CALL US :416-298-3303

Shipping & Returns


General Warranty and Return Policy:


Last Updated: August 31st, 2019

Global Policies (applies to all category based policies):
  1. All sales are final, NO Refund. We only accept exchanges or store credit. If you have any questions for the products we sell, please give us a call, message us on social media, or email us.
  2. We only accept exchanges or store credits within 7 days since the product was purchased in store, or parcel was received by the end user/customer from online orders. The shipping cost of the product and the return shipping to be sent back to us will not be covered for exchange.
  3. If we deem a returned product has been abused by the end user as written within the individual policies below, we reserve the right to refuse repair, or exchange the product. We will not return the product back to the end user unless they pay for the shipping cost to be shipped back. Under this condition, IF we supplied a prepaid return shipping label to the customer earlier on, we may expect the end user to pay for the full price of the prepaid label as well.
  4. We do not guarantee perfect finishing and/or quality of the products we carry; we simply carry what the manufacturer offers us. Depending on the situation, we are capable of testing an airsoft gun before shipping out upon request.
  5. All photos on our website are purely for reference purposes only. Both the packaging and actual product may slightly differ from actuality due to slight changes per batch when procured from manufacturer and/or supplier.
  6. We do not guarantee that the original packaging/box of a product is free from dents or damage. We only guarantee that the product housed within the packaging is of working order and brand new in nature.
  7. All sales are final for products listed as clearance or junk. No warranty is provided under any circumstances whatsoever under said category. Please call or email us at support@airsoftdepot.ca for specific inquiries on clearance or junk items before purchase if unsure.
  8. All sales are also final for consumables and any battery products. Consumables are in regards to products such as (but not limited to) green gas, BBs, silicon oil/grease, and Thunder Bs.

Airsoft Guns:
  1. All airsoft gun sales are FINAL. We do not accept returns of an airsoft gun unless the gun itself is defective.
  2. All airsoft guns* carry a standard, 7 days warranty provided by Airsoft Depot Canada since the day the gun was purchased in store, or parcel was received by the end user/customer from online orders. We encourage customers to test the purchased airsoft gun as soon as possible and contact us within 48 hours of purchase. We only accept exchange for out-of-the-box defective airsoft gun products as long as a replacement of the same product is available. We can only provide a refund if a replacement cannot be provided. Please kindly give us up to 3 business days for a proper response.
  3. *Special instructions bolded or highlighted in red on certain product pages in the product descriptions may override the above rule under this (Airsoft Guns) category.
  4. Any sort of modifications done to the airsoft gun (during the warranty period) internally or externally would automatically void our warranty service. For example, painting your gun, upgrading the internals, or modifying the battery connectors to deans or vice versa with Tamiya connectors and ultimately frying your gun.
  5. Do not attempt to diagnose or repair an airsoft gun if you are faced with an issue/error from the airsoft gun itself. Stop all activity and use of the gun, and report the incident in detail to support@airsoftdepot.ca. Depending on situation and the severity of the matter, we will provide diagnosis and instructions on the issue and/or provide approval for the airsoft gun to be sent back for repair or exchange. Disassembling a newly received airsoft gun voids the warranty.
  6. Assuming the airsoft gun is deemed defective and approved for return to be exchanged or repaired, the end user customer must send it back in its original factory packaging (everything that originally came with the gun such as magazine, instructions booklet, clear plastic bag, etc). The customer is expected to wrap the packaging of the gun in completely opaque wrapping paper or garbage bag and seal well with tape. If certain conditions are met, we may instead provide a prepaid return shipping label and return shipping instructions via email.
  7. If an airsoft gun has been sent/shipped back to us under our approval during the warranty period, the cost of return shipping will be covered as a store credit (assuming a return shipping label was not provided). The store credit can be redeemed and used for future purchases on this website (airsoftdepot.ca). If the airsoft gun has been inspected, repaired, and/or replaced, we will cover the reshipping cost.
  8. If the airsoft gun has been deemed working and not defective upon inspection by our Techs, we will have you pay for the reshipping cost back to your shipping address. If a prepaid return shipping label has been provided with, we will also have you pay for said label as well. The same rule applies if the airsoft gun has been deemed damaged from customer abuse. Customer abuse happens when the end user attempts to repair, modify/tinker/take apart, upgrade the airsoft gun during the warranty period, screws it up, and provides false pretense in regards to the damage itself. Physical damage and mishandling, such as dropping the gun, using low quality Can-Tire/Walmart-tier BBs , or using the wrong rated battery (i.e. using high discharge rate battery on an airsoft gun that s not rated for it) will also count as customer abuse. Abused products do not qualify for any sort of refund or exchange.
  9. Manufacturer included "bonus items" such as, but not limited to cleaning rod, sample bb, bb loader, sling, battery, and charger, are not eligible for warranty. These "bonus items" are included AS IS and are included for testing purposes by the manufacturer. We do not guarantee the proper function of said "bonus items."

