CALL US :416-298-3303

Shipping & Returns


General Warranty and Return Policy:


Last Updated: August 31st, 2019

Global Policies (applies to all category based policies):
  1. All sales are final, NO Refund. We only accept exchanges or store credit. If you have any questions for the products we sell, please give us a call, message us on social media, or email us.
  2. We only accept exchanges or store credits within 7 days since the product was purchased in store, or parcel was received by the end user/customer from online orders. The shipping cost of the product and the return shipping to be sent back to us will not be covered for exchange.
  3. If we deem a returned product has been abused by the end user as written within the individual policies below, we reserve the right to refuse repair, or exchange the product. We will not return the product back to the end user unless they pay for the shipping cost to be shipped back. Under this condition, IF we supplied a prepaid return shipping label to the customer earlier on, we may expect the end user to pay for the full price of the prepaid label as well.
  4. We do not guarantee perfect finishing and/or quality of the products we carry; we simply carry what the manufacturer offers us. Depending on the situation, we are capable of testing an airsoft gun before shipping out upon request.
  5. All photos on our website are purely for reference purposes only. Both the packaging and actual product may slightly differ from actuality due to slight changes per batch when procured from manufacturer and/or supplier.
  6. We do not guarantee that the original packaging/box of a product is free from dents or damage. We only guarantee that the product housed within the packaging is of working order and brand new in nature.
  7. All sales are final for products listed as clearance or junk. No warranty is provided under any circumstances whatsoever under said category. Please call or email us at support@airsoftdepot.ca for specific inquiries on clearance or junk items before purchase if unsure.
  8. All sales are also final for consumables and any battery products. Consumables are in regards to products such as (but not limited to) green gas, BBs, silicon oil/grease, and Thunder Bs.

Airsoft Guns:
  1. All airsoft gun sales are FINAL. We do not accept returns of an airsoft gun unless the gun itself is defective.
  2. All airsoft guns* carry a standard, 7 days warranty provided by Airsoft Depot Canada since the day the gun was purchased in store, or parcel was received by the end user/customer from online orders. We encourage customers to test the purchased airsoft gun as soon as possible and contact us within 48 hours of purchase. We only accept exchange for out-of-the-box defective airsoft gun products as long as a replacement of the same product is available. We can only provide a refund if a replacement cannot be provided. Please kindly give us up to 3 business days for a proper response.
  3. *Special instructions bolded or highlighted in red on certain product pages in the product descriptions may override the above rule under this (Airsoft Guns) category.
  4. Any sort of modifications done to the airsoft gun (during the warranty period) internally or externally would automatically void our warranty service. For example, painting your gun, upgrading the internals, or modifying the battery connectors to deans or vice versa with Tamiya connectors and ultimately frying your gun.
  5. Do not attempt to diagnose or repair an airsoft gun if you are faced with an issue/error from the airsoft gun itself. Stop all activity and use of the gun, and report the incident in detail to support@airsoftdepot.ca. Depending on situation and the severity of the matter, we will provide diagnosis and instructions on the issue and/or provide approval for the airsoft gun to be sent back for repair or exchange. Disassembling a newly received airsoft gun voids the warranty.
  6. Assuming the airsoft gun is deemed defective and approved for return to be exchanged or repaired, the end user customer must send it back in its original factory packaging (everything that originally came with the gun such as magazine, instructions booklet, clear plastic bag, etc). The customer is expected to wrap the packaging of the gun in completely opaque wrapping paper or garbage bag and seal well with tape. If certain conditions are met, we may instead provide a prepaid return shipping label and return shipping instructions via email.
  7. If an airsoft gun has been sent/shipped back to us under our approval during the warranty period, the cost of return shipping will be covered as a store credit (assuming a return shipping label was not provided). The store credit can be redeemed and used for future purchases on this website (airsoftdepot.ca). If the airsoft gun has been inspected, repaired, and/or replaced, we will cover the reshipping cost.
  8. If the airsoft gun has been deemed working and not defective upon inspection by our Techs, we will have you pay for the reshipping cost back to your shipping address. If a prepaid return shipping label has been provided with, we will also have you pay for said label as well. The same rule applies if the airsoft gun has been deemed damaged from customer abuse. Customer abuse happens when the end user attempts to repair, modify/tinker/take apart, upgrade the airsoft gun during the warranty period, screws it up, and provides false pretense in regards to the damage itself. Physical damage and mishandling, such as dropping the gun, using low quality Can-Tire/Walmart-tier BBs , or using the wrong rated battery (i.e. using high discharge rate battery on an airsoft gun that s not rated for it) will also count as customer abuse. Abused products do not qualify for any sort of refund or exchange.
  9. Manufacturer included "bonus items" such as, but not limited to cleaning rod, sample bb, bb loader, sling, battery, and charger, are not eligible for warranty. These "bonus items" are included AS IS and are included for testing purposes by the manufacturer. We do not guarantee the proper function of said "bonus items."

