CALL US :416-298-3303

Shipping & Returns


General Warranty and Return Policy:


Last Updated: August 31st, 2019

Global Policies (applies to all category based policies):
  1. All sales are final, NO Refund. We only accept exchanges or store credit. If you have any questions for the products we sell, please give us a call, message us on social media, or email us.
  2. We only accept exchanges or store credits within 7 days since the product was purchased in store, or parcel was received by the end user/customer from online orders. The shipping cost of the product and the return shipping to be sent back to us will not be covered for exchange.
  3. If we deem a returned product has been abused by the end user as written within the individual policies below, we reserve the right to refuse repair, or exchange the product. We will not return the product back to the end user unless they pay for the shipping cost to be shipped back. Under this condition, IF we supplied a prepaid return shipping label to the customer earlier on, we may expect the end user to pay for the full price of the prepaid label as well.
  4. We do not guarantee perfect finishing and/or quality of the products we carry; we simply carry what the manufacturer offers us. Depending on the situation, we are capable of testing an airsoft gun before shipping out upon request.
  5. All photos on our website are purely for reference purposes only. Both the packaging and actual product may slightly differ from actuality due to slight changes per batch when procured from manufacturer and/or supplier.
  6. We do not guarantee that the original packaging/box of a product is free from dents or damage. We only guarantee that the product housed within the packaging is of working order and brand new in nature.
  7. All sales are final for products listed as clearance or junk. No warranty is provided under any circumstances whatsoever under said category. Please call or email us at support@airsoftdepot.ca for specific inquiries on clearance or junk items before purchase if unsure.
  8. All sales are also final for consumables and any battery products. Consumables are in regards to products such as (but not limited to) green gas, BBs, silicon oil/grease, and Thunder Bs.

Airsoft Guns:
  1. All airsoft gun sales are FINAL. We do not accept returns of an airsoft gun unless the gun itself is defective.
  2. All airsoft guns* carry a standard, 7 days warranty provided by Airsoft Depot Canada since the day the gun was purchased in store, or parcel was received by the end user/customer from online orders. We encourage customers to test the purchased airsoft gun as soon as possible and contact us within 48 hours of purchase. We only accept exchange for out-of-the-box defective airsoft gun products as long as a replacement of the same product is available. We can only provide a refund if a replacement cannot be provided. Please kindly give us up to 3 business days for a proper response.
  3. *Special instructions bolded or highlighted in red on certain product pages in the product descriptions may override the above rule under this (Airsoft Guns) category.
  4. Any sort of modifications done to the airsoft gun (during the warranty period) internally or externally would automatically void our warranty service. For example, painting your gun, upgrading the internals, or modifying the battery connectors to deans or vice versa with Tamiya connectors and ultimately frying your gun.
  5. Do not attempt to diagnose or repair an airsoft gun if you are faced with an issue/error from the airsoft gun itself. Stop all activity and use of the gun, and report the incident in detail to support@airsoftdepot.ca. Depending on situation and the severity of the matter, we will provide diagnosis and instructions on the issue and/or provide approval for the airsoft gun to be sent back for repair or exchange. Disassembling a newly received airsoft gun voids the warranty.
  6. Assuming the airsoft gun is deemed defective and approved for return to be exchanged or repaired, the end user customer must send it back in its original factory packaging (everything that originally came with the gun such as magazine, instructions booklet, clear plastic bag, etc). The customer is expected to wrap the packaging of the gun in completely opaque wrapping paper or garbage bag and seal well with tape. If certain conditions are met, we may instead provide a prepaid return shipping label and return shipping instructions via email.
  7. If an airsoft gun has been sent/shipped back to us under our approval during the warranty period, the cost of return shipping will be covered as a store credit (assuming a return shipping label was not provided). The store credit can be redeemed and used for future purchases on this website (airsoftdepot.ca). If the airsoft gun has been inspected, repaired, and/or replaced, we will cover the reshipping cost.
  8. If the airsoft gun has been deemed working and not defective upon inspection by our Techs, we will have you pay for the reshipping cost back to your shipping address. If a prepaid return shipping label has been provided with, we will also have you pay for said label as well. The same rule applies if the airsoft gun has been deemed damaged from customer abuse. Customer abuse happens when the end user attempts to repair, modify/tinker/take apart, upgrade the airsoft gun during the warranty period, screws it up, and provides false pretense in regards to the damage itself. Physical damage and mishandling, such as dropping the gun, using low quality Can-Tire/Walmart-tier BBs , or using the wrong rated battery (i.e. using high discharge rate battery on an airsoft gun that s not rated for it) will also count as customer abuse. Abused products do not qualify for any sort of refund or exchange.
  9. Manufacturer included "bonus items" such as, but not limited to cleaning rod, sample bb, bb loader, sling, battery, and charger, are not eligible for warranty. These "bonus items" are included AS IS and are included for testing purposes by the manufacturer. We do not guarantee the proper function of said "bonus items."

