CALL US :416-298-3303

Shipping & Returns


General Warranty and Return Policy:


Last Updated: August 31st, 2019

Global Policies (applies to all category based policies):
  1. All sales are final, NO Refund. We only accept exchanges or store credit. If you have any questions for the products we sell, please give us a call, message us on social media, or email us.
  2. We only accept exchanges or store credits within 7 days since the product was purchased in store, or parcel was received by the end user/customer from online orders. The shipping cost of the product and the return shipping to be sent back to us will not be covered for exchange.
  3. If we deem a returned product has been abused by the end user as written within the individual policies below, we reserve the right to refuse repair, or exchange the product. We will not return the product back to the end user unless they pay for the shipping cost to be shipped back. Under this condition, IF we supplied a prepaid return shipping label to the customer earlier on, we may expect the end user to pay for the full price of the prepaid label as well.
  4. We do not guarantee perfect finishing and/or quality of the products we carry; we simply carry what the manufacturer offers us. Depending on the situation, we are capable of testing an airsoft gun before shipping out upon request.
  5. All photos on our website are purely for reference purposes only. Both the packaging and actual product may slightly differ from actuality due to slight changes per batch when procured from manufacturer and/or supplier.
  6. We do not guarantee that the original packaging/box of a product is free from dents or damage. We only guarantee that the product housed within the packaging is of working order and brand new in nature.
  7. All sales are final for products listed as clearance or junk. No warranty is provided under any circumstances whatsoever under said category. Please call or email us at support@airsoftdepot.ca for specific inquiries on clearance or junk items before purchase if unsure.
  8. All sales are also final for consumables and any battery products. Consumables are in regards to products such as (but not limited to) green gas, BBs, silicon oil/grease, and Thunder Bs.

Airsoft Guns:
  1. All airsoft gun sales are FINAL. We do not accept returns of an airsoft gun unless the gun itself is defective.
  2. All airsoft guns* carry a standard, 7 days warranty provided by Airsoft Depot Canada since the day the gun was purchased in store, or parcel was received by the end user/customer from online orders. We encourage customers to test the purchased airsoft gun as soon as possible and contact us within 48 hours of purchase. We only accept exchange for out-of-the-box defective airsoft gun products as long as a replacement of the same product is available. We can only provide a refund if a replacement cannot be provided. Please kindly give us up to 3 business days for a proper response.
  3. *Special instructions bolded or highlighted in red on certain product pages in the product descriptions may override the above rule under this (Airsoft Guns) category.
  4. Any sort of modifications done to the airsoft gun (during the warranty period) internally or externally would automatically void our warranty service. For example, painting your gun, upgrading the internals, or modifying the battery connectors to deans or vice versa with Tamiya connectors and ultimately frying your gun.
  5. Do not attempt to diagnose or repair an airsoft gun if you are faced with an issue/error from the airsoft gun itself. Stop all activity and use of the gun, and report the incident in detail to support@airsoftdepot.ca. Depending on situation and the severity of the matter, we will provide diagnosis and instructions on the issue and/or provide approval for the airsoft gun to be sent back for repair or exchange. Disassembling a newly received airsoft gun voids the warranty.
  6. Assuming the airsoft gun is deemed defective and approved for return to be exchanged or repaired, the end user customer must send it back in its original factory packaging (everything that originally came with the gun such as magazine, instructions booklet, clear plastic bag, etc). The customer is expected to wrap the packaging of the gun in completely opaque wrapping paper or garbage bag and seal well with tape. If certain conditions are met, we may instead provide a prepaid return shipping label and return shipping instructions via email.
  7. If an airsoft gun has been sent/shipped back to us under our approval during the warranty period, the cost of return shipping will be covered as a store credit (assuming a return shipping label was not provided). The store credit can be redeemed and used for future purchases on this website (airsoftdepot.ca). If the airsoft gun has been inspected, repaired, and/or replaced, we will cover the reshipping cost.
  8. If the airsoft gun has been deemed working and not defective upon inspection by our Techs, we will have you pay for the reshipping cost back to your shipping address. If a prepaid return shipping label has been provided with, we will also have you pay for said label as well. The same rule applies if the airsoft gun has been deemed damaged from customer abuse. Customer abuse happens when the end user attempts to repair, modify/tinker/take apart, upgrade the airsoft gun during the warranty period, screws it up, and provides false pretense in regards to the damage itself. Physical damage and mishandling, such as dropping the gun, using low quality Can-Tire/Walmart-tier BBs , or using the wrong rated battery (i.e. using high discharge rate battery on an airsoft gun that s not rated for it) will also count as customer abuse. Abused products do not qualify for any sort of refund or exchange.
  9. Manufacturer included "bonus items" such as, but not limited to cleaning rod, sample bb, bb loader, sling, battery, and charger, are not eligible for warranty. These "bonus items" are included AS IS and are included for testing purposes by the manufacturer. We do not guarantee the proper function of said "bonus items."

