CALL US :416-298-3303

Shipping & Returns


General Warranty and Return Policy:


Last Updated: August 31st, 2019

Global Policies (applies to all category based policies):
  1. All sales are final, NO Refund. We only accept exchanges or store credit. If you have any questions for the products we sell, please give us a call, message us on social media, or email us.
  2. We only accept exchanges or store credits within 7 days since the product was purchased in store, or parcel was received by the end user/customer from online orders. The shipping cost of the product and the return shipping to be sent back to us will not be covered for exchange.
  3. If we deem a returned product has been abused by the end user as written within the individual policies below, we reserve the right to refuse repair, or exchange the product. We will not return the product back to the end user unless they pay for the shipping cost to be shipped back. Under this condition, IF we supplied a prepaid return shipping label to the customer earlier on, we may expect the end user to pay for the full price of the prepaid label as well.
  4. We do not guarantee perfect finishing and/or quality of the products we carry; we simply carry what the manufacturer offers us. Depending on the situation, we are capable of testing an airsoft gun before shipping out upon request.
  5. All photos on our website are purely for reference purposes only. Both the packaging and actual product may slightly differ from actuality due to slight changes per batch when procured from manufacturer and/or supplier.
  6. We do not guarantee that the original packaging/box of a product is free from dents or damage. We only guarantee that the product housed within the packaging is of working order and brand new in nature.
  7. All sales are final for products listed as clearance or junk. No warranty is provided under any circumstances whatsoever under said category. Please call or email us at support@airsoftdepot.ca for specific inquiries on clearance or junk items before purchase if unsure.
  8. All sales are also final for consumables and any battery products. Consumables are in regards to products such as (but not limited to) green gas, BBs, silicon oil/grease, and Thunder Bs.

Airsoft Guns:
  1. All airsoft gun sales are FINAL. We do not accept returns of an airsoft gun unless the gun itself is defective.
  2. All airsoft guns* carry a standard, 7 days warranty provided by Airsoft Depot Canada since the day the gun was purchased in store, or parcel was received by the end user/customer from online orders. We encourage customers to test the purchased airsoft gun as soon as possible and contact us within 48 hours of purchase. We only accept exchange for out-of-the-box defective airsoft gun products as long as a replacement of the same product is available. We can only provide a refund if a replacement cannot be provided. Please kindly give us up to 3 business days for a proper response.
  3. *Special instructions bolded or highlighted in red on certain product pages in the product descriptions may override the above rule under this (Airsoft Guns) category.
  4. Any sort of modifications done to the airsoft gun (during the warranty period) internally or externally would automatically void our warranty service. For example, painting your gun, upgrading the internals, or modifying the battery connectors to deans or vice versa with Tamiya connectors and ultimately frying your gun.
  5. Do not attempt to diagnose or repair an airsoft gun if you are faced with an issue/error from the airsoft gun itself. Stop all activity and use of the gun, and report the incident in detail to support@airsoftdepot.ca. Depending on situation and the severity of the matter, we will provide diagnosis and instructions on the issue and/or provide approval for the airsoft gun to be sent back for repair or exchange. Disassembling a newly received airsoft gun voids the warranty.
  6. Assuming the airsoft gun is deemed defective and approved for return to be exchanged or repaired, the end user customer must send it back in its original factory packaging (everything that originally came with the gun such as magazine, instructions booklet, clear plastic bag, etc). The customer is expected to wrap the packaging of the gun in completely opaque wrapping paper or garbage bag and seal well with tape. If certain conditions are met, we may instead provide a prepaid return shipping label and return shipping instructions via email.
  7. If an airsoft gun has been sent/shipped back to us under our approval during the warranty period, the cost of return shipping will be covered as a store credit (assuming a return shipping label was not provided). The store credit can be redeemed and used for future purchases on this website (airsoftdepot.ca). If the airsoft gun has been inspected, repaired, and/or replaced, we will cover the reshipping cost.
  8. If the airsoft gun has been deemed working and not defective upon inspection by our Techs, we will have you pay for the reshipping cost back to your shipping address. If a prepaid return shipping label has been provided with, we will also have you pay for said label as well. The same rule applies if the airsoft gun has been deemed damaged from customer abuse. Customer abuse happens when the end user attempts to repair, modify/tinker/take apart, upgrade the airsoft gun during the warranty period, screws it up, and provides false pretense in regards to the damage itself. Physical damage and mishandling, such as dropping the gun, using low quality Can-Tire/Walmart-tier BBs , or using the wrong rated battery (i.e. using high discharge rate battery on an airsoft gun that s not rated for it) will also count as customer abuse. Abused products do not qualify for any sort of refund or exchange.
  9. Manufacturer included "bonus items" such as, but not limited to cleaning rod, sample bb, bb loader, sling, battery, and charger, are not eligible for warranty. These "bonus items" are included AS IS and are included for testing purposes by the manufacturer. We do not guarantee the proper function of said "bonus items."

