CALL US :416-298-3303

Shipping & Returns


General Warranty and Return Policy:


Last Updated: August 31st, 2019

Global Policies (applies to all category based policies):
  1. All sales are final, NO Refund. We only accept exchanges or store credit. If you have any questions for the products we sell, please give us a call, message us on social media, or email us.
  2. We only accept exchanges or store credits within 7 days since the product was purchased in store, or parcel was received by the end user/customer from online orders. The shipping cost of the product and the return shipping to be sent back to us will not be covered for exchange.
  3. If we deem a returned product has been abused by the end user as written within the individual policies below, we reserve the right to refuse repair, or exchange the product. We will not return the product back to the end user unless they pay for the shipping cost to be shipped back. Under this condition, IF we supplied a prepaid return shipping label to the customer earlier on, we may expect the end user to pay for the full price of the prepaid label as well.
  4. We do not guarantee perfect finishing and/or quality of the products we carry; we simply carry what the manufacturer offers us. Depending on the situation, we are capable of testing an airsoft gun before shipping out upon request.
  5. All photos on our website are purely for reference purposes only. Both the packaging and actual product may slightly differ from actuality due to slight changes per batch when procured from manufacturer and/or supplier.
  6. We do not guarantee that the original packaging/box of a product is free from dents or damage. We only guarantee that the product housed within the packaging is of working order and brand new in nature.
  7. All sales are final for products listed as clearance or junk. No warranty is provided under any circumstances whatsoever under said category. Please call or email us at support@airsoftdepot.ca for specific inquiries on clearance or junk items before purchase if unsure.
  8. All sales are also final for consumables and any battery products. Consumables are in regards to products such as (but not limited to) green gas, BBs, silicon oil/grease, and Thunder Bs.

Airsoft Guns:
  1. All airsoft gun sales are FINAL. We do not accept returns of an airsoft gun unless the gun itself is defective.
  2. All airsoft guns* carry a standard, 7 days warranty provided by Airsoft Depot Canada since the day the gun was purchased in store, or parcel was received by the end user/customer from online orders. We encourage customers to test the purchased airsoft gun as soon as possible and contact us within 48 hours of purchase. We only accept exchange for out-of-the-box defective airsoft gun products as long as a replacement of the same product is available. We can only provide a refund if a replacement cannot be provided. Please kindly give us up to 3 business days for a proper response.
  3. *Special instructions bolded or highlighted in red on certain product pages in the product descriptions may override the above rule under this (Airsoft Guns) category.
  4. Any sort of modifications done to the airsoft gun (during the warranty period) internally or externally would automatically void our warranty service. For example, painting your gun, upgrading the internals, or modifying the battery connectors to deans or vice versa with Tamiya connectors and ultimately frying your gun.
  5. Do not attempt to diagnose or repair an airsoft gun if you are faced with an issue/error from the airsoft gun itself. Stop all activity and use of the gun, and report the incident in detail to support@airsoftdepot.ca. Depending on situation and the severity of the matter, we will provide diagnosis and instructions on the issue and/or provide approval for the airsoft gun to be sent back for repair or exchange. Disassembling a newly received airsoft gun voids the warranty.
  6. Assuming the airsoft gun is deemed defective and approved for return to be exchanged or repaired, the end user customer must send it back in its original factory packaging (everything that originally came with the gun such as magazine, instructions booklet, clear plastic bag, etc). The customer is expected to wrap the packaging of the gun in completely opaque wrapping paper or garbage bag and seal well with tape. If certain conditions are met, we may instead provide a prepaid return shipping label and return shipping instructions via email.
  7. If an airsoft gun has been sent/shipped back to us under our approval during the warranty period, the cost of return shipping will be covered as a store credit (assuming a return shipping label was not provided). The store credit can be redeemed and used for future purchases on this website (airsoftdepot.ca). If the airsoft gun has been inspected, repaired, and/or replaced, we will cover the reshipping cost.
  8. If the airsoft gun has been deemed working and not defective upon inspection by our Techs, we will have you pay for the reshipping cost back to your shipping address. If a prepaid return shipping label has been provided with, we will also have you pay for said label as well. The same rule applies if the airsoft gun has been deemed damaged from customer abuse. Customer abuse happens when the end user attempts to repair, modify/tinker/take apart, upgrade the airsoft gun during the warranty period, screws it up, and provides false pretense in regards to the damage itself. Physical damage and mishandling, such as dropping the gun, using low quality Can-Tire/Walmart-tier BBs , or using the wrong rated battery (i.e. using high discharge rate battery on an airsoft gun that s not rated for it) will also count as customer abuse. Abused products do not qualify for any sort of refund or exchange.
  9. Manufacturer included "bonus items" such as, but not limited to cleaning rod, sample bb, bb loader, sling, battery, and charger, are not eligible for warranty. These "bonus items" are included AS IS and are included for testing purposes by the manufacturer. We do not guarantee the proper function of said "bonus items."