Scopes (including red dots):
  1. All scopes (except real steel scopes) are toy scopes, for Aisoft gaming ONLY, NOT for practical shooting
  2. We can not guarantee toy scopes work steel as well as real steel scopes
  3. We can not gurantee toy scopes adjustable as well as real steel scopes

Parts or Gear:
  1. A one-week warranty is only provided for out-of-the-box defective parts or gear products.
  2. We do not guarantee the fitting of the parts/scopes/gears. Please do research or ask up front.
  3. No returns or exchange for all BDUs, shirts, pants, goggles, helmets, and boots/shoes due to hygiene reasons unless it is reported "defective" within 48 hours of purchase. Please kindly do your own research, send us an email, or message us on Facebook for questions on sizing.

HRG Batteries and Chargers Extended Warranty Program
  1. We offer an extended warranty for HRG battery and charger products only of up to 30 days if purchased from Airsoft Depot Canada and its authorised retailers ONLY.
  2. Free one time exchange for defective out of the box items within 30 days of purchase or when parcel is received from Online Orders.
  3. Any signs of end user abuse such as intentional or unintentional damages are not covered by this Warranty Program and voided.
  4. Examples of abuse but not limited to would be damage caused from dropping it from the air, allowing it to be noticeably bent, dented or scraped, wrong connectors plugged or upside down, or allow it to be operated/charged in a bad environment (near a heat source, damp area).
  5. Customer is to send clear photos of 5~6 sides of the issues itself or a video of it for us to be inspect and approve the replacement.
  6. The Customer is only responsible for both shipping and return shipping if there is nothing wrong with the HRG battery and chargers themselves.
  7. Airsoft Depot Canada offers basic troubleshooting for all HRG batteries and chargers bought at authorized retailers via Online Support Center at: support@airsoftdepot.ca. Please give us up to 7 days for a proper response. Please and Thanks.