Scopes (including red dots):
  1. All scopes (except real steel scopes) are toy scopes, for Aisoft gaming ONLY, NOT for practical shooting
  2. We can not guarantee toy scopes work steel as well as real steel scopes
  3. We can not gurantee toy scopes adjustable as well as real steel scopes

Parts or Gear:
  1. A one-week warranty is only provided for out-of-the-box defective parts or gear products.
  2. We do not guarantee the fitting of the parts/scopes/gears. Please do research or ask up front.
  3. No returns or exchange for all BDUs, shirts, pants, goggles, helmets, and boots/shoes due to hygiene reasons unless it is reported "defective" within 48 hours of purchase. Please kindly do your own research, send us an email, or message us on Facebook for questions on sizing.

HRG Batteries and Chargers Extended Warranty Program
  1. We offer an extended warranty for HRG battery and charger products only of up to 30 days if purchased from Airsoft Depot Canada and its authorised retailers ONLY.
  2. Free one time exchange for defective out of the box items within 30 days of purchase or when parcel is received from Online Orders.
  3. Any signs of end user abuse such as intentional or unintentional damages are not covered by this Warranty Program and voided.
  4. Examples of abuse but not limited to would be damage caused from dropping it from the air, allowing it to be noticeably bent, dented or scraped, wrong connectors plugged or upside down, or allow it to be operated/charged in a bad environment (near a heat source, damp area).
  5. Customer is to send clear photos of 5~6 sides of the issues itself or a video of it for us to be inspect and approve the replacement.
  6. The Customer is only responsible for both shipping and return shipping if there is nothing wrong with the HRG battery and chargers themselves.
  7. Airsoft Depot Canada offers basic troubleshooting for all HRG batteries and chargers bought at authorized retailers via Online Support Center at: support@airsoftdepot.ca. Please give us up to 7 days for a proper response. Please and Thanks.