Scopes (including red dots):
  1. All scopes (except real steel scopes) are toy scopes, for Aisoft gaming ONLY, NOT for practical shooting
  2. We can not guarantee toy scopes work steel as well as real steel scopes
  3. We can not gurantee toy scopes adjustable as well as real steel scopes

Parts or Gear:
  1. A one-week warranty is only provided for out-of-the-box defective parts or gear products.
  2. We do not guarantee the fitting of the parts/scopes/gears. Please do research or ask up front.
  3. No returns or exchange for all BDUs, shirts, pants, goggles, helmets, and boots/shoes due to hygiene reasons unless it is reported "defective" within 48 hours of purchase. Please kindly do your own research, send us an email, or message us on Facebook for questions on sizing.

HRG Batteries and Chargers Extended Warranty Program
  1. We offer an extended warranty for HRG battery and charger products only of up to 30 days if purchased from Airsoft Depot Canada and its authorised retailers ONLY.
  2. Free one time exchange for defective out of the box items within 30 days of purchase or when parcel is received from Online Orders.
  3. Any signs of end user abuse such as intentional or unintentional damages are not covered by this Warranty Program and voided.
  4. Examples of abuse but not limited to would be damage caused from dropping it from the air, allowing it to be noticeably bent, dented or scraped, wrong connectors plugged or upside down, or allow it to be operated/charged in a bad environment (near a heat source, damp area).
  5. Customer is to send clear photos of 5~6 sides of the issues itself or a video of it for us to be inspect and approve the replacement.
  6. The Customer is only responsible for both shipping and return shipping if there is nothing wrong with the HRG battery and chargers themselves.
  7. Airsoft Depot Canada offers basic troubleshooting for all HRG batteries and chargers bought at authorized retailers via Online Support Center at: support@airsoftdepot.ca. Please give us up to 7 days for a proper response. Please and Thanks.