Scopes (including red dots):
  1. All scopes (except real steel scopes) are toy scopes, for Aisoft gaming ONLY, NOT for practical shooting
  2. We can not guarantee toy scopes work steel as well as real steel scopes
  3. We can not gurantee toy scopes adjustable as well as real steel scopes

Parts or Gear:
  1. A one-week warranty is only provided for out-of-the-box defective parts or gear products.
  2. We do not guarantee the fitting of the parts/scopes/gears. Please do research or ask up front.
  3. No returns or exchange for all BDUs, shirts, pants, goggles, helmets, and boots/shoes due to hygiene reasons unless it is reported "defective" within 48 hours of purchase. Please kindly do your own research, send us an email, or message us on Facebook for questions on sizing.

HRG Batteries and Chargers Extended Warranty Program
  1. We offer an extended warranty for HRG battery and charger products only of up to 30 days if purchased from Airsoft Depot Canada and its authorised retailers ONLY.
  2. Free one time exchange for defective out of the box items within 30 days of purchase or when parcel is received from Online Orders.
  3. Any signs of end user abuse such as intentional or unintentional damages are not covered by this Warranty Program and voided.
  4. Examples of abuse but not limited to would be damage caused from dropping it from the air, allowing it to be noticeably bent, dented or scraped, wrong connectors plugged or upside down, or allow it to be operated/charged in a bad environment (near a heat source, damp area).
  5. Customer is to send clear photos of 5~6 sides of the issues itself or a video of it for us to be inspect and approve the replacement.
  6. The Customer is only responsible for both shipping and return shipping if there is nothing wrong with the HRG battery and chargers themselves.
  7. Airsoft Depot Canada offers basic troubleshooting for all HRG batteries and chargers bought at authorized retailers via Online Support Center at: support@airsoftdepot.ca. Please give us up to 7 days for a proper response. Please and Thanks.