Scopes (including red dots):
  1. All scopes (except real steel scopes) are toy scopes, for Aisoft gaming ONLY, NOT for practical shooting
  2. We can not guarantee toy scopes work steel as well as real steel scopes
  3. We can not gurantee toy scopes adjustable as well as real steel scopes

Parts or Gear:
  1. A one-week warranty is only provided for out-of-the-box defective parts or gear products.
  2. We do not guarantee the fitting of the parts/scopes/gears. Please do research or ask up front.
  3. No returns or exchange for all BDUs, shirts, pants, goggles, helmets, and boots/shoes due to hygiene reasons unless it is reported "defective" within 48 hours of purchase. Please kindly do your own research, send us an email, or message us on Facebook for questions on sizing.

HRG Batteries and Chargers Extended Warranty Program
  1. We offer an extended warranty for HRG battery and charger products only of up to 30 days if purchased from Airsoft Depot Canada and its authorised retailers ONLY.
  2. Free one time exchange for defective out of the box items within 30 days of purchase or when parcel is received from Online Orders.
  3. Any signs of end user abuse such as intentional or unintentional damages are not covered by this Warranty Program and voided.
  4. Examples of abuse but not limited to would be damage caused from dropping it from the air, allowing it to be noticeably bent, dented or scraped, wrong connectors plugged or upside down, or allow it to be operated/charged in a bad environment (near a heat source, damp area).
  5. Customer is to send clear photos of 5~6 sides of the issues itself or a video of it for us to be inspect and approve the replacement.
  6. The Customer is only responsible for both shipping and return shipping if there is nothing wrong with the HRG battery and chargers themselves.
  7. Airsoft Depot Canada offers basic troubleshooting for all HRG batteries and chargers bought at authorized retailers via Online Support Center at: support@airsoftdepot.ca. Please give us up to 7 days for a proper response. Please and Thanks.