Continue
1 x WELL MB02 VSR-10 G-SPEC Bolt Action Airsoft Sniper Rifle W/ Bipod&Scope
1 x WELL M24 Air-cocking Sniper Rifle with Scope & Bipod
1 x WELL Pro PPK-20 SMG (Advance Ver., 30RPS, Steel Upper Cover)
1 x WELL Pro PCC X9 SMG (Gen2, ETU Ver., 30RPS)
1 x WELL Pro MB03AE M700 Upgrade Version W/ Scope & Bipod
1 x WiiTech Enhanced Loading Nozzle Assembly for WA
1 x PPS M870 Rail
1 x UT AX Button Switch For Aiming Device (DE, 2.5mm Plug)
1 x FMA Modlite ModButton Lite (2.5mm Plug, DE)
1 x ACM LA-5C PEQ15 Red/IR Laser/LED Weapon Light (BK)
1 x Tactical UT Hot Button Remote Switch (Picatinay, 3.5mm plug, BK)
1 x Tactical UT Hot Button Remote Switch MLOK&Keymod, 3.5mm plug, BK
1 x Picatinny WireGuide System Cable Management Clip
1 x ACM Aluminum PERST-4 Aiming Laser PEQ Green/IR Laser
1 x Wire Guide System (M-LOK & Keymod, BK, MA Type)
1 x FMA Remote Pressure Switch for Laser Devices (Style: Crane Plug / Black)
1 x UT AX Button Dual Switch For Aiming Device (BK,SF&2.5mm Plug)
1 x UT AX Button Dual Switch For Aiming Device (BK,SF&3.5mm Plug)
1 x Odin Innovations M12 Sidewinder Speed BB Loader (BK)
1 x BB Loader (100 rds)
2 x SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 450mm
1 x Well MB01/MB05/MB08 Series Steel Trigger Assembly
1 x VFC Avalon ECS M4 Complete Gearbox (Model: M120 / Flat Trigger)
1 x SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 285mm
1 x E&C Quick Change 8mm Bearing Gearbox (Upgraded ver.)
2 x Maple Leaf CNC Trigger Box VSR-10 Sniper Rifles
1 x Snow Wolf M24 Full Trigger Set
2 x Modify Aluminum Spring Guide for Type96 Series (9mm)
1 x SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 300mm
1 x Loading Plate for Well L96 (4401 Series)
1 x AD Custom L5 SOCOM 130rds Mid-Cap M4/M16 AEG Mags (5x pack)
1 x Modify Tappet Ver. 3
1 x WST 3.5 inch 14mm CCW Flash Tracer Surpressor BK
1 x PTS Enhanced Polymer Magazine (AEG, BK, 2023 Ver.)
1 x ESHOOTER KESTREL V2 MOSFET FOR V2 GEARBOX (Bluetooth ready, Rear wired)
1 x DyTac Drop-In MOSFET Unit (Rear Wiring / T Plug)
1 x SHS Spring Set Version2
1 x Dominator™ Air-sealed Chamber for DM870 Gas Shotgun Shell
1 x WST 6.3 inch 14mm CCW Flash Tracer Surpressor BK
1 x PTS Dead Air Sandman-K Tracer Unit DE
1 x Element Ball Bearing Metal 7MM
1 x ESHOOTER KESTREL V2 BASIC Airsoft ETU (Rear wired)
1 x Modify Modular Gear Set 7mm Ver.2/Ver.3, Torque 21.6:1
1 x SHS Nylon Tappet Plate (Version 3)
1 x PTS Dead Air Sandman-K Tracer Unit BK
1 x PPS XM26 Magazine (5 Shells)
2 x MBUS Pro Metal Front/Rear Sights (With marking)
2 x 5KU Spitfire Flame Tracer 14mm CCW
1 x A&K 8mm Bearing (For M249/M60 HMG Series)
1 x KAC Style Rear Flip Sight
1 x PTS Dead Air Sandman-L Tracer Unit BK
1 x SHS Steel CNC Bearing Bushing 7MM (SHS-ZT0018)
2 x PERUN V2 Optical Mosfet - Rear Wired
1 x GATE USB-Link for GATE Control Station App
1 x Modify Cut Off Lever Ver.2 (Steel)
1 x DD Style Fixed Front&Rear sights (Marking edition)
1 x PTS EPM For Tokyo Marui Recoil Shock M4/SCAR (BK)
2 x PTS Dead Air Sandman-S Tracer Unit DE
1 x HRG Drop Pouch/Fanny Pack For AVS JPC CPC (Multicam Black)
1 x 5KU JMAC Style HRD MLOK Handstop
1 x Emersongear 18cm*11cm Pouch (WG)
1 x VSG-S Grip For Rail (FG)
1 x G Style 13.5'' SMR MK16 M-LOK Rail BK
1 x Detachable Swivel QD Sling Mount
1 x A&K Masada Rail Kit (DE)