Continue
1 x SF M600C Mini Scout Light W/ Modbutton Switch (BK, 340 Lumens)
1 x Wosport Urban War Rifle Bag
1 x Double Bell G36C Airsoft AEG Rifle
2 x Dominator™ 13/3000 HPA Aluminum Tank
1 x PPS Straight M4/M870 Stock Adaptor
1 x Earmor M32 MOD4 Tactical Headset (2022 Ver., FG)
1 x Sig Sauer P320 ASP, .177 Caliber, BK
1 x MHI Dad Hat BK
1 x Legion Baseball Cap (BK, Gold)
3 x FMA LAB PEQ-NGAL LED Light + IR Red Laser BK
2 x FMA Remote Pressure Switch for Laser Devices (Style: Crane Plug / Black)
1 x Tactical UT Hot Button Remote Switch MLOK&Keymod, 2.5mm plug, BK
1 x WELL Pro WE07 M4 SBR AEG (Gen2, ETU Ver., 30RPS)
1 x Classic Army Metal Mount Base For M14 Series (works with Cyma after modifying)
1 x RA steel CNC trigger assembly (FOR WE SCARH)
1 x 16340 CR123A Rechargeable Battery (3.7V, 750MAH)
1 x Dominator™ SLP QD 36'' Braided Hose
1 x Dominator™ 68/4500 HPA Carbon Tank
1 x AW Custom Dominator M4 Magazine Adapter for GLOCK Series
1 x CQB Russian HPA Valve For TM GBB Pistol & Rifle
1 x Dominator™ 62/3000 HPA Aluminium Tank
1 x Dominator International Dominator™ Micro 3 HPA Air Regulator W/ Lock
1 x Classic Army CA5A2 - Fixed Stock
1 x Dominator™ Tactical Fibre Optic Front-Sight Assembly Green
1 x WE 24 Rd G Model 17 / 18 / 34 MOS Ver. Gas Magazine ( Black )
1 x Armorer Works VX7/Glock Series (Standard Slide Ver. ) Magazine
1 x Armorer Works Adaptive Drum Magazine - VX/ G Series BK
1 x Armorer Works VX9/Glock Series (Standard Slide Ver. ) Magazine
2 x Classic Army 40 Rounds Mid-Cap Magazine for SVD AEG series
2 x Double Bell SCAR-H 90rds Mid-cap Magazine BK
1 x A&K/E&C M110 190 rds midcap magazine
2 x A&K/E&C M110 360 rds hicap magazine
2 x E&C 417 Polymer Mid-cap Magazine 110 BBS
2 x S&T Sterling 110rd Midcap Magazine
1 x VSS Magazine (Hicap, 200 rounds)
1 x Double Bell SCAR-H 90rds Mid-cap Magazine DE
2 x Ares M45 55rds Shorty Midcap Magazine
2 x E&C 130rds M110/SR25 Midcap Magazine
2 x Double Bell Version 3 AK Gearbox (Quick Spring Change)
1 x SHS Steel Oilless bushings with cross slot (7mm)
1 x SHS Steel Oilless bushings with cross slot (8mm)
2 x A&K M249 Gearbox
1 x A&K 8mm Bearing (For M249/M60 HMG Series)
1 x Element Ball Bearing Metal 7MM
1 x GATE USB-Link for GATE Control Station App
2 x SHS Ver2 Super Cool High Torque Motor
1 x Modify Air Seal Nozzle for Classic Army/ ECHO1 SCAR Series
1 x SHS Shim Set
1 x DyTac Drop-In MOSFET Unit (Rear Wiring / T Plug)
1 x Modify Air Seal Nozzle for M14 Series (Ver. 7)
1 x SHS Full Steel 14 Teeth Piston
2 x Modify Full Tune-up Kit for AK-47/47S (Torque 21.6/ S120+)
2 x One-way Bearing Piston Head, Recoil Shock System M4 Series (TM Gas Cylinder)
2 x A&K STW Motor for Systema PTW type M4 Series Airsoft AEG
2 x SHS Speed-Up Gear Set for V2/3 AEG GENIII (13:1, CL14006)
2 x SHS POM Bore Up Silent Piston Head
1 x SHS Cut Off Lever Ver.3 (Steel)
1 x SHS AK Aluminum Nozzle
2 x SHS Full Steel 15 Teeth Pion piston
2 x SHS Steel Cut Off Lever (Ver. 7)
2 x Cyma AK Metal Selector Lever & Safety Set