Continue
2 x SHS Cut Off Lever Ver.3 (Steel)
3 x Modify Air Seal Nozzle for PSG-1 Series
3 x Modify Air Seal Nozzle for M14 Series (Ver. 7)
1 x Modify Ultra Low Resistance Banana Connectors (2 pair/bag)
1 x Modify M80 Spring for APS/TYPE96/MOD24/SSG24 series Modify Bolt
1 x Modify Full Tune-up Kit for AK-47/47S (Torque 21.6/ S120+)
1 x Modify Airsoft Spring|Irregular-Pitch for MOD24/ APS-2 (M110)
2 x Modify Cylinder for M14 (Ver. 7)
1 x Modify Cylinder Set for M14 (Ver. 7)
2 x Modify Air Seal Nozzle for Classic Army/ ECHO1 SCAR Series
1 x Modify Dean Ultra Plug (T-Shape Connector) new
1 x Modify Aluminum Spring Guide for Type96 Series (7mm)
1 x Modify Modular Gear Set 7mm Ver.2/Ver.3, Speed 16.32:1
1 x Modify Modular Gear Set 7mm Ver.2/Ver.3, Torque 21.6:1
1 x Modify Modular Gear Set 6mm Ver.2/Ver.3, Top Gear 15.05:1 + Ultr
1 x Modify Selector Plate for AK
1 x Modify Low resistance Silver-plated cord 180cm
2 x Modify Aluminum Piston for Type96 Series
1 x Valken Tactical Thunder V Fire Lever
1 x Modify Cut Off Lever Ver.2 (Steel)
1 x Modify Air Seal Nozzle for P90Series
1 x Modify Anti-reverse Latch
1 x Modify Tappet Ver. 3
2 x SHS Steel Cut Off Lever (Ver. 7)
1 x Modify Modular Gear Set 6mm Ver.2/Ver.3, Speed 16.32:1
2 x Modify Full Tune-up Kit for AK-47/47S (Speed 16.32 / S100+)
1 x Modify Gear Key (professional) for SMOOTH
1 x Modify Safety Catch for Marui M16 series
1 x M84 Flashbang Grenade Dummy/Light
2 x ASG Storm Apocalypse Grenade (BK)
1 x HRG JPC Style Plate Carrier (Tan)
1 x HRG V Style Scarab Multifunctional Tactical Vest (RG)
1 x Well Webley 6mm BB CO2 Revolver (Black)
1 x MHI Dad Hat BK
1 x Matrix TTI Pistol Foam Case BK
1 x Armorer Works HX Sight Mount Kit
1 x FAST LPVO Scope Mount 30mm Scope Rail Mount - BK
1 x Dominator™ SLP QD 36'' Braided Hose
1 x GG Lerna Style Mount Kit For Eotech
1 x HRG Tactical Seatback Molle Panel
1 x M16 M4 AR15 Carry Handle 20mm Weaver Rail
2 x AW Custom Dominator M4 Magazine Adapter for GLOCK Series
1 x 5KU Aimpoint Carbon Mount (Bllack, MARUI HI-CAPA)
1 x Sotac Remote Dual Pressure Switch Augmented Pressure Double (SF&Crane plug)
1 x MK18 Comp M2 Mount For Aimpoint M2/M3
1 x Tactical Mini ModButton Pressure Remote Switch DE (2.5mm plug)
1 x AK Rear Sight Rail Mount
1 x Tactical UT Hot Button Remote Switch MLOK&Keymod, 2.5mm plug, BK
1 x Double Bell AK Metal Midcap Magazine (150 rds)
2 x HRG Sniper Gun Bag/Mat (Tan)
1 x WE G-Series/Hicapa Gas Magazine Fill Valve
1 x 5KU Aluminum STI 2011 Style Magazine Base for Hi-Capa (Red)
1 x SW 210 rds Magazine for Thompson M1A1 AEG (XX Type)
1 x EMG/Army Armament R613 Staccato Licensed XL RMR Mount 2011 GBB Airsoft Pistol
1 x Army Armament TTI Sand Viper Airsoft GBB Pistol (CNC Slide, Glossy finish Ver.)
1 x Army Armament Staccato DVC P GBB Airsoft Pistol (RMR ready, BK)
1 x Army Armament Costa Carry Comp GBB Pistol BK
1 x Army Armament Full Metal R45A1 GBB Pistol (BK)
1 x Army Armament Full Metal R32 GBB Airsoft Pistol (Tan)
2 x EMG/Army Armament R618 Staccato Licensed XC 2011 GBB Airsoft Pistol
1 x Macross Robot Defence Force
1 x Japari Park Wood Lapel Pin
1 x Japari Coin
1 x Enjeru
1 x EG AP Comp M5S 2MOA Red Dot
2 x Tactical Airsoft Tail Remote Protection Panel BK
1 x BCM­® GUNFIGHTER M-LOK™ RAIL PANEL KIT, 5.5-INCH FIVE PACK BK
2 x Ladder Rail Cover(BK)
1 x Larue style index clip(BK, 72 pcs, with handstop )
1 x MP Style M-LOK Rail Cover BK
1 x Wire Guide System (M-LOK & Keymod, DE, MA Type)
1 x Wire Guide System (M-LOK & Keymod, BK, MA Type)
2 x KAC Rail Cover (4PCS)
1 x SHS Cylinder For Gearbox 300-400mm (QG0008)
1 x SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 363mm
1 x SHS Steel CNC Bearing Bushing 7MM (SHS-ZT0018)
1 x SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 455mm
1 x SHS CNC Aluminium Cylinder Head for AK AEG (Ver3, Long Type)
1 x Dominator™ 13/3000 HPA Aluminum Tank
1 x Dominator™ 68/4500 HPA Carbon Tank
1 x CQB Russian HPA Valve For TM GBB Pistol & Rifle
