switch for Laser Devices (Style: Crane Plug / Black)
1 x SHS Aluminium Ball Bearing Spring Guide Ver.2 WD0026
$14,524.72