1 x SHS Ver2 High Speed Motor
2 x E&C Ver. 2 Cylinder Complete Upgrade Set
2 x VFC High Speed AEG Piston (Metal Teeth)
2 x Modify Full Tune-up Kit for AK-47/47S (Speed 16.32 / S100+)
1 x Motor Pinion Gear (O Shape)
2 x VFC MP7 AEG Original Tappet Plate
1 x SHS Spring Set Version2
1 x SHS SR-25 Nozzle (24mm)
1 x ESHOOTER KESTREL V3 BASIC Airsoft ETU
2 x Tienly Infinity GT-35000 Motor Long Type
1 x SHS Full Steel 15 Teeth Pion piston (Light Weight Version)
2 x Modify Modular Gear Set 7mm Ver.2/Ver.3, Top Gear 15.05:1 + Ultr
2 x WiiTech One-way Bearing Piston Head (for Wii Tech gas cylinder)
2 x SHS Nylon Tappet Plate (Version 2)
2 x Modify Tappet Ver. 3
2 x JG Bore Up Piston Head
2 x SHS Ver2 High Torque Motor
2 x SHS Speed-Up Gear Set for V2/3 AEG GENIII (18:1, CL14002)
2 x SHS Full Steel 19 teeth Piston (For SR-25, L85)
1 x Modify Cut Off Lever Ver.2 (Steel)
1 x Gate TITAN AEG Mosfet System DROP-in MODULE Rear Wired V2 Basic
1 x FMA EXF BUMP Helmet RG TB741 M/L
2 x FMA SF Super High Cut HELMET FG M/L
1 x FMA XD GEAR Magazine Pouch for XDM (Belt type) BK
1 x FMA EXF BUMP Helmet BK TB741 M/L
1 x FMA SF Super High Cut HELMET BK M/L
2 x FMA One Oclock Offset Mount (DE)
2 x FMA Multifunctional Cover for Maritime Fast Helmet BK
1 x VFC Avalon ECS M4 Complete Gearbox (Model: M120 / Flat Trigger)
2 x FMA Tactical Plastic Case (For pistol, Night Vision, Camera etc.)
1 x FMA TD Grip For M-LOK SYS BK
1 x FMA High Cut Fast Hemet Cove (DE, Medium)
1 x FMA PVS-31 With Function Version(B)TB1284-B
1 x FMA High Cut Fast Helmet Cove (Multicam, Medium)
1 x FMA Fast Type Ballistic Helmet Cover (OD, Large)
2 x Manta Strobe (DE,Red)
1 x E&C Quick Change 8mm Bearing Gearbox (Upgraded ver.)
2 x FMA FAST Helmet Side Rail Mount Bungee Lanyard (BK)
1 x SHS Aluminium Ball Bearing Spring Guide Ver.2 WD0010
2 x FMA LAB PEQ-NGAL LED Light + IR Red Laser DE
1 x SHS CNC Aluminum Ball Bearing Piston Head
1 x SHS Aluminium Ball Bearing Spring Guide Ver.3 WD0011
1 x FMA Caiman Bump Helmet (New Liner Gear Adjustment, M/L, BK)
1 x VFC MP7 AEG Original Piston/Piston Head Set
2 x FMA Modlite ModButton Lite (2.5mm Plug, DE)
1 x FMA Caiman Bump Helmet (New Liner Gear Adjustment, M/L, RG)
1 x E&C Thrust Bearing Polymer Piston Head
1 x SHS Ver3 High Speed Motor
1 x TMC Original Cutting G3 Combat Pants (RG, Waist 34'')
1 x Modify Anti-reverse Latch
1 x Modify Modular Gear Set 6mm Ver.2/Ver.3, Top Gear 15.05:1 + Ultr
1 x Modify Modular Gear Set 6mm Ver.2/Ver.3, Speed 16.32:1
1 x Modify Modular Gear Set 7mm Ver.2/Ver.3, Torque 21.6:1
1 x SHS Nylon Tappet Plate (Version 3)
1 x TMC Original Cutting G3 Combat Pants (RG, Waist 30'')
1 x FMA SF Super High Cut HELMET BK L/XL
1 x FMA EXF Helmet Cover Multicam
1 x FMA PVS-18 Dummy
1 x FMA SF Super High Cut HELMET FG L/XL
1 x FMA Fast Type Ballistic Helmet Cover (DE, Large)
1 x FMA Caiman Bump Helmet (New Liner Gear Adjustment, L/XL, BK)
1 x S&T M40A3 Sportline Spring Power Rifle (OD)
$10,300.84