Scopes (including red dots):
  1. All scopes (except real steel scopes) are toy scopes, for Aisoft gaming ONLY, NOT for practical shooting
  2. We can not guarantee toy scopes work steel as well as real steel scopes
  3. We can not gurantee toy scopes adjustable as well as real steel scopes

Parts or Gear:
  1. A one-week warranty is only provided for out-of-the-box defective parts or gear products.
  2. We do not guarantee the fitting of the parts/scopes/gears. Please do research or ask up front.
  3. No returns or exchange for all BDUs, shirts, pants, goggles, helmets, and boots/shoes due to hygiene reasons unless it is reported "defective" within 48 hours of purchase. Please kindly do your own research, send us an email, or message us on Facebook for questions on sizing.

HRG Batteries and Chargers Extended Warranty Program
  1. We offer an extended warranty for HRG battery and charger products only of up to 30 days if purchased from Airsoft Depot Canada and its authorised retailers ONLY.
  2. Free one time exchange for defective out of the box items within 30 days of purchase or when parcel is received from Online Orders.
  3. Any signs of end user abuse such as intentional or unintentional damages are not covered by this Warranty Program and voided.
  4. Examples of abuse but not limited to would be damage caused from dropping it from the air, allowing it to be noticeably bent, dented or scraped, wrong connectors plugged or upside down, or allow it to be operated/charged in a bad environment (near a heat source, damp area).
  5. Customer is to send clear photos of 5~6 sides of the issues itself or a video of it for us to be inspect and approve the replacement.
  6. The Customer is only responsible for both shipping and return shipping if there is nothing wrong with the HRG battery and chargers themselves.
  7. Airsoft Depot Canada offers basic troubleshooting for all HRG batteries and chargers bought at authorized retailers via Online Support Center at: support@airsoftdepot.ca. Please give us up to 7 days for a proper response. Please and Thanks.