1 x Valken Tank Kits/Parts - SLP QD Air Rig 42 Hose Only
1 x TMC Original Cutting G3 Combat Pants (RG, Waist 32'')
1 x TMC Original Cutting G3 Combat Pants (RG, Waist 34'')
1 x Dominator International Dominator™ Micro 3 HPA Air Regulator W/ Lock
1 x Bell M9 Rubber Parts Set (For KSC M9 Series GBB Pistol)
1 x Bell M9 Metal Nozzle
1 x Double Bell TM M92 Gas Powered Gel Blaster Plastic Parts Set
1 x Double Bell M9 Metal Parts Set (KSC spec)
1 x Army Armament R610-3 Lim-Cat Style 4.3 Hicapa GBB Airsoft Pistol BK
1 x Army Ambidextrous Thumb Rest For Glock
1 x Army Armament R45 Series Green Gas Magazine (18rds)
1 x Army Glock Hammer Assembly
1 x ARMY ARMAMENT TTI Sand Viper Airsoft Magazine Base
1 x Pilot Face Mask w/ Steel Mesh Lower Face Protection Multicam
1 x Army Armament R36 Green Gas Magazine (WE compatible)
1 x Matrix Metal Skull Mask (RG)
1 x Army Armament Full Metal R32 GBB Airsoft Pistol (Black)
1 x Army Armament AUG A3 Carbine AEG OD
1 x EMG/Army Armament R611 Staccato Licensed XL 2011 GBB Airsoft Pistol
1 x Army Armament Extended 1911 Magazine W/Base Pad
1 x Army Armament Full Metal R29 MK IV Gold Cup Match GBB Pistol DE
1 x E&C MK18 Aluminium Outer Barrel (9'' for AEG)
2 x E&C 416 10.5'' Aluminum Outer Barrel (for AEG)
1 x E&C G Series Loading Nozzle (For E&C/TM G18)
1 x E&C Metal M4 160 rds Midcap Magazine BK
1 x E&C Thrust Bearing Polymer Piston Head
2 x E&C EC-45 GBB Airsoft Pistol
2 x E&C Gear Box Switch For Version 2 Gear Box
2 x E&C SI GRIDLOK 7'' PDW(AD Custom Marking Ver. )
1 x E&C XM177E2 (AD Custom, Marking Ver.)
2 x E&C Hicapa Fiber Optic Front Sight
2 x E&C Metal M4 160 rds Midcap Magazine BK (5x Pack)
1 x E&C Upgrade Cylinder Set For L96 Sniper Rifle
1 x E&C High Capacity Silver Wire Ver. 2 Rear Wire Assembly
2 x E&C Quick Change 8mm Bearing Gearbox (Upgraded ver.)
2 x E&C MK18 RIS III SBR Airsoft Rifle AEG (Dark Earth, AD Custom Ver.)
2 x E&C SI GRIDLOK 8.5'' PDW(AD Custom Marking Ver. )
2 x E&C EC-18C Semi/Full Auto GBB Airsoft Pistol
1 x E&C Outlet Valve for E&C / Marui Hi-Capa Series
2 x E&C URG-I SMR MK8 13.5'' AEG (AD Custom Marking Edition)
2 x E&C G Series Loading Nozzle (For E&C/WE G17/19/19x Series)
2 x E&C 417 Heavy Assault Rifle AEG (AD Custom Ver.)
1 x E&C 417 Polymer Mid-cap Magazine 110 BBS
1 x E&C M653 (AD Custom, Marking Ver.)
1 x E&C KAC Style M110 AEG (Perfect edition)
1 x E&C L96 Magazine
1 x E&C MK18 RIS III SBR Airsoft Rifle AEG (Black, AD Custom Ver.)
1 x E&C ODIN Style 9.5'' AEG (AD Custom Ver.)
1 x E&C M100 Spring (330-350fps)
1 x E&C Ver. 2 Cylinder Complete Upgrade Set
1 x G Style 10'' SMR MK4 M-LOK Rail - OD Green
1 x E&C Metal Body Spring Set For M4/ M16 Series AEG
1 x E&C EC-17 Gen 4 GBB Airsoft Pistol
1 x E&C Dartle M4/M16 Magazine (140rds, 5pcs Pack)
1 x E&C G17 Slide (Full metal, engraved marking)
1 x E&C 416 A5 Pistol Grip
1 x E&C EC-17 TTI GBB Airsoft Pistol (AD Custom)
1 x E&C 416D Pistol Grip
1 x E&C URG-I MK4 M-LOK 9.5''M4 AEG BK (AD Custom Marking Ver.)
1 x E&C M90 Spring (290-310fps)
1 x E&C M120 Spring (380-410fps)
1 x E&C EC-17 Gen 5 GBB Airsoft Pistol
1 x E&C G Series Slide Lock Spring
1 x Matrix SFL Kydex Tactical Holster for G Series with X300/X300V Flashlight
1 x Matrix Anti-fog Goggle /w Mask (BK, Built-in 2 Stage Fan)
1 x Matrix 14CCW Threaded Mock Silencer Adapter for Tanaka M700
1 x 5KU AK Scope Mount For T1/T2 Micro Red-dot
1 x Matrix SFL Kydex Tactical Holster for G Series with TLR-1 Flashlight
1 x AD Custom L5 SOCOM 130rds Mid-Cap M4/M16 AEG Mags (5x pack)
1 x Matrix 14CCW Threaded Mock Silencer Adapter for G36 Series
1 x TLR-1 Style Flashlight (Perfect Edition, BK)
1 x Matrix SFL Kydex Quickdraw Holster (X300 Flashlight)
1 x AD Custom L5 SOCOM 130rds Mid-Cap M4/M16 AEG Magazine
1 x Matrix SFL QLS Quick Lock System Kit BK
1 x Matrix SL-K Style Stock (BK)
1 x Matrix SFL Kydex Quickdraw Holster (G17/19/19X/45)
1 x Rail Sections For Geissele SMR HK416 Rail (Dark Brown)
1 x Wolverine Airsoft 18 Wire Harness (Gen. 2)
$17,347.93