Continue
1 x Sig Sauer P320 ASP, .177 Caliber, BK
1 x Maple Leaf MR 50 degree AEG Hop-Up Rubber
1 x SHS Cut Off Lever Ver.3 (Steel)
1 x E&C Gear Box Switch For Version 2 Gear Box
1 x Modify Modular Gear Set 6mm Ver.2/Ver.3, Speed 16.32:1
1 x Modify Tappet Ver. 3
1 x SHS Ver2 High Torque Motor
1 x SHS Ver2 High Speed Motor
1 x EMG / Salient Arms International DS 4.3 Patch
1 x Symphogear Ichaival Velcro Patch
1 x SHS POM Bore Up Silent Piston Head
1 x VFC MP7 AEG Original Piston/Piston Head Set
1 x JG Bore Up Piston Head
1 x A&K STW/PTW M90 Complete Cylinder (300~320 FPS, Stainless Steel)
1 x SHS Cylinder Head for M14
1 x Gate TITAN AEG Mosfet System DROP-in MODULE Rear Wired V2 Basic
1 x Burst Avocado Programmable MOSFET For Airsoft AEG Rifles (Model: Ver V / Small Tamiya)
1 x A&K M249 Gearbox
2 x SHS SR-25 Nozzle (24mm)
1 x Modify Air Seal Nozzle for Classic Army/ ECHO1 SCAR Series
1 x Dominator International Dominator™ Micro 3 HPA Air Regulator W/ Lock
1 x Army Armament TTI Combat Master Alpha GBB Airsoft (Black Ver.)
1 x Action Army AAP-01 "Assassin" Airsoft Gas Blowback Pistol BK
1 x Canik x Salient Arms TP9 Elite Combat Airsoft Training Pistol (FDE)
1 x E&C EC-34 GBB Airsoft Pistol
1 x Modify Modular Gear Set 7mm Ver.2/Ver.3, Top Gear 15.05:1 + Ultr
1 x SHS Steel Cut Off Lever (Ver. 7)
1 x SHS Speed-Up Gear Set for V2/3 AEG GENIII (18:1, CL14002)
1 x MK1 Tactical Helmet Accessory Platform (Multicam)
1 x HRG Modular Assault MK3 Chest Rig (Multicam)
1 x Fast Helmet Side Cover (OD)
1 x HRG FCPC Low Profile Combat Vest (Multicam)
1 x HRG FCPC Low Profile Combat Vest (CB)
1 x EmersomGear JPC/AVS 6x6 Side Amor Carrier Set BK
1 x L4G24 NVG MOUNT Aluminum (DE)
1 x HRG Universal Holster (Standard Version)
1 x WST 6354 DO Holster For Glock 17/19 with X300/X300U (Multicam)
1 x Cytac/Amomax Holster For STI/Hicapa (BK, Left-handed)
2 x TMC HM Flash Light Bearing Concealment Holster G17 (BK)
1 x SF Style Rapid Deploy Holster For Pistol /W XH15/XH35/X300UH-B
1 x Modular Military Vest SRB Side Release Buckle (2pcs, BK)
1 x Lambda Defense B&T GHM9 COMPACT-G PCC GBB Airsoft SMG
1 x Army Armament AUG Para AEG W/ 1.5X Scope (OD)
1 x Army Armament AUG Carbine AEG W/ 1.5X Scope (OD)
1 x M4x25mm screw with nut
1 x Tac Latch Handles (Red)
1 x Gate Quantum Trigger (Black)
1 x Matrix Tactical Charging Handle For M4/M16 /AEG DE
1 x Cyma M4/M16 Dust Cover( Metal, For AEG )
1 x 5KU AK RP-1 Extended Charging Handle Knob
1 x Amomax Tactical Holster For G19 (Gen2)
1 x Cytac/Amomax Gen 2 G Series Holster (Left Hand)
1 x Amomax Per-Fit Holster (Fits over 80 handguns, BK, Left-hand)
1 x Hurricane Universial Drop-leg Holster (Tan)
1 x Amomax Glock Series Holster
1 x TMC HM Flash Light Bearing Concealment Holster 1911 (BK)
1 x Cytac/Amomax Molle Adapter (Holster/Mag)
1 x Matrix SFL Kydex Quickdraw Holster (G17/19/19X/45)
1 x HRG Graphene 11.1V PEQ Lipo Battery (20C, 1300mAh, Tamiya)
1 x HRG Graphene 11.1V Lipo Battery (20C, 1100mAh, Dean)
1 x Airsoft Logic 11.1V lipo (20C, 1100MAH, Dean)
1 x HRG Intellect 2S 3S LiPo Low Voltage Meter And Alarm
2 x Army Glock Hammer Assembly
2 x HM Brace Glock Kit Holster
1 x E&C Trigger Unit for G-Series GBB Pistol
2 x CowCow AAP-01 150% Nozzle Return Spring
1 x Maple Leaf Autobot 50 degree GBB/VSR Hop-Up Rubber
1 x 5KU Lightweight CNC Aluminum bolt for AAP-01 GBB Gold
1 x Bell ZEW Chrome/Tan Aluminum Slide Set For G Series17 (For TM,Be
1 x WiiTech Glock (T.Marui) CNC Steel Knocker
2 x Matrix CNC Aluminum Extended Magazine Release for Glock Gold
1 x Bell G17 Screw Set (For G Series GBB Pistol)
2 x WiiTech G Series 17 Series (T.Marui) CNC Hardened Steel Hammer
1 x Armorer Works VX/G-Series Nozzle Assembly RMR/MOS Ver.
1 x HM Flux Style Brace w/ holster set For Glock GBB Series
1 x CowCow AAP-01 Trigger TypeA Black
1 x Bell Glock Series Nozzle Housing Set (TM, Bell Compatible)
1 x E&C G17 Slide (Full metal, engraved marking)
1 x PDI Raven 6.01 Steel Tightore Barrel For Pistol (113mm)
1 x KWC CZ 75 CO2 Magazine
2 x KJWorks SP-02 Shadow 2 CO2 Magazine
1 x CYMA TAPCO Style AK 110rds Midcap Magazine
1 x Double Bell AK Metal Midcap Magazine (150 rds)
1 x CYMA MAP Style AK Magazine (200 rds, BK)
1 x Cyma AK-74 Mid-Cap Magazine (150 rds, Orange)
1 x A&K K5 MOD1 200 rds Hicap Magazine (Box Set of 10 pcs)
1 x G18 Complete Nozzle Housing Assembly (For TM spec and E&C etc.)
1 x G17 Complete Nozzle Housing Assembly (For WE,TM,E&C etc.)
1 x WE G-Series/Hicapa Gas Magazine Fill Valve
1 x GunsModify 125% SS Recoil Spring Guide Set- G17/G18C BK
1 x 5KU Lightweight CNC Aluminum bolt for AAP-01 GBB BK
1 x Matrix CNC Aluminum Extended Magazine Release for Glock Grey
1 x Army Armament G Series Extended Magwell
1 x Maple Leaf Hop-up chamber for WE/TM G-Series
1 x Army Ambidextrous Thumb Rest For Glock
1 x CowCow AAP-01 200% Nozzle Return Spring
1 x SK Pistol 6.02 Tightbore Inner Barrel For TM M92
1 x Matrix CNC Aluminum Extended Magazine Release for Glock Red
1 x CYMA AK-74 Metal Mid-Cap Magazine (150 rds)
1 x Double Bell AK74N (Steel, Real Wood, QD Gearbox, 2021 Ver. Two Magazines Ver.)
1 x Double Bell AKMS (Steel , Real Wood, QD Gearbox, Two Magazines Ver.)
1 x Double Bell AKS-74U (Steel , Real Wood, QD Gearbox, 2023 Ver., Two Magazines Ver.)
1 x Double Bell AKM (Steel, Real Wood, QD Gearbox, 2023 Ver., Two Magazines Ver.)
1 x A&K Masada Hopup
1 x WiiTech NGRS M4 Enhanced Hop-up Chamber
1 x Hopup C Clip
$7,373.27