Continue
1 x 5KU Lightweight CNC Aluminum bolt for AAP-01 GBB Gold
1 x SF X300 LED Flashlight (300 lumens, BK, Perfect Edition)
2 x FAST Style Micro Mount AP T1/T2 Red Dot Riser BK
1 x PERUN V3 Optical Mosfet
1 x Airsoft Logic 0.28g BB (Bio, 3570 rds)
2 x WELL Pro WE23-X Rotary Minigun
1 x PVS-14 Weapon Mount QuickConnect Rail Mount Adapter
1 x Dual Dovetail Adapter Replaces J-Arm For PVS-14 (Aluminun)
1 x AD GBBR/Grenade Silicone Oil (30WT, 15ml)
1 x ASG Gear Grease
1 x AD GBB/Propane Tank Silicone Oil (1.5WT, 30ml)
1 x RA steel CNC firing pin (FOR WE SCAR H)
1 x FMA LAB PEQ-NGAL LED Light + IR Red Laser DE
1 x FMA LAB PEQ-NGAL LED Light + IR Red Laser BK
1 x ET OGL Aiming Device(Red&IR Laser&LED)(Aluminum, DE)
1 x Wire Guide System (M-LOK & Keymod, DE, MA Type)
1 x Tactical Mini ModButton Pressure Remote Switch BK (3.5mm plug)
1 x UT AX Button Switch For Aiming Device (DE, 2.5mm Plug)
1 x Picatinny WireGuide System Cable Management Clip
1 x UT AX Button Switch For Aiming Device (BK, 3.5mm Plug)
1 x Double Bell Bolt Set for 98K Shell Ejecting Rifle (Spring Ver.)
1 x ASP Sling Attachment Point (GBBR)
1 x GHK AKM / GKM-08 Low Muzzle Velocity Nozzle
1 x Tactical Mini ModButton Pressure Remote Switch DE (2.5mm plug)
1 x ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (DE)
1 x ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (BK)
1 x Double Bell Bolt Set for 98K Shell Ejecting Rifle (Gas Ver.)
1 x Raid X Style Red/IR Laser Aiming Device DE
1 x Wire Guide System (M-LOK & Keymod, BK, MA Type)
1 x Tactical UT Hot Button Remote Switch MLOK&Keymod, 2.5mm plug, BK
1 x Army G36 GBBR Nozzle (WE G36 Compatible)
1 x ACM L3 NGAL Red Laser W/LED Flashlight (Aluminun Version, BK)
1 x WADSN MAWL-C1 Red laser/IR Laser/LED Light/IR Light (BK)
1 x GHK M4 Standard Muzzle Velocity Nozzle
1 x Sotac Remote Dual Pressure Switch Augmented Pressure Double (SF&Crane plug)
1 x RA Steel CNC Trigger Set (for WE SCAR)
1 x Tactical Mini ModButton Pressure Remote Switch BK (2.5mm plug)
1 x WiiTech Enhanced Loading Nozzle Assembly for WA
1 x RA steel CNC firing pin base (FOR WE SCAR H)
1 x ACM L3 NGAL Red Laser W/LED Flashlight (Aluminun Version, DE)
1 x RA Adaptor for WE M4 GBB
1 x G&P WA Reinforce Spring
1 x Tactical UT Hot Button Remote Switch (Picatinay, 2.5mm plug, BK)
1 x PPS M870 Magazine Tube Fixed Bar
1 x ET OGL Aiming Device(Red&IR Laser&LED)(Aluminum, BK)
1 x G&P WA Bolt Buffer
1 x HRS PEQ-15 Class I IR Laser Aiming Device (BK)
1 x RA steel CNC trigger assembly (FOR WE SCARH)
1 x PPS M870 Steel Right/Left Fork
1 x CNC Steel Sear( For WA )
1 x 5KU Replacement Rubber Bullet for 40mm Cartridge (12pcs)
1 x UT AX Button Dual Switch For Aiming Device (BK,SF&3.5mm Plug)
1 x GHK M4 Low Muzzle Velocity Nozzle
1 x UT AX Button Switch For Aiming Device (BK, 2.5mm Plug)
1 x Raid X Style Red/IR Laser Aiming Device BK
1 x Steel Valve Lock For WA M4
1 x Tactical UT Hot Button Remote Switch MLOK&Keymod, 3.5mm plug, BK
1 x Laser Bore Sight Collimator
1 x Vltor Style Buffer Tube (for WA GBBR)
1 x FMA Modlite ModButton Lite (2.5mm Plug, DE)
1 x RA-Tech Precision inner barrel 6.01 (WE Open Bolt system, 225mm)
1 x Sotac X300/X400 Remote Dual Switch Assembly BK
1 x HRS PEQ-15 Class I IR Laser Aiming Device (DE)
1 x PTS Enhanced Sling Plate – Modular Gen 2 (ESP-M2) GBBR
1 x FUSION Style ModButton Swtch&Mount For M300,M600 BK (2.5mm)
1 x FMA Remote Pressure Switch for Laser Devices (Style: Crane Plug / Black)
1 x Tactical UT Hot Button Remote Switch (Picatinay, 3.5mm plug, BK)
1 x Valken Tactical Thunder V Fire Lever
1 x CQB Russian HPA Valve For TM GBB Pistol & Rifle
1 x Dominator™ SLP QD 36'' Braided Hose
1 x Dominator™ 68/4500 HPA Carbon Tank
1 x Dominator™ 62/3000 HPA Aluminium Tank
1 x M84 Flashbang Grenade Dummy/Light
1 x Wolverine Airsoft 18 Wire Harness (Gen. 2)
1 x Valken Tank Kits/Parts - SLP QD Air Rig 42 Hose Only
1 x Valken Paintball Universal Tank Vest Pouch BK
1 x Valken Energy Battery - PEQ (7.4v LiPo 250mAh 25C)
1 x ASG Storm Apocalypse Grenade (BK)
1 x Modify Gear Key (professional) for SMOOTH
1 x EMERSON Aluminum Shooting Target -12 inches
1 x Matrix Steel AR15 Wrench
1 x TMC STAGE Airsoft Training System Target Set (1 Host + 2 Slave)
1 x Army Armament TTI JW4 PIT VIPER GBB Pistol GBB Pistol (Standard Ver.)
1 x Airsoft Cardboard Target Paper (12pcs)
1 x WST The Texas Star Target For Airsoft
1 x Compact Model Tool Kit
1 x Element Motor Gear Tool (Install & Remove)
1 x FYT B-1121RZ Steel Target
1 x EmersonGear Linkage Reduction Metal Airgun Target
1 x Airsoft Target (2 Cardboard Target included)
1 x Element Valve Key BK
1 x MHI Dad Hat BK
1 x Mad Hatter Classic Hat Red
1 x Army Armament Full Metal R31 Classic 1911 GBB Pistol BK
1 x Legion Baseball Cap (BK, Gold)
1 x Army Armament TTI Sand Viper Airsoft GBB Pistol (Standard Ver.)
$8,545.08