Continue
1 x FMA LAB PEQ-NGAL LED Light + IR Red Laser BK
2 x WiiTech MP7 (KSC, KWA, Umarex) Top Gas Version Power-up Loading
1 x Picatinny WireGuide System Cable Management Clip
1 x ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (DE)
1 x ET OGL Aiming Device(Red&IR Laser&LED)(Aluminum, BK)
1 x Tactical UT Hot Button Remote Switch (Picatinay, 2.5mm plug, BK)
2 x RA Steel CNC Trigger Set (for WE SCAR)
1 x UT AX Button Dual Switch For Aiming Device (BK,SF&2.5mm Plug)
3 x WiiTech Enhanced Loading Nozzle Assembly for WA
1 x Wire Guide System (M-LOK & Keymod, DE, MA Type)
1 x Sotac Remote Dual Pressure Switch Augmented Pressure Double (SF&Crane plug)
2 x CNC Steel Sear( For WA )
1 x UT AX Button Switch For Aiming Device (DE, 2.5mm Plug)
1 x ET OGL Aiming Device(Red&IR Laser&LED)(Aluminum, DE)
2 x GHK M4 Standard Muzzle Velocity Nozzle
2 x WiiTech A&K SVD Steel Trigger Set
1 x Laser Bore Sight Collimator
2 x WiiTech 92F (T.Marui) Top Gas Version Power-up Loading Nozzle se
1 x SF XC2 Pistol Flashlight/ Red Laser (Delux version)
1 x GHK AKM / GKM-08 Low Muzzle Velocity Nozzle
2 x WiiTech One-way Bearing Piston Head (for Wii Tech gas cylinder)
2 x Double Bell Bolt Set for 98K Shell Ejecting Rifle (Spring Ver.)
1 x Vltor Style Buffer Tube (for WA GBBR)
1 x Tactical Mini ModButton Pressure Remote Switch BK (3.5mm plug)
2 x RA steel CNC firing pin (FOR WE SCAR H)
2 x M. Receiver Rail for T.Marui M870 Tactical Shotgun
1 x UT AX Button Switch For Aiming Device (BK, 2.5mm Plug)
1 x Tactical UT Hot Button Remote Switch MLOK&Keymod, 2.5mm plug, BK
1 x Dual Dovetail Adapter Replaces J-Arm For PVS-14 (Aluminun)
1 x Double Bell AKM (Steel, Real Wood, QD Gearbox, 2023 Ver., Two Magazines Ver.)
1 x E&C KAC Style M110 AEG (Perfect edition)
1 x Cyma M14 AEG (OD, US Ver.)
1 x RA steel CNC trigger assembly (FOR WE SCARH)
1 x Double Bell Bolt Set for 98K Shell Ejecting Rifle (Gas Ver.)
1 x PTS Enhanced Sling Plate – Modular Gen 2 (ESP-M2) GBBR
1 x Double Bell AKS-74U (Steel , Real Wood, QD Gearbox, 2023 Ver., Two Magazines Ver.)
1 x ASP Sling Attachment Point (GBBR)
1 x Double Bell AK74N (Steel, Real Wood, QD Gearbox, 2021 Ver. Two Magazines Ver.)
1 x G&P WA Reinforce Spring
1 x Double Bell SCAR-H Designated Marksman Rifle Tan
1 x E&C 417 Heavy Assault Rifle AEG (AD Custom Ver.)
1 x Cyma M14 AEG (Wood imitation)
1 x RA steel CNC firing pin base (FOR WE SCAR H)
1 x Steel Valve Lock For WA M4
1 x G&P WA Bolt Buffer
1 x PPS M870 Magazine Tube Fixed Bar
1 x PPS M870 Steel Right/Left Fork
1 x PVS-14 Weapon Mount QuickConnect Rail Mount Adapter
1 x RA-Tech Precision inner barrel 6.01 (WE Open Bolt system, 225mm)
1 x RA Adaptor for WE M4 GBB
1 x Double Bell MK12 SPR Mod 1 AEG Airsoft Rifle (Full metal, QD Gearbox)
1 x GHK M4 Low Muzzle Velocity Nozzle
1 x Air-tight Nozzle, Recoil Shock M4
1 x Amomax Tactical Holster For G34 (Gen2)
1 x TMC HM Flash Light Bearing Concealment Holster 1911 (BK)
1 x AMOMAX Fabric Universal Holster
1 x HRG MOLLE Drop-leg Platform (Tan)
1 x AMOMAX Fabric Drop Leg Plate
1 x Matrix SFL Kydex Tactical Holster for G Series with TLR-1 Flashlight
1 x One-way Bearing Piston Head, Recoil Shock System M4 Series (TM Gas Cylinder)
1 x Matrix SFL Kydex Tactical Holster for G Series with X300/X300V Flashlight
1 x TMC HM Flash Light Bearing Concealment Holster G17 (BK)
1 x Matrix SFL 6004 Molle Adaptor
1 x TMC 5X79 Compact Holster (Multicam)
1 x Matrix SFL Kydex Quickdraw Holster (G17/19/19X/45)
1 x S. Receiver Rail for T.Marui M870 Tactical Shotgun
1 x Matrix SFL Kydex Quickdraw Holster (X300 Flashlight)
1 x Cytac/Amomax Holster For Sig M17/P320
1 x Cytac/Amomax Holster For STI/Hicapa (BK, Left-handed)
1 x WST SL Style Modular Holster Adapter (BK)
1 x Cytac/Amomax Gen 2 G Series Holster (Left Hand)
1 x WST SL Style Modular Holster Adapter (CB)
1 x T.Marui M870 barrel mount Installation Tool
1 x Amomax Tactical Holster For M9/M92 Series