1 x GP Small Utility Pouch (RG)
1 x Keymod System GolfBall Pattern Short Grip (Silver)
1 x CYMA M14 Socom Front Set
1 x FMA TD Grip For M-LOK SYS BK
1 x BCM Gunfighter KAG 1913 (Rail, BK)
1 x HRG Pistol/Rifle Magazine Pouch (Crye Precision Mulitcam)
1 x Zenitco Style PK-6 Vertical Grip (Nylon Ver.)
1 x MI Style Keymod Rail (6061 T6 Aluminum, Steel Barrel Nut, 10.5''
1 x AD Custom DD MK18 II 9.5'' BK (Marking Ver.)
1 x Emerson 5.56&Pistol Double Open Top Magazine Pouch (AOR1)
1 x Evolution Aluminum Vertical Grip (Long, Keymod)
1 x BD SMR Rail G Style Ring for Umarex/VFC 416
1 x CQD Front Attachment Point
1 x 5KU M-Lok AK-47 / 74 Universal Handguard
1 x BCM Gunfighter KAG (M-LOK, BK)
1 x MI Style M-Lok Rail (6061 T6 Aluminum, Steel Barrel Nut, 9.25'')
1 x AD Custom Polycarbonate Lens Protector (Dia. 30mm, TLR1/T-Eagle)
1 x AD Custom Polycarbonate Lens Protector (Dia. 38mm, For MRO etc.)
1 x LINK Angled HandStop W/ Cable Management (M-LOK/Keymod, DE)
1 x HRG Pistol/Rifle Magazine Pouch (CB)
1 x DD Style Front Sling Point (Type B, Marking ver.)
1 x AD Custom DD MK18 II 9.5'' CB (Marking Ver.)
1 x PPS Brass Hopup Unit for Type96 / APS2 Airsoft Sniper Rifles
1 x SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 455mm
1 x Madbull Stainless Steel 6.03mm Tightbore Barrel - 509mm
1 x SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 363mm
1 x SHS AEG 6.03MM Precision Inner Barrel Stainless Steel - 400mm
1 x SHS Steel CNC Bearing Bushing 9MM (SHS-ZT0020)
1 x E&C EC-17 Gen 4 GBB Airsoft Pistol
1 x Eshooter Flare M BT Tracer/chrnograph Unit (RGB Rainbow color, Bluetooth Ver.)
1 x E&C EC-18C Semi/Full Auto GBB Airsoft Pistol
1 x Gate TITAN AEG Mosfet System DROP-in MODULE Rear Wired V2 Basic
1 x EMG / SAI Utility Standard Gas Magazine (For RMR-cut Ver.)
1 x Pyramex I-FORCE
1 x Double Bell G19 Green Gas Magazine (2019 Ver.)
1 x Pyramex Highlander Plus
1 x Armorer Works VX9 Series (RMR Slide Ver. ) 23rds Gas Magazine
1 x Armorer Works G Series Magazine (BK, 25 rounds, TM/WE compatibl
1 x WE CO2 G-Series Magazine
1 x EMG / SAI Utility Compact Gas Magazine (For RMR-cut Ver.)
1 x Army TTI G17 Gas Magazine With Base (Fits Umarex/VFC)
1 x Armorer Works Adaptive Drum Magazine - VX/ G Series BK
1 x Valken V-TAC Tango Thermal Goggle Deluxe Set BK (/w RX Insert)
1 x E&C G19 Green Gas Magazine (BK, For TM/WE Glock 19)
1 x EMG / SALIENT ARMS INTERNATIONAL™ BLU GAS STANDARD MAGAZINE
1 x Armorer Works VX9/Glock Series (Standard Slide Ver. ) Magazine
1 x AW VX 7 / 9 (Optics Ready ver) Gas Magazine Rubber Gas Route
1 x Matrix Tactical SF Respirator Half Mask (Functional)
1 x Matrix Tactical Dual Respirator Half Mask
1 x Matrix Iron Face Padded Lower Half Face Mask (Color:BK)
1 x TMC MANDIBLE For OC Highcut Helmet - Coyote Brown
1 x Matrix Lower Face Mask (RG, Mini Version For Children/Girls etc.
1 x The Knight tactical Face Mask (Gray)
1 x TMC Plastic Mask for SF Rail (BK)
1 x Matrix Tactical SF Respirator Half Mask (Functional W/ Microphone)
1 x Matrix Tactical SF Respirator Filter
1 x Ghost Recon style Mesh Face Mask
1 x Valken Zulu Airsoft Mesh Mask
1 x Matrix Iron Face Padded Lower Half Face Mask W/ Ear Cover(Color:BK)
1 x Matrix Iron Face Padded Lower Half Face Mask (Color:Woodland)
1 x The Knight tactical Face Mask (OD)
1 x The Knight tactical Face Mask (Tan)
$9,031.02