1 x CTM HI-CAPA Holster (Fits Flashlight)
1 x Amomax Tactical Holster For G19 (Gen2)
1 x WiiTech NGRS M4 Enhanced Hop-up Chamber
1 x WST 6354 DO Holster For Glock 17/19 with X300/X300U (Multicam)
1 x Amomax Per-Fit Holster (Fits over 80 handguns, BK, Left-hand)
1 x WST 6354 DO Holster For Glock 17/19 with X300/X300U (RG)
1 x Amomax Glock Series Holster
1 x Cytac/Amomax Molle Adapter (Holster/Mag)
1 x SF Style Rapid Deploy Holster For Pistol /W XH15/XH35/X300UH-B
1 x Matrix SFL Belt Holster Drop Adapter (BK)
2 x Matrix SFL Holster Thigh Strap (BK)
1 x HM Brace Glock Kit Holster
1 x TMC HM Flash Light Bearing Concealment Holster M17/P320 (BK)
1 x Modify Modular Gear Set 7mm Ver.2/Ver.3, Speed 16.32:1
1 x SHS Cut Off Lever Ver.3 (Steel)
1 x Modify Aluminum Spring Guide for Type96 Series (9mm)
1 x SHS Shim Set
1 x SHS Spring Set Version2
1 x Modify Safety Catch for Marui M16 series
1 x S&T Kar98k Spring Airsoft Sniper Rifle (Wood Ver.)
1 x Cybergun CANiK TP9 Optic Plate & Charging Handle Set (FDE)
1 x Modify Aluminum Spring Guide for Type96 Series (7mm)
1 x Cyma AK Metal Selector Lever & Safety Set
1 x SK Pistol 6.02 Tightbore Inner Barrel For TM M92
1 x Modify Modular Gear Set 6mm Ver.2/Ver.3, Top Gear 15.05:1 + Ultr
1 x PPS Straight M4/M870 Stock Adaptor
1 x SHS Nylon Tappet Plate (Version 3)
1 x Modify Tappet Ver. 3
1 x PPS Brass Hopup Unit for Type96 / APS2 Airsoft Sniper Rifles
1 x S&T M40A3 Sportline Spring Power Rifle (OD)
1 x Modify Modular Gear Set 7mm Ver.2/Ver.3, Torque 21.6:1
1 x Modify Modular Gear Set 7mm Ver.2/Ver.3, Top Gear 15.05:1 + Ultr
1 x Cybergun CANiK TP9 Optic Plate & Charging Handle Set (Black)
1 x VFC MP7 AEG Original Tappet Plate
1 x Bell M9 Metal Nozzle
1 x Maple Leaf Crazy Jet Inner barrel for Glock (97mm)
1 x PPS M870 Rail
1 x SHS Nylon Tappet Plate (Version 2)
1 x PDI 6.01mm Stainless Steel Precision Tight Bore Barrel (97mm)
1 x Modify Aluminum Piston for Type96 Series
1 x Loading Plate for Well L96 (4401 Series)
1 x WE-TECH X3400 Airsoft Shooting BB Chronograph (Green)
1 x Bell M9 Rubber Parts Set (For KSC M9 Series GBB Pistol)
1 x Modify Cut Off Lever Ver.2 (Steel)
1 x E&C Gear Box Switch For Version 2 Gear Box
1 x PPS Fastigiate M4/M870 Stock Adaptor
1 x Modify Modular Gear Set 6mm Ver.2/Ver.3, Speed 16.32:1
1 x PDI Raven 6.01 Steel Tightore Barrel For Pistol (113mm)
1 x PDI 6.03mm Stainless Steel Precision Tight Bore Barrel (129mm For AAP01)
1 x E&C Upgrade Cylinder Set For L96 Sniper Rifle
1 x CYMA CNC Aluminum Power Up Kit For M24/M705 Sniper Rifle
1 x PDI 6.01mm Stainless Steel Precision Tight Bore Barrel (113mm)
1 x Maple Leaf CNC Trigger Box VSR-10 Sniper Rifles
1 x SHS Speed-Up Gear Set for V2/3 AEG GENIII (18:1, CL14002)
1 x Snow Wolf M24 Full Trigger Set
1 x Double Bell M9 Metal Parts Set (KSC spec)
1 x PPS M870 Shell Catcher
1 x Double Bell TM M92 Gas Powered Gel Blaster Plastic Parts Set
1 x Well MB01/MB05/MB08 Series Steel Trigger Assembly
1 x A&K 8mm Bearing (For M249/M60 HMG Series)
1 x SHS Steel CNC Bearing Bushing 7MM (SHS-ZT0018)
1 x E&C Quick Change 8mm Bearing Gearbox (Upgraded ver.)
1 x A&K M249 Gearbox
1 x Double Bell Version 3 AK Gearbox (Quick Spring Change)
1 x SHS Steel CNC Bearing Bushing 9MM (SHS-ZT0020)
1 x SHS Steel Oilless bushings with cross slot (7mm)
1 x VFC Avalon ECS M4 Complete Gearbox (Model: M120 / Flat Trigger)
1 x Element Ball Bearing Metal 7MM
1 x Modify Ultra Low Resistance Banana Connectors (2 pair/bag)
1 x Modify Dean Ultra Plug (T-Shape Connector) new
1 x E&C High Capacity Silver Wire Ver. 2 Rear Wire Assembly
1 x Double Bell Ver. 3 Wire Assembly
1 x A&K STW/PTW M90 Complete Cylinder (300~320 FPS, Stainless Steel)
1 x Large Tamiya To Small Adaptor
1 x Modify Low resistance Silver-plated cord 180cm
1 x SHS T-shape Connector Wire Set
1 x A&K M4CQB STW Airsoft Professional Training Weapon
1 x A&K STW/PTW M110 Complete Cylinder (400 FPS, Stainless Steel)
